Research on the damage evolution law of iron tailing sand based foam concrete under cyclic loading
Source abstract
Abstract
In order to investigate the dynamic response of iron tailing sand based foam concrete as a roadbed filler, graded cyclic loading and unloading tests were carried out in this paper to examine its dynamic properties. The hysteresis curve, fatigue strength, loading-residual strain, energy evolution and microstructure were investigated and analyzed, taking into account the influencing factors of different iron tailing sand contents. The results show that the hysteresis curve exhibits obvious elastic-plastic characteristics, the main curve has an approximate hyperbolic shape, and the cyclic loading and unloading strengths are lower than the uniaxial compressive strength. The sensitivity of the residual strain to the stress change is lower than the loading strain. With the increase of iron tailing sand content, the number of cyclic loading-unloading experienced by the pieces showed a trend of increasing and then decreasing, and the energy dissipation capacity was improved to a certain extent.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Tailings Management and Properties · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effects of various additives on drying shrinkage, compressive and flexural strength of lightweight foamed concrete (LFC)
2. A review on durability of foam concrete10.3390/buildings13071880 ↗
3. Experimental and computational dynamic analysis of the foam concrete as a sub-base layer of the pavement structure10.1051/matecconf/201821113002 ↗
4. Greener lightweight foam concrete using seaweed industrial by-product to replace natural sand with inorganic salt as a stabilizer
5. Evaluation on the full-scale test bed performance of lightweight foamed soil using railroad loading system
6. Dynamic characteristics and response analysis of a new type of prefabricated fly ash foam concrete structure10.1016/j.istruc.2023.105074 ↗
7. Field assessment of a subgrade-culvert transition zone constructed with foamed concrete in the ballasted railway10.1080/23248378.2023.2181877 ↗
8. Experimental study on use of lightweight foam concrete as subgrade bed filler of ballastless track10.1016/j.conbuildmat.2017.04.122 ↗
9. Experimental and numerical analyses of lightweight foamed concrete as filler for widening embankment10.1016/j.conbuildmat.2020.118897 ↗
10. Foamed concrete-based material as a soft ground arresting system for runways and airfields10.1061/(ASCE)CF.1943-5509.0000692 ↗
11. Feasibility study on use of cellular concrete for air convection embankment on permafrost foundations in Fairbanks, Alaska
12. Experimental and numerical analyses of lightweight foamed concrete as filler for widening embankment10.1016/j.conbuildmat.2020.118897 ↗
13. Eco-friendly incorporation of sugarcane bagasse ash as partial replacement of sand in foam concrete
14. Performance of sustainable lightweight foam concrete prepared using palm oil fuel ash as a sand replacement
15. Industrial waste utilization for foam concrete10.1088/1757-899X/310/1/012062 ↗
16. Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate10.1016/j.conbuildmat.2019.117774 ↗
17. Research on the high-temperature resistance of recycled aggregate concrete with iron tailing sand
18. Effect of iron ore tailings as partial replacement to fine aggregate on the performance of concrete
19. Mechanical performance and reinforcing mechanisms of foamed concrete strengthened by carbon fibers
20. Sustainable use of waste glass sand and waste glass powder in alkali-activated slag foam concretes: physico-mechanical, thermal insulation and durability characteristics
21. A validation study on mechanical properties of foam concrete with coarse aggregate using ann model
22. Mechanical properties of lightweight foam concrete filler for roadbed of high-speed railway10.1007/s12517-021-07115-1 ↗
23. Experimental study on use of lightweight foam concrete as subgrade bed filler of ballastless track10.1016/j.conbuildmat.2017.04.122 ↗
24. Experimental research on the dynamic mechanical properties and damage characteristics of lightweight foamed concrete under impact loading10.1016/j.ijimpeng.2020.103558 ↗
25. Experimental investigation on the dynamic mechanical properties and energy absorption mechanism of foam concrete10.1016/j.conbuildmat.2022.127927 ↗
26. Dynamic properties of silt-based foamed concrete as filler in subgrade10.1061/(ASCE)MT.1943-5533.0004398 ↗
27. Dynamic properties of alkali residue-based foamed concrete under cyclic load
28. Compression, Unloading-reloading, and tension mechanical behaviors of Silt-based foamed concrete under uniaxial loading10.1016/j.conbuildmat.2022.128558 ↗
29. Effect of a new type of high-strength lightweight foamed concrete on seismic performance of cold-formed steel shear walls10.1016/j.conbuildmat.2018.06.067 ↗
30. Development of thermal insulating lightweight foamed concrete reinforced with polypropylene fibres10.1007/s13369-020-04382-0 ↗
31. The possibility of producing self-compacting lightweight concrete by using expanded polystyrene beads as coarse aggregate
32. Influence of filler type on the properties of foam concrete10.1016/j.cemconcomp.2005.12.001 ↗
33. Fresh state characteristics of foam concrete10.1061/(ASCE)0899-1561(2008)20:2(111) ↗
34. Evaluation of iron ore tailings as replacement for fine aggregate in concrete10.1016/j.conbuildmat.2016.05.095 ↗
35. Characterization of cyclic loading/unloading damage behavior in fiber-reinforced ceramic-matrix composites using inverse tangent modulus10.1016/j.jeurceramsoc.2021.12.060 ↗
36. Oxidative phosphorylation does not violate the second law of thermodynamics10.1021/acs.jpcb.4c03047 ↗