Toward Optimizing Electrospun Nanofiber Fuel Cell Catalyst Layers: Polymer–Particle Interactions and Spinnability
Source abstract
Abstract
We investigate the effect of the poly(acrylic acid) (PAA) carrier polymer concentration on the microstructure and rheological properties of catalyst inks for electrospun polymer–electrolyte membrane fuel-cell catalyst layers. Characterization of an ink microstructure using oscillatory shear rheology showed that the catalyst particles (platinum on carbon) are significantly agglomerated in the absence of PAA or an ionomer. Both the ionomer and PAA promoted the stability of the particles against agglomeration via electrosteric stabilization by adsorbing onto the particle surface. Increasing the PAA concentration increased the stability of the particles (or reduced the agglomerated structure) due to increasing PAA coverage onto the free surface area of the particles. However, beyond a certain increase in concentration, PAA was found to predominantly remain as an excess free polymer in the ink due to an insufficient free/available surface area on the particles for further PAA coverage. Extensional rheology measurements demonstrated that PAA enhances the extensional viscosities of the inks. Consequently, increasing the PAA concentration in the ink promoted the evolution of uniform nanofibers. However, beyond a certain concentration, a significant increase in the shear viscosities of the inks led to defective fiber morphologies because of the onset of flow instabilities. Electrochemical performance comparisons between catalyst layers with different PAA concentrations showed maximum performance at the PAA concentration that led to the least agglomerated structure of the catalyst, most uniform fiber morphologies, and low concentrations of free (non-adsorbing) PAA in the electrode. These results provide a rationale for optimization of electrospun catalyst nanofibers for both spinnability and electrochemical performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrospun Nanofibers in Biomedical Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States
Mechanical and Industrial Engineering, University of Massachusetts, Amherst, Massachusetts 01003, United States, 60439, USA
Funding
Office of Energy Efficiency and Renewable Energy
References (54)
Show source-provided references
1. 10.1016/j.jpowsour.2003.12.05510.1016/j.jpowsour.2003.12.055 ↗
2. 10.1021/cm401445h10.1021/cm401445h ↗
3. 10.1002/cssc.20110024510.1002/cssc.201100245 ↗
4. 10.1016/j.jpowsour.2009.11.09210.1016/j.jpowsour.2009.11.092 ↗
5. 10.1016/j.jpowsour.2006.05.03310.1016/j.jpowsour.2006.05.033 ↗
6. 10.1002/celc.20180028310.1002/celc.201800283 ↗
7. 10.1149/2.0651501jes10.1149/2.0651501jes ↗
8. 10.1073/pnas.150715911210.1073/pnas.1507159112 ↗
9. 10.1016/j.nanoen.2020.10479110.1016/j.nanoen.2020.104791 ↗
10. 10.1149/1.321063510.1149/1.3210635 ↗
11. 10.1016/j.coelec.2020.03.00710.1016/j.coelec.2020.03.007 ↗
12. 10.1088/0957-4484/17/14/R0110.1088/0957-4484/17/14/R01 ↗
13. 10.1039/c1ee02201f10.1039/c1ee02201f ↗
14. 10.1016/j.polymer.2008.02.00210.1016/j.polymer.2008.02.002 ↗
15. 10.1016/j.polymer.2005.03.01110.1016/j.polymer.2005.03.011 ↗
16. 10.1016/S0032-3861(03)00616-510.1016/S0032-3861(03)00616-5 ↗
17. 10.1021/ma035689h10.1021/ma035689h ↗
18. 10.1016/j.polymer.2006.04.05010.1016/j.polymer.2006.04.050 ↗
19. 10.1021/ma070893g10.1021/ma070893g ↗
20. 10.1115/1.300557710.1115/1.3005577 ↗
21. 10.1149/2.0151907jes10.1149/2.0151907jes ↗
22. 10.1021/acsami.9b1136510.1021/acsami.9b11365 ↗
23. 10.1021/acsaem.9b0118110.1021/acsaem.9b01181 ↗
24. 10.1002/aic.69022020210.1002/aic.690220202 ↗
25. 10.1557/mrc.2019.14410.1557/mrc.2019.144 ↗
26. 10.1016/j.electacta.2017.05.06610.1016/j.electacta.2017.05.066 ↗
27. 10.1002/fuce.20170020910.1002/fuce.201700209 ↗
28. 10.1039/c7ta07255d10.1039/c7ta07255d ↗
29. Kabir, S.; Van Cleve, T.; Khandavalli, S.; Medina, S.; Pylypenko, S.; Mauger, S. A.; Ulsh, M.; Neyerlin, K. C. Towards Optimizing Electrospun Nanofiber Fuel Cell Catalyst Layers: Microstructure and Pt-Accessibility. Submitted to ACS Applied Energy Materials (Under Review) 2021.10.1021/acsaem.0c03073 ↗
30. 10.1122/1.503800010.1122/1.5038000 ↗
31. 10.1122/1.235759510.1122/1.2357595 ↗
32. 10.1021/je00019a01610.1021/je00019a016 ↗
33. 10.1063/1.86854010.1063/1.868540 ↗
34. 10.1016/S0377-0257(97)00022-010.1016/S0377-0257(97)00022-0 ↗
35. Larson R. G. · 1999
36. 10.1017/CBO978051197797810.1017/CBO9780511977978 ↗
37. 10.1016/0927-7757(96)03699-010.1016/0927-7757(96)03699-0 ↗
38. 10.1021/acsami.8b1503910.1021/acsami.8b15039 ↗
39. 10.1149/1.278096110.1149/1.2780961 ↗
40. 10.1122/1.133238910.1122/1.1332389 ↗
41. Mckinley, G. H. Dimensionless Groups For Understanding Free Surface Flows of Complex Fluids. In Soc. Rheol. Bull; 2005; Vol. 2005, pp. 6–9.
42. 10.1007/BF0141550610.1007/BF01415506 ↗
43. 10.1007/s00397-007-0247-y10.1007/s00397-007-0247-y ↗
44. 10.1039/c8sm01925h10.1039/c8sm01925h ↗
45. 10.1063/1.85768310.1063/1.857683 ↗
46. 10.1017/S002211207100087910.1017/S0022112071000879 ↗
47. 10.1021/acs.macromol.0c0007710.1021/acs.macromol.0c00077 ↗
48. 10.1122/1.486462010.1122/1.4864620 ↗
49. 10.1002/aic.1370410.1002/aic.13704 ↗
50. 10.1002/polb.2454410.1002/polb.24544 ↗
51. 10.1016/j.polymer.2008.04.02510.1016/j.polymer.2008.04.025 ↗
52. 10.1038/nphys168210.1038/nphys1682 ↗
53. 10.1007/BF0036650410.1007/BF00366504 ↗
54. 10.1021/acsaem.9b0103710.1021/acsaem.9b01037 ↗