journal article·2024-12Open access

Multi-method characterization of 50-year-old mass concrete from the nuclear power plant Unterweser in Germany: A forensic approach

Asim Rauf, Thomas Köberle, Christof Schröfl, Marko Butler, Viktor Mechtcherine

Abstract

Concrete core samples extracted from the base of the 50-year-old reactor building at the Unterweser nuclear power plant in Germany were analyzed using contemporary and complementary experimental techniques. The analysis focused on qualitative and quantitative assessments of the mineralogical composition of ingredients, mixture composition, aggregate size distribution, presence of cracks, porosity, and compressive strength. Optical microscopy revealed insignificant micro-cracking in the concrete matrix, while the presence of blast furnace slag was clearly visible. Petrographic analysis of polished and thin sections has enabled the estimation of the concrete mixture composition and the grain size characteristics of the aggregates. The aggregates consist of quartz, silt, and volcanic rock with minor amounts of fossil-bearing grains. Pore size distribution obtained from mercury intrusion porosimetry (MIP) reveals that the concrete has a relatively refined pore structure. Hydration products in the matrix, i.e., hardened paste, were analyzed using powder X-ray diffraction (p-XRD) and thermogravimetry (TGA). Furthermore, backscattered electron (BSE SEM) image analysis was conducted to quantify the original mixture composition, including cement and slag contents, and water/binder ratio. This study emphasizes strategic and practical aspects of conducting in-depth analysis on hardened concrete samples that are several decades old and may serve as a general guideline for similar inquiries in diverse concrete structures. • A 50-year-old concrete structure has been analyzed using state-of-the-art complementary techniques. • Petrographic analysis techniques were utilized to characterize aggregates, assess mixture composition, and evaluate cracks. • MIP and CT scans were employed to assess voids within the material’s structure. • The mineralogical composition was determined through a combination of XRD and TGA.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geophysical Methods and Applications · Nuclear Physics and Applications · Nuclear and radioactivity studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. C. Schröfl et al., “Assessment of in-fact contaminated concrete inside nuclear power plants to reduce waste amounts after decommissioning,” in Nuclear Waste Management 2023, Phoenix, Feb. 2023. Accessed: Oct. 20, 2023. [Online]. Available: 〈https://www.xcdsystem.com/wmsym/2023/Oralsession.cfm?SessNo=156&SessID=4198〉.
2. P.F. Peterson, H. Zhao, and R. Petroski, “Metal And Concrete Inputs For Several Nuclear Power Plants,” 2005. Accessed: Jan. 26, 2023. [Online]. Available: 〈https://fhr.nuc.berkeley.edu/wp-content/uploads/2014/10/05-001-A_Material_input.pdf〉.
3. Targeted separation of radionuclides from contaminated concrete waste generated from decommissioning of nuclear power plants10.1007/s10967-021-07868-9 ↗
4. British Standards, BS 1881-124:2015 +A1:2021 Testing concrete-Methods for analysis of hardened concrete. 2021, pp. 1–124.
5. ASTM C1084, “Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement,” Astm, no. March 1997, pp. 315–319, 2015, doi: 10.1520/C1084-19.10.1520/C1084-19 ↗
6. W.L. Frederick, “Determination of cement content of hardened slag concrete,” Jan. 1970.
7. A chemical analysis method for determining blast-furnace slag content in hardened concrete10.1016/j.conbuildmat.2008.02.003 ↗
8. Selective dissolution of hydrated blast furnace slag cements10.1016/0008-8846(87)90110-4 ↗
9. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions10.1016/S0008-8846(01)00587-7 ↗
10. “A Combined 29 Si MAS NMR and selective dissolution technique for the quantitative evaluation of hydrated blast furnace slag cement blends10.1111/j.1551-2916.2006.01431.x ↗
11. Methods for determination of degree of reaction of slag in blended cement pastes10.1016/j.cemconres.2011.11.010 ↗
12. British Standards Institute, BS 1881-211:2016 Testing concrete - Procedure and terminology for the petrographic examination of hardened concrete. 2016.
13. ASTM Standards · ASTM C856-20: Stand. Pract. Petrogr. Exam. Hardened Concr. · 2020 · vol. 04 · 1
14. The quantitative evaluation of the water/cement ratio using fluorescence microscopy10.1680/macr.1990.42.150.45 ↗
15. NordTest, “NT Build 361: Concrete, Hardened: Water-Cement Ratio,” NORDTEST Method, pp. 1–5, 1999, Accessed: Jan. 12, 2023. [Online]. Available: 〈http://www.nordtest.info/wp/1999/11/22/concrete-hardened-water-cement-ratio-nt-build-361-edition-2/〉.
