journal article·2025-07Open access

Study on the effect of sintered secondary aluminum ash prepared pottery sand on the mechanical properties and ecological performance of high-strength cement-based materials

Jianming He, