Improving the technological properties of red stoneware tiles derived from Ratchaburi red clay by the addition of iron oxide
Source abstract
Abstract
Red clay from Ratchaburi province (Thailand), called Ratchaburi red clay (RRC), is normally used as a raw material for earthenware production in local industries. However, RRC is rarely used for producing red stoneware tiles due to firing temperature requirements. Present work aims to improve the properties of red stoneware tiles derived from RRC by the addition of iron oxide (Fe2O3). The samples composed of RRC, kaolin, and potassium feldspar with different contents of Fe2O3, were prepared by dry pressing method and fired at 1000–1200 °C. The water absorption and apparent porosity of samples decreased with increasing the content of Fe2O3 and firing temperature. Moreover, adding Fe2O3 up to a total content of 8.05 wt% not only enhanced the flexural strength and reduced the firing temperature but also reduced the water absorption to lower than 1.5% after firing at 1150 °C. Conversely, the flexural strength reduced when a total content of Fe2O3 up to 9.99 wt%. In addition, the evidence of excess Fe2O3 was observed in microstructure and XRD results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Effect of aluminum hydroxide addition on properties of fired refractory clay brick10.4028/www.scientific.net/KEM.766.300 ↗
2. Shippen · 2005
3. T. Wasanapiarnpong, T. Assavachai, A. Thueploy, K. Serivalsatit, D. Arayaphong, Firing temperature reduction for pottery by sodium carbonate addition, in: Proceedings of the 33rd Congress on Science and Technology of Thailand, 2007, pp. 1–3.
4. The microstructure and properties of ceramic tiles from solid wastes of Bayer red muds10.1016/j.conbuildmat.2019.03.280 ↗
5. Effects of CaO and Fe2O3 on the microstructure and mechanical properties of SiO2-CaO-MgO-Fe2O3 ceramics from steel slag10.2355/isijinternational.ISIJINT-2016-064 ↗
6. Novel ceramics prepared from inferior clay rich in CaO and Fe2O3: Properties, crystalline phases evolution and densification process10.1016/j.clay.2017.03.026 ↗
7. Effects of Fe2O3 on the properties of ceramics from steel slag10.1007/s12613-018-1586-7 ↗
8. Effect of hematitic iron ore and limestone additives on the thermal bloatability of bentonitic clay10.1007/s12633-017-9668-0 ↗
9. Synthesis and mechanical properties of mullite developed from beach sand sillimanite: effect of Fe20310.1080/0371750X.1998.10804854 ↗
10. Porcelain stoneware obtained from the residual muds of serpentinite raw materials10.1016/j.jeurceramsoc.2006.07.023 ↗
11. Densification behaviour of a red firing Brazilian kaolinitic clay10.1016/j.ceramint.2004.08.010 ↗
12. Ceramic porcelain stoneware production with Spanish clays purified by means of the removal of iron compounds and organic matter using physical methods10.1016/j.clay.2017.03.024 ↗
13. Development of ceramic porcelain stoneware pastes by the revalorization of Colombian clays subjected to bleaching process10.1016/j.clay.2019.105128 ↗
14. Effect of talc on microstructure and properties of the graphite tailing stoneware tiles10.1016/j.conbuildmat.2021.125314 ↗
15. Utilization of water treatment plant sludge in structural ceramics bricks10.1016/j.clay.2015.09.012 ↗
16. Effect of firing temperature on sintering of porcelain stoneware tiles10.1016/j.ceramint.2007.06.006 ↗
17. Untreated coffee husk ashes used as flux in ceramic tiles10.1016/j.clay.2013.03.009 ↗
18. The use of nepheline-syenite in a body mix for porcelain stoneware tiles10.1016/j.ceramint.2004.05.006 ↗
19. Fired porcelain microstructures revisited10.1111/j.1151-2916.1999.tb02282.x ↗
20. Microstructural evolution of mullite during the sintering of kaolin powder compacts10.1016/S0272-8842(00)00009-2 ↗
21. Role of impurities on formation of mullite from kaolinite and Al2O3–SiO2 mixtures
22. Relation between the microstructure and technological properties of porcelain stoneware. A review10.3989/mc.2015.05915 ↗
23. Mullite development on firing in porcelain stoneware bodies10.1016/j.jeurceramsoc.2010.01.002 ↗