Investigating the damage mechanism of concrete in Alpine Gobi under the combined action of freeze-thaw cycles and wind-blown sand and gravel
Source abstract
Abstract
Freeze-thaw cycles and wind-blown sand and gravel (WBS/G) have severely degraded the concrete piers along the Golmud-Korla Railway, which substantially compromises their structural integrity. To address this challenge, this study employs the airflow sand injection technique to determine the anti-erosion characteristics of concrete undergoing freeze-thaw cycles, with a focus on its resistance to WBS/G. An increased number of freeze-thaw cycles reduces the compactness of the aggregate and reduces the strength of the mortar on the concrete surface. This leads to the breakdown of the cement coating. Simultaneously, internal degradation of the void structure exacerbates the increase in void ratio, prolonging the accelerated damage stage during the erosion process induced by WBS/G. Consequently, the overall damage to the concrete breaks more severely. Following 200 freeze-thaw cycles, the level of erosion of the concrete rises by 19.9-49.2 mg/cm² compared to unfrozen concrete. At lower freeze-thaw cycle counts, the erosion rate caused by small-sized gravel is higher. However, at high freeze-thaw cycle counts, the mortar and coarse aggregate are not as firmly bonded as they could be, leading to a significant increase in erosion caused by large-sized gravel. This is attributed to the larger erosion range and higher kinetic energy of large-sized gravel, which exacerbates damage during WBS/G exposure. Concrete's rate of erosion and compressive strength exhibit a strong negative linear correlation prior to and following freeze-thaw cycles, with the coefficient of determination (R²) exceeding 0.80. This study builds upon the classical Bitter theoretical model by incorporating the compressive strength factor, particle size function, and freeze-thaw damage factor. The goal is to develop a WBS/G erosion resistance model for concrete undergoing freeze-thaw cycles. This model serves as a scientific design framework for durability and maintenance of concrete constructions in cold climates of Northwest China, offering insights into erosion mechanisms and practical guidance for mitigating freeze-thaw-induced degradation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Erosion and Abrasive Machining · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Frost heave evaluation and prediction of high-speed railway subgrade with coarse filler in high altitude seasonal frozen region, northwest China
2. Projected climate change and its impacts on glaciers and water resources in the headwaters of the Tarim River, NW China/Kyrgyzstan10.1007/s10584-022-03343-w ↗
3. Assessment of extreme temperature in the Qinghai-Xizang plateau and surrounding areas10.4236/oalib.1111866 ↗
4. Study on mechanical properties and damage mechanism of recycled concrete containing silica fume in freeze-thaw environment10.1016/j.conbuildmat.2023.130872 ↗
5. Durability of manufactured-sand-reinforced concrete and its wet joint prepared in plateau environment under corrosion, Freeze-Thaw Cycle and Their Coupling Effect10.3390/buildings14092697 ↗
6. Investigation of microstructural damage in air-entrained recycled concrete under a freeze-thaw environment10.1016/j.conbuildmat.2020.121219 ↗
7. The improvement of freezing-thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel
8. Effect of silica fume on frost resistance and recyclability potential of recycled aggregate concrete under freeze-thaw environment10.1016/j.conbuildmat.2023.134109 ↗
9. Influence of pore structures on the frost resistance of concrete10.1680/jmacr.15.00471 ↗
10. Review on the deterioration and approaches to enhance the durability of concrete in the freeze-thaw environment10.1016/j.conbuildmat.2022.126371 ↗
11. Freeze-thaw resistance of Ultra-High performance concrete: dependence on concrete composition10.1016/j.conbuildmat.2021.123523 ↗
12. Progress and prospects of climate change impacts on hydrology in the arid region of northwest China10.1016/j.envres.2014.12.029 ↗
13. Alluvial fan types, distribution, and formation: a global perspective10.1127/zfg/2024/0826 ↗
14. Late Quaternary hydroclimatic variations in the hyper-arid Dunhuang Basin, northwestern China10.1016/j.palaeo.2023.111693 ↗
15. Fractal of the Gobi surface sediment components and its variability characteristics10.1016/j.catena.2022.106525 ↗
16. Study on erosion damage of aeolian sand concrete by wind-grit flow in Gobi gale area: laboratory experiment and numerical simulation
17. Study of erosion wear to concrete by different gravel particle sizes: Laboratory test and numerical simulation
18. Study of the anti-abrasion performance and mechanism of coral reef sand concrete10.1016/j.conbuildmat.2021.123263 ↗
19. Experimental study into erosion damage mechanism of concrete materials in a wind-blown sand environment10.1016/j.conbuildmat.2016.02.137 ↗
20. Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test10.1016/j.conbuildmat.2016.09.117 ↗
21. Analysis of the damage to the aeolian sand concrete surfaces caused by wind-sand erosion10.3151/jact.15.724 ↗
22. Tribo-performance of polyester hybrid composites: damage assessment and parameter optimization using Taguchi design10.1016/j.matdes.2008.04.057 ↗
23. Durability of Basalt fiber-reinforced aeolian sand concrete in extreme environments: Resistance to wind-sand erosion and salt freeze-thaw cycles10.1016/j.conbuildmat.2024.139264 ↗
24. Durability deterioration mechanism of aeolian sand concrete under carbonization & freeze-thaw conditions
25. Stability of fresh concrete and its effect on late-age durability of reinforced concrete: An overview
26. Effects of interactions between leaching, frost action and abrasion on the surface deterioration of concrete10.1016/j.conbuildmat.2017.05.137 ↗
27. Deterioration mechanism of alkali-activated slag and fly ash blended recycled aggregate concrete under freeze-thaw cycles
28. Investigation of chloride transport in concrete subject to the coupling of chloride erosion and freeze-thaw action at the same time scale
29. Performance evolution and damage constitutive model of high air content hydraulic concrete coupled freeze-thaw and loads10.1016/j.conbuildmat.2024.139015 ↗
30. Coupled effects of the freeze-thaw cycles and salt erosion on the performance of recycled aggregate concrete
31. Coupled effect of the freeze-thaw cycles and salt erosion on the performance of concretes modified with nanoparticles10.1016/j.coldregions.2023.104046 ↗
32. Study on durability of concrete under alternating positive and negative temperature curing in plateau area10.1016/j.conbuildmat.2024.137008 ↗
33. Durability of Manufactured-Sand-Reinforced Concrete and Its Wet Joint Prepared in Plateau Environment under Corrosion, Freeze-Thaw Cycle and Their Coupling Effect10.3390/buildings14092697 ↗
34. Study on the durability deterioration law of marine concrete with nano-particles under the coupled effects of freeze-thaw cycles, flexural fatigue load and Cl- erosion
35. Effect of wind-sand erosion on frost resistance durability of hydraulic engineering concrete in cold irrigation area
36. JGJ 55-2011 · 2011
37. GB/T 50082-2099 · 2009
38. The Beaufort scale of winds-its relevance, and its use by sailors10.1002/wea.153 ↗
39. Frost resistance and life prediction of equal strength concrete under negative temperature curing10.1016/j.conbuildmat.2023.132278 ↗
40. Influence of damage degree on the degradation of concrete under freezing-thawing cycles10.1016/j.conbuildmat.2020.119903 ↗
41. Durability deterioration mechanism and carbonation depth prediction model of tunnel lining concrete in high-altitude cold area under low-pressure-freeze-thaw conditions10.1016/j.conbuildmat.2024.139259 ↗
42. Microstructural damage evolution and its effect on fracture behavior of concrete subjected to freeze-thaw cycles10.1177/1056789518787025 ↗
43. Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures10.1016/j.conbuildmat.2022.126725 ↗
44. Abrasion resistance of concrete under coupled debris flow and freeze-thaw cycles10.1016/j.wear.2023.204805 ↗
45. Concrete erosion mechanism and model research under the action of wind gravel flow in Gobi gale area10.1016/j.conbuildmat.2023.133940 ↗
46. The performance and mechanism of abrasion damage of steel structure coatings under the action of wind gravel flow: laboratory experiment and numerical simulation10.1016/j.triboint.2023.109089 ↗
47. Erosion wear resistance of graphite/epoxy resin coating under strong windblown sand and grit flow
48. Study on the resistance of basalt fiber concrete to erosion of building structure by wind gravel flow10.1016/j.conbuildmat.2024.138761 ↗
49. Abrasion and impact resistance of concrete before and after exposure to freezing and thawing cycles10.1016/j.conbuildmat.2019.04.206 ↗
50. Damage mechanism and modeling of concrete in freeze–thaw cycles: a review10.3390/buildings12091317 ↗
51. Effect of curing temperature freeze–thaw failure mechanism and damage model of equal-strength air-entrained concrete10.1371/journal.pone.0312890 ↗
52. Review on the deterioration and approaches to enhance the durability of concrete in the freeze–thaw environment10.1016/j.conbuildmat.2022.126371 ↗
53. A study of erosion phenomena, part I10.1016/0043-1648(63)90003-6 ↗
54. A study of erosion phenomena, part II10.1016/0043-1648(63)90073-5 ↗
55. Study on damage rules on concrete under corrosion of freeze-thaw and saline solution10.1016/j.conbuildmat.2021.124617 ↗
56. Y.G. Wu, Freeze-thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
57. Salt-freeze resistance and life prediction of geopolymer recycled concrete mixed with rice husk ash and modified rubber particles10.1016/j.conbuildmat.2024.138433 ↗