Engineered Nanoparticle Release from Personal Protective Clothing: Implications for Inhalation Exposure

In this study, we investigated engineered nanoparticle (ENP) release associated with the contamination of personal protective clothing during the simulated motion of the human wearing the ENP-contaminated protective clothing and evaluated the relative ENP retention on the fabric. The release of airborne ENPs can contribute to inhalation exposure, which is the route of exposure of most concern to cause adverse health effects in the pulmonary system. The evaluation focuses on four popular fabric materials making the laboratory coats (cotton, polypropylene, polyester cotton blend, and Tyvek) and three types of ENPs (Al2O3, carbon black (CB), and carbon nanotube (CNT)). The magnitudes of particle contamination and resuspension were investigated by measuring the number concentration increase of airborne particles in sizes of 10 nm to 10 μm and the weight changes on fabric pieces. Collected aerosol particles and contaminated fabric surfaces were further characterized for understanding particle morphology, elements, agglomeration, and surface contamination status. The particle resuspension from the contaminated lab coat fabric was found to vary by the type of fabric material. Cotton fabric showed the highest level of particle resuspension for all three tested ENPs. Data were evaluated to determine the dominant forces responsible for ENP adhesion on the surface of the fabric. Tyvek fabric was determined as the best fabric for trapping Al2O3 and carbon black ENPs, indicating less resuspension of particles, meaning lower subsequent release, but not durable enough to wear for the long term compared with other fabrics.