Existing theories of concrete spalling and test methods relating to moisture migration patterns upon exposure to elevated temperatures – A review
Source abstract
Abstract
The present paper reviews some recent research on concrete spalling theories and existing test methods of moisture migration patterns that occur when concrete is exposed to elevated temperatures. Experimental investigations on these systems in fire conditions are not as extensively conducted as under normal temperature conditions. Therefore, only a few representative experimental procedures are discussed in the paper. A summary of small-, medium- and large-scale experimental tests where water pooling was evident is also presented. This is then presented in relation to the design recommendations that are based on previously discussed experiments. Finally, some future perspectives on the subject matter are also presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Fire dynamics and safety research · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Performance of high strength concrete subjected to elevated temperatures: a review10.1007/s10694-018-0791-2 ↗
2. Post-fire damage assessment and capacity based modeling of concrete exposed to elevated temperature10.1177/1056789519881484 ↗
3. Guerrieri · 2008
4. Gerasimidis · 2021
5. Observations on spalling10.1111/j.1151-2916.1934.tb19296.x ↗
6. Jansson · 2008
7. Effects of elevated temperatures on properties of concrete10.1016/j.firesaf.2007.01.003 ↗
8. Stress-strain curves for high strength concrete at elevated temperatures10.1061/(ASCE)0899-1561(2004)16:1(84) ↗
9. Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission, (in English)10.1016/j.conbuildmat.2012.06.070 ↗
10. Experimental study on the spalling behaviour of ultra-high strength concrete in fire10.1016/j.conbuildmat.2020.120334 ↗
11. Effect of temperature on some of the properties of materials
12. Behaviour of concrete under thermal steady state and non‐steady state conditions10.1002/fam.810010305 ↗
13. M. Guerrieri, S. Fragomeni, C. Sanabria, W.M. Lee, and E. Pazmino, "Australian Large Scale Structural Fire Test Facility for Concrete Tunnel Linings," in Proceedings of the 6th International Workshop on Concrete Spalling due to Fire Exposure, 2020: The University of Sheffield, pp. 122–131.
14. Direct comparison of multi and single-phase models depicting the drying process of refractory castables
15. Numerical and experimental analysis of chemical dehydration, heat and mass transfers in a concrete hollow cylinder submitted to high temperatures10.1016/S0017-9310(03)00381-8 ↗
16. Spalling of High-Strength Silica Fume Concrete in Fire
17. Mechanical properties of high-strength concrete after fire10.1016/j.cemconres.2003.11.007 ↗
18. K. Hertz, "Heat induced explosion of dense concretes. Report 166," CIB W14/84/33 (DK). Institute of Building Design (now Department of Civil …, 1984.
19. V.K. R. Kodur and M.A. Sultan, Structural behaviour of high strength concrete columns exposed to fire, 1998.10.1139/l98-023 ↗
20. Spalling in high strength concrete exposed to fire: concerns, causes, critical parameters and cures
21. Limits of spalling of fire-exposed concrete, (in English)10.1016/S0379-7112(02)00051-6 ↗
22. Critical factors governing the fire performance of high strength concrete systems10.1016/j.firesaf.2006.10.006 ↗
23. The fire resistance of high-strength concrete containing natural zeolites10.1016/j.cemconcomp.2020.103897 ↗
24. HPC Subjected To High Temperature: A Study On Intrinsic And Mechanical Damage
25. The influence of pore pressure on fracture behaviour of Normal-Strength and High-Performance Concretes at high temperature10.1016/j.cemconcomp.2019.103388 ↗
26. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
27. Fibers, percolation, and spalling of high-performance concrete
28. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
29. F. Sultangaliyeva, B. Fernandes, H. Carré, P. Pimienta, C. Borderie, and N. Roussel, "Experimental contribution to the optimization of the choice of polypropylene fibers in concrete for its thermal stability," in 6th International Workshop on Concrete Spalling due to Fire Exposure, 2019.
30. Polypropylene fibres and micro cracking in fire exposed concrete
31. Polypropylene fibres in heated concrete. Part 2: Pressure relief mechanisms and modelling criteria10.1680/macr.2007.00042 ↗
32. An experimental method for assessing the spalling sensitivity of concrete mixture submitted to high temperature10.1016/j.cemconcomp.2012.04.002 ↗
33. Experimental study on fire resistance of 200-300 mpa high strength concrete with synthetic fiber and steel fiber10.3130/aijs.85.673 ↗
34. Effects of recycled steel and polymer fibres on explosive fire spalling of concrete10.1007/s10694-019-00817-9 ↗
35. Quantification of evolving moisture profiles in concrete samples subjected to temperature gradient by means of rapid neutron tomography: Influence of boundary conditions, hygro‐thermal loading history and spalling mitigation additives10.1111/str.12371 ↗
36. R. Jansson, Fire spalling of concrete – A historical overview, MATEC Web of Conferences, vol. 6, p. 01001, 2013. [Online]. Available: https://doi.org/10.1051/matecconf/20130601001.10.1051/matecconf/20130601001 ↗
37. On the French and other methods of constructing iron floors
38. R. Jansson and L. Boström, Fire spalling of concrete—A re-assessment of test data, in Proceedings of the 8th international conference on structures in fire—SiF, 2014, pp. 297–304.
39. J. McCormack and A. Postma, "Experimental and theoretical studies on water and gas release from heated concrete," Proceedings of the Third Post-Accident Heat Removal" Information Exchange," ANL-78–10, p. 205, 1977.
40. Test method for spalling of fire exposed concrete10.1016/j.firesaf.2005.04.001 ↗
41. Experimental evidence of a moisture clog effect in cement-based materials under temperature10.1016/j.cemconres.2009.07.015 ↗
42. A comprehensive review of spalling and fire performance of concrete members10.56748/ejse.15199 ↗
43. I.H. Woolson, Investigation of the effect of heat upon the crushing strength and elastic properties of concrete. 1905.
44. D. Chapman and G. England, Effects of moisture migration on shrinkage, pore pressure and other concrete properties, 1977.
45. R. McNamee , "Fire Spalling Theories - Realistic and More Exotic Ones," presented at the Proceedings of the 6th International Workshop on Concrete Spalling due to Fire Exposure, Sheffield, United Kingdom, 2019.
46. Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type10.1016/j.cemconres.2018.10.021 ↗
47. M. Guerrieri and S. Fragomeni, "Spalling of normal strength concrete walls in fire," Structures in Fire - Proceedings of the Sixth International Conference, SiF'10, pp. 301–311, 01/01 2010.
48. On measuring techniques of pore pressure in concrete at elevated temperature
49. Moisture flow in concrete under steady state non-uniform temperature states: experimental observations and theoretical modelling10.1016/0029-5493(94)00937-T ↗
50. Moisture transport in heated concrete, as studied by NMR, and its consequences for fire spalling10.1016/j.cemconres.2007.03.004 ↗
51. Forensic engineering of fire-damaged structures
52. Spalling of high strength concrete in fire
53. Zur Frage der Abplazungen an bauteilen aus Beton bei Brandbeanspruchungen
54. S. Hasenjäger, "Ueber das Verhalten des Betons und Eisenbetons im Feuer und die Ausbildung von Dehnungsfugen im Eisenbetonbau, 1935.
55. Effect of moisture on the fire endurance of building elements
56. N. Khoylou, Modelling of moisture migration and spalling behaviour in non-uniformly heated concrete, 1997.
57. Ichikawa · 2000
58. Jansson · 2013
59. B. Standard, BS 476–3: fire tests on building materials and structures, Classification and method of test for external fire exposure to roofs. Londres, 2004.
60. Effect of fire on concrete and concrete structures10.1002/pse.51 ↗
61. Spalling prevention of high performance concrete at high temperatures
62. J.-C. Mindeguia, P. Pimienta, I. Hager, and H. Carré, Influence of water content on gas pore pressure in concretes at high temperature, in 2nd International RILEM Workshop on Concrete spalling due to fire exposure, 2011, pp. 113–121.
63. An experimental relationship between complete liquid saturation and violent damage in concrete submitted to high temperature10.1680/macr.2005.57.8.455 ↗
64. Concrete creep at high temperature and its interaction with fracture: recent progress
65. A new perspective on nature of fire-induced spalling in concrete10.1016/j.conbuildmat.2018.06.204 ↗
66. Water migration in one-side heated concrete: 4D in-situ CT monitoring of the moisture-clog-effect10.1007/s10921-018-0552-7 ↗
67. Fire spalling of concrete, as studied by NMR10.1016/j.cemconres.2011.09.014 ↗
68. R. Jansson and L. Boström, Fire spalling–the moisture effect," in 1st International workshop on concrete fire spalling due to fire exposure, 2009.
69. Effect of wall thickness on thermal behaviors of RC walls under fire conditions10.1007/s40069-016-0164-5 ↗
70. Discussion on the article “The fire resistance of concrete beams” by Ashton and Bate
71. D. Vořechovská, "Relation between spalling behaviour and water content of concrete," 2008.
72. Thermally-induced moisture transport in high-performance concrete studied by X-ray-CT and 1H NMR10.1016/j.conbuildmat.2019.07.065 ↗
73. C. Gallé, M. Pin, G. Ranc, and S. Rodrigues, Effect of the Heating Rate on Residual Thermo-hydro-mechanical Properties of a High-strength Concrete in the Context of Nuclear Waste Storage (H381), 2003.
74. Assessment of concrete sensitivity to fire spalling: A multi-scale experimental approach10.1016/j.conbuildmat.2019.03.332 ↗
75. R. Jansson and L. Boström, Fire spalling in concrete – The moisture effect, part II, MATEC Web of Conferences, vol. 6, p. 03003, 2013. [Online]. Available: 〈https://doi.org/10.1051/matecconf/20130603003〉.10.1051/matecconf/20130603003 ↗
76. Permeability measurement on high strength concrete without and with polypropylene fibers at elevated temperatures using a new test setup10.1016/j.cemconres.2013.06.005 ↗
77. Permeability of high-performance concrete subjected to elevated temperature (600C)10.1016/j.conbuildmat.2008.09.023 ↗
78. Performance of metakaolin concrete at elevated temperatures10.1016/S0958-9465(01)00061-0 ↗
79. Comparison of the strength and durability performance of normal-and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
80. Pore structures, permeabilities, and compressive strengths of concrete at temperatures up to 800C
81. Permeability and pore structure evolution of silicocalcareous and hematite high-strength concretes submitted to high temperatures10.1007/BF02482129 ↗
82. R.B. Jansson, L, Three experiments to validate basic functions in fire spalling models, presented at the The 4th International RILEM Workshop on Concrete Spalling due to Fire Exposure, Leipzig, Germany, October 8–9, 2015.
83. R.T. C.-M. Rilem, Methods of measuring moisture in building materials and structures: state-of-the-art report of the RILEM Technical Committee 248-MMB," 9783319742311 3319742310 3319742302 9783319742304 9783319742328 3319742329 9783030089429 3030089428, 2018. [Online]. Available: https://doi.org/10.1007/978–3-319–74231-1.10.1007/978-3-319-74231-1 ↗
84. Contribution à l′évaluation de la dégradation du béton: Thermographie infrarouge et couplage de techniques
85. Johansson · 2005
86. Gas permeability of concrete in relation to its degree of saturation10.1007/BF02480405 ↗
87. Experimental study of two-phase flow in three sandstones. II. Capillary pressure curve measurement and relative permeability pore space capillary models10.1016/S0301-9322(02)00091-5 ↗
88. Water retention and gas relative permeability of two industrial concretes10.1016/j.cemconres.2012.04.003 ↗
89. From relative gas permeability to in situ saturation measurements10.1016/j.conbuildmat.2012.11.092 ↗
90. Effect of moisture and concrete composition on the Torrent permeability measurement10.1007/BF02479545 ↗
91. Radocea · 1992
92. R.B. Mugume and T. Horiguchi, Effect of the measurement technique on the amount of maximum pore pressures measured inside concrete subjected to high temperatures," in 2nd International RILEM Workshop on Concrete Spalling due to Fire Exposure, Delft, The Netherlands, 2011, pp. 87–94.
93. L.-O. Nilsson, Hygroscopic Moisture Inconcrete-Drying, Measurements & Related Material Properties., 1980.
94. Application of TDR method for moisture profiles measurement in cellular concrete
95. Suitability of time domain reflectometry for monitoring moisture in building materials10.1177/0143624408092423 ↗
96. G.A. Scheffler, Validation of hygrothermal material modelling under consideration of the hysteresis of moisture storage, 2008.
97. MRI of mass transport in porous media: drying and sorption processes10.1016/j.pnmrs.2011.12.001 ↗
98. L. Pel, G. van der Heijden, and K. Kopinga, "Moisture transport in concrete during fire as studied by NMR," in conference; 2nd International Conference on Microstructural-related Durability of Cementitious Composites, 11–13 April 2012, Amsterdam, The Netherlands; 2012–04-11; 2012–04-13, 2012, pp. 235–242.
99. One-dimensional scanning of moisture in heated porous building materials with NMR10.1016/j.jmr.2010.11.010 ↗
100. Ground-Penetrating Radar monitoring of concrete at high temperature10.1016/j.conbuildmat.2017.06.114 ↗