16. “Determination of Blast-Furnace Slag Content in Hardened Concrete by Electrical Conductivity Methods,”10.1520/CCA10341J ↗
17. W.L. Dolch, “Analysis of Hardened Concrete for Admixture Content,” 1980. [Online]. Available: 〈https://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=2333&context=jtrp〉.10.5703/1288284314012 ↗
18. Determination of Mix Composition of Concrete Containing Fly Ash Using Gamma Spectrometry10.1557/opl.2012.1551 ↗
19. Internal chemical evolution of the constitution of blended cements10.1016/0008-8846(88)90042-7 ↗
20. Analytical study of pure and extended Portland cement pastes: I, Pure Portland cement pastes10.1111/j.1151-2916.1985.tb10124.x ↗
21. How closely can we determine the water-cement ratio of hardened concrete?10.1007/BF02480870 ↗
22. Microscopy techniques for determining water–cement (w/c) ratio in hardened concrete: a round-robin assessment10.1617/s11527-020-1458-2 ↗
23. Poole · 2016
24. Determination of water–cement ratio of hardened concrete by scanning electron microscopy10.1016/j.cemconcomp.2004.02.032 ↗
25. Determination of slag and fly ash content in hardened concrete10.1520/CCA10337J ↗
26. Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure10.1016/j.cemconres.2004.01.014 ↗
27. H.S. Wong and N. Buenfeld, “Estimating the water / cement ( w / c) ratio from the phase composition of hardened cement paste,” 11th EMABM, Euroseminar on Microscopy Applied to Building Materials, no. June, 2007.
28. ASTM Standards, ASTM C1356: Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure. 2020.
29. Determining the water–cement ratio, cement content, water content and degree of hydration of hardened cement paste: method development and validation on paste samples10.1016/j.cemconres.2009.06.013 ↗
30. Estimating the original cement content and water–cement ratio of Portland cement concrete and mortar using backscattered electron microscopy10.1680/macr.12.00201 ↗
31. Determining the slag fraction, water/binder ratio and degree of hydration in hardened cement pastes10.1016/j.cemconres.2013.12.002 ↗
32. Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: application to aggregates used in concrete10.1016/S0008-8846(02)00836-0 ↗
33. Estimation of air void and aggregate spatial distributions in concrete under uniaxial compression using computer tomography scanning10.1016/j.cemconres.2004.08.016 ↗
34. Shape and size of microfine aggregates: X-ray microcomputed tomography vs. laser diffraction10.1016/j.powtec.2007.02.016 ↗
35. Three dimensional digital sieving of asphalt mixture based on x-ray computed tomography10.3390/app7070734 ↗
36. Investigation of concrete workability through characterization of aggregate gradation in hardened concrete using X-ray computed tomography10.1016/j.cemconcomp.2019.02.008 ↗
37. A review of X-ray computed tomography of concrete and asphalt construction materials10.1016/j.conbuildmat.2018.12.049 ↗
38. Concrete drill core characterization finalized to optimal dismantling and aggregates recovery10.1016/j.wasman.2016.10.008 ↗
39. Fatmawati Abdul Wahid · 2016
40. Analysis of cement paste and aggregate content of concrete using micro X-ray fluorescence10.1680/jmacr.21.00094 ↗
41. Investigation of concrete by means of micro-XRF10.1017/S1431927621011004 ↗
42. Image analysis method for determining 3-D size distribution of coarse aggregates10.1007/s10064-004-0251-8 ↗
43. 2D image analysis method for evaluating coarse aggregate characteristic and distribution in concrete10.1016/j.conbuildmat.2016.09.120 ↗
44. Particle size distribution analysis of coarse aggregate using digital image processing10.1016/S0008-8846(98)00043-X ↗
45. Image analysis techniques on evaluation of particle size distribution of gravel
46. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
47. Automated crack identification for cement paste10.1016/0008-8846(95)00049-I ↗
48. Quantitative backscattered electron analysis of cement paste10.1016/0008-8846(92)90022-N ↗
49. A new image analysis technique for the quantitative assessment of microcracks in cement-based materials10.1016/S0008-8846(99)00212-4 ↗
50. Microscopic observation of cracks in concrete — A new sample preparation technique using dye impregnation10.1016/0008-8846(96)00032-4 ↗
51. Identification and quantification of cracks in concrete by optical fluorescent microscopy10.1016/j.cemconres.2006.05.011 ↗
52. Specimen preparation and image processing and analysis techniques for automated quantification of concrete microcracks and voids10.1016/S0008-8846(03)00219-9 ↗
53. Fluorescent thin sections to observe the fracture zone in mortar10.1016/0008-8846(84)90051-6 ↗
54. Fracture analysis of concrete using scanning electron microscopy10.1002/sca.4950190605 ↗
55. Image analysis for the automated study of microcracks in concrete10.1016/S0958-9465(00)00054-8 ↗
56. About the analysis of microcracking in concrete10.1016/S0958-9465(00)00056-1 ↗
57. Application of UV Image Analysis for Evaluation of thermal Cracking in Concrete
58. Detection and quantification of cracking in concrete aggregate through virtual data fusion of x-ray computed tomography images10.3390/ma13183921 ↗
59. Some factors influencing air permeation measurements in cover concrete10.1007/BF02472013 ↗
60. Cracking and permeability of concrete under tension10.1007/BF02486159 ↗
61. Effect of Cracking on Water and Chloride Permeability of Concrete10.1061/(ASCE)0899-1561(1999)11:3(181) ↗
62. Crack effects on gas and water permeability of concretes10.1016/j.cemconres.2009.03.009 ↗
63. Permeability study of cracked concrete10.1016/S0008-8846(97)00031-8 ↗
64. Permeability of cracked concrete10.1007/BF02479629 ↗
65. Determination of pore-size distribution from freezing-point depression10.1007/BF02479036 ↗
66. The use of nitrogen adsorption for the characterisation of porous materials10.1016/S0927-7757(01)00612-4 ↗
67. Physisorption of nitrogen by porous materials10.1007/BF00486564 ↗
68. A critical comparison of mercury porosimetry and capillary condensation pore size distributions of portland cement pastes10.1016/0008-8846(71)90058-5 ↗
69. Mercury porosimetry10.1016/S0008-8846(00)00370-7 ↗
70. Porosity measurement of some hydrated cementitious systems by high pressure mercury intrusion-microstructural limitations10.1016/0008-8846(79)90073-5 ↗
71. Some aspects of evaluation of concrete through mercury intrusion porosimetry10.1016/S0008-8846(96)00192-5 ↗
72. NMR relaxometry study of cement hydration in the presence of different oxidic fine fraction materials10.1016/j.ssnmr.2003.05.003 ↗
73. A.C.A. Muller, “Characterization of porosity & C-S-H in cement pastes by 1H NMR,” 2014. Accessed: Jan. 12, 2023. [Online]. Available: 〈https://infoscience.epfl.ch/record/202011?ln=en〉.
74. Characterization of pore structures of hydrated cements and natural shales by 129 Xe NMR spectroscopy10.1016/j.micromeso.2017.06.038 ↗
75. Quantitative characterization of pore morphology in hardened cement paste via SEM-BSE image analysis10.1016/j.conbuildmat.2019.01.055 ↗
76. Quantitative Digital Petrography: Full Thin Section Quantification of Pore Space and Grains
77. The use of backscattered electron microscopy and image analysis to study the porosity of cement paste10.1557/PROC-137-129 ↗
78. Image analysis techniques for characterization of pore structure of cement-based materials10.1016/0008-8846(94)90004-3 ↗
79. A Method to measure pore size distribution of porous materials using scanning electron microscopy images10.1063/1.3515554 ↗
80. Quantifying the distribution of paste-void spacing of hardened cement paste using X-ray computed tomography10.1016/j.matchar.2012.08.008 ↗
81. Measurement of entrained air-void parameters in Portland cement concrete using micro X-ray computed tomography10.1080/10298436.2016.1172705 ↗
82. X-ray microtomography (μ-CT) to analyze the pore structure of a Portland cement composite based on the selection of different regions of interest10.1016/j.conbuildmat.2015.07.128 ↗
83. Measurement of air void system in lightweight concrete by X-ray computed tomography10.1016/j.conbuildmat.2017.06.180 ↗
84. Method for calculating the porosity of cement composite materials using X-ray computed tomography10.1088/1757-899X/1030/1/012092 ↗
85. Measurement of porosity in blended cement pastes10.1016/0008-8846(88)90122-6 ↗
86. Pore structure of cement pastes through NAD and MIP analysis10.1680/adcr.14.00109 ↗
87. Pore Size Distributions in Hardened Cement Paste by Sem Image Analysis10.1557/PROC-370-217 ↗
88. Pore structure characterization of hardened cement paste by multiple methods10.1155/2019/2915684 ↗
89. Pore size and shape in mortar by thermoporometry10.1016/j.cemconres.2009.11.011 ↗
90. Damage to the pore structure of hardened Portland cement paste by mercury intrusion10.1111/j.1151-2916.1997.tb03144.x ↗
91. Ink-bottle effect in mercury intrusion porosimetry of cement-based materials10.1006/jcis.2001.7962 ↗
92. ISO, ISO 15901-1:2016 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption-Part 1: Mercury porosimetry. Accessed: Jan. 26, 2023. [Online]. Available: 〈https://www.iso.org/standard/56005.html〉.
93. ASTM Standards, ASTM C457/C457M-16 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete. 2016.
94. Quantitative phase analysis of Portland cements from reactive powder concretes by X-ray powder diffraction10.1680/adcr.1996.8.32.175 ↗
95. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods10.1016/j.cemconres.2004.04.014 ↗
96. Characterization of hydration products’ formation and strength development in cement-stabilized kaolinite using TG and XRD10.1061/(ASCE)MT.1943-5533.0002454 ↗
97. A spectroscopic NMR investigation of the calcium silicate hydrates present in cement and concrete10.1016/S0730-725X(96)00211-1 ↗
98. Impedance spectroscopy of hydrating cement-based materials: measurement, interpretation, and application10.1111/j.1151-2916.1994.tb04507.x ↗
99. Analysis of phases in cement paste using backscattered electron images, methanol adsorption and thermogravimetric analysis10.1557/PROC-85-67 ↗
100. The microstructure of cement paste and concrete––a visual primer10.1016/j.cemconcomp.2004.02.028 ↗