Experimental study on the drying shrinkage mitigation technique for cement-based materials in plateau: Low-heat cement and shrinkage-reducing admixture
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (75)
Show source-provided references
1. Effects of intense ultraviolet irradiation on drying shrinkage and microstructural characteristics of cement mortar10.1016/j.conbuildmat.2022.128513 ↗
2. Cracks and crack control in concrete structures10.15554/pcij.07011988.124.145 ↗
3. Permeability study of cracked concrete10.1016/S0008-8846(97)00031-8 ↗
4. Effect of low air pressure on the durability of concrete10.1016/j.conbuildmat.2018.07.179 ↗
5. Drying shrinkage behavior of cement mortar under low vacuum conditions10.1016/j.conbuildmat.2023.130933 ↗
6. The volume stability of cement-based materials under different extreme environments in the plateau: experimental evolution
7. Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cycles10.1016/j.conbuildmat.2020.118374 ↗
8. Internal relative humidity and drying shrinkage of hardening concrete containing lightweight and normal-weight coarse aggregates: a comparative experimental study and modeling10.1016/j.conbuildmat.2017.05.057 ↗
9. Internal relative humidity and drying stress gradients in concrete10.1617/s11527-006-9090-3 ↗
10. The relative humidity dependence of the permeability of cement paste measured using GARField NMR profiling10.1016/j.cemconres.2013.12.010 ↗
11. Effect of heat curing treatment on the drying shrinkage behavior and microstructure characteristics of mortar incorporating different content ground granulated blast-furnace slag10.1016/j.conbuildmat.2018.07.079 ↗
12. Basic creep, drying creep and shrinkage of a mature cement paste after a heat cycle10.1016/0008-8846(77)90121-1 ↗
13. Effect of accelerated ageing by cyclic variations of temperature and humidity on shrinkage of concretes10.1016/j.matpr.2020.06.484 ↗
14. Study on effects of solar radiation and rain on shrinkage, shrinkage cracking and creep of concrete10.1016/j.cemconres.2011.03.003 ↗
15. Effect of different wind speeds and sealed curing time on early-age shrinkage of cement paste10.1016/j.conbuildmat.2020.119366 ↗
16. Test and simulation of concrete surface factor under different wind speeds10.1016/j.conbuildmat.2021.124019 ↗
17. NMR observation of water transfer between a cement paste and a porous medium10.1016/j.cemconres.2017.02.027 ↗
18. A poromechanics model for plastic shrinkage of fresh cementitious materials10.1016/j.cemconres.2018.04.013 ↗
19. On the mechanism of plastic shrinkage cracking in fresh cementitious materials10.1016/j.cemconres.2018.10.015 ↗
20. A critical review on drying shrinkage mitigation strategies in cement-based materials
21. Plastic shrinkage cracking of concrete incorporating mineral admixtures and its mitigation10.1617/s11527-018-1173-4 ↗
22. Application of shrinkage reducing admixture in concrete: a review10.1016/j.conbuildmat.2018.12.209 ↗
23. Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture10.1016/j.conbuildmat.2015.05.103 ↗
24. Influence of Shrinkage-reducing admixtures on early-age properties of cement pastes10.3151/jact.4.423 ↗
25. Early age stability of concrete pavement by using hybrid fiber together with MgO expansion agent in high altitude locality10.1016/j.conbuildmat.2013.07.089 ↗
26. Early-age deformation of cement emulsified asphalt mortar with aluminum powder and expansive agent10.1016/j.conbuildmat.2020.120484 ↗
27. Relationship between buck electrical resistivity and drying shrinkage in cement paste containing expansive agent and mineral admixtures
28. Shrinkage properties and microstructure of high volume ultrafine phosphorous slag blended cement mortars with superabsorbent polymer
29. Research on drying shrinkage deformation and cracking risk of pavement concrete internally cured by SAPs10.1016/j.conbuildmat.2019.116705 ↗
30. Effect of boron waste and boric acid addition on the production of low energy belite cement10.1016/j.cemconcomp.2015.12.009 ↗
31. Trends and developments in low-heat portland cement and concrete: a review10.1016/j.conbuildmat.2023.131535 ↗
32. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
33. Environmental evaluation, hydration, pore structure, volume deformation and abrasion resistance of low heat portland (LHP) cement-based materials10.1016/j.jclepro.2018.08.281 ↗
34. Influence of intense ultraviolet radiation on drying shrinkage of cement paste and its mechanism
35. Five year drying of high performance concretes: effect of temperature and cement-type on shrinkage10.1016/j.cemconres.2017.04.017 ↗
36. Research on the application of passive solar heating technology in new buildings in the Western sichuan plateau10.1016/j.egyr.2021.09.182 ↗
37. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
38. K. AligizakiPore Structure of Cement-Based Materials: Testing, Interpretation and Requirements, 2006.10.1201/9781482271959 ↗
39. Understanding the impact of synthesis parameters on the pore structure properties of Fly ash-based geopolymers10.1016/j.conbuildmat.2023.134640 ↗
40. Fractal characteristics of pore structure of hybrid Basalt–Polypropylene fibre-reinforced concrete10.1016/j.cemconcomp.2020.103555 ↗
41. Influence of Fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars10.1016/j.conbuildmat.2017.05.067 ↗
42. The internal temperature field of shotcrete in high geothermal tunnel and its effect on microstructures and mechanical properties10.1016/j.conbuildmat.2022.127507 ↗
43. Hybrid effects of basalt and polyvinyl alcohol fibers on the mechanical properties and macro-microscopic analysis of low-heat portland cement concrete10.1016/j.jmrt.2023.05.220 ↗
44. Mechanical properties, long-term hydration heat, shinkage behavior and crack resistance of dam concrete designed with low heat portland (LHP) cement and fly ash10.1016/j.conbuildmat.2018.08.056 ↗
45. Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions10.1016/j.cemconcomp.2004.09.020 ↗
46. Shrinkage of plain and silica fume cement concrete under hot weather10.1016/j.cemconcomp.2007.05.006 ↗
47. Long-term drying shrinkage of mortar — influence of silica fume and size of fine aggregate10.1016/S0008-8846(00)00347-1 ↗
48. Effect of shrinkage reduing admixture on hydration and pore structure of cement-based materials, kuei suan jen hsueh pao
49. Influence of entrained air voids on pore water pressure and volume change of concrete before and during setting10.1617/s11527-006-9085-0 ↗
50. Influence of shrinkage-reducing admixtures on plastic and long-term shrinkage10.1016/j.cemconcomp.2010.10.006 ↗
51. Evaluation of shrinkage, mass changes and fracture properties of Fine-aggregate Cement-based composites during ageing10.1016/j.proeng.2017.05.349 ↗
52. Improvement mechanism of water resistance and volume stability of magnesium oxychloride cement: a comparison study on the influences of various gypsum10.1016/j.scitotenv.2022.154546 ↗
53. Multi-scale characteristics of magnesium potassium phosphate cement modified by metakaolin10.1016/j.ceramint.2022.01.112 ↗
54. Drying shrinkage mechanisms in portland cement paste10.1111/j.1151-2916.1987.tb05002.x ↗
55. Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich portland cement10.1016/j.cemconres.2016.01.001 ↗
56. High belite cements—Present status and future technological options: part I10.1016/0008-8846(96)00099-3 ↗
57. Influence of shrinkage reducing admixtures on the performance of cementitious composites: a review10.1016/j.conbuildmat.2022.126579 ↗
58. Shrinkage-reducing admixtures and early-age desiccation in cement pastes and mortars10.1016/S0008-8846(01)00519-1 ↗
59. B. Eberhardt, On the mechanisms of shrinkage reducing admixtures in self consolidating mortars and concretes, 2011.
60. Effects of novel polymer-type shrinkage-reducing admixture on early age autogenous deformation of cement pastes10.1016/j.cemconres.2017.08.007 ↗
61. The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures10.1016/j.cemconres.2010.12.004 ↗
62. Microstructural and bulk property changes in hardened cement paste during the first drying process10.1016/j.cemconres.2014.01.007 ↗
63. Simulation of low-heat portland cement permeability and thermal conductivity using thermodynamics
64. Thermodynamics-based simulations of the hydration of low-heat portland cement and the compensatory effect of magnesium oxide admixtures10.1631/jzus.A2400521 ↗
65. Effect of ground granulated blast furnace slag on hydration characteristics of ferrite-rich calcium sulfoaluminate cement in seawater10.1007/s11771-024-5794-1 ↗
66. Investigation of microstructure of C-S-H and micro-mechanics of cement pastes under NH4NO3 dissolution by 29Si MAS NMR and microhardness10.1016/j.measurement.2021.110019 ↗
67. Creep and drying shrinkage of calcium silicate pastes II. Induced microstructural and chemical changes10.1016/0008-8846(78)90081-9 ↗
68. Manual of symbols and terminology for physicochemical quantities and units
69. The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures10.1016/j.conbuildmat.2010.04.018 ↗
70. The shrinkage of alkali activated fly ash10.1016/j.cemconres.2014.10.024 ↗
71. A novel shrinkage-reducing polycarboxylate superplasticizer for cement-based materials: synthesis, performance and mechanisms10.1016/j.conbuildmat.2022.126342 ↗
72. Molecular structure of salt solutions: a new view of the interface with implications for heterogeneous atmospheric chemistry10.1021/jp012750g ↗
73. Autogenous shrinkage of alkali activated slag mortars: basic mechanisms and mitigation methods10.1016/j.cemconres.2018.04.004 ↗
74. Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes10.1016/j.conbuildmat.2019.06.084 ↗
75. Effect of steam curing regime on the mechanical properties, drying shrinkage, and microstructure of mortar in high-altitude areas with low air pressure10.1016/j.conbuildmat.2024.138975 ↗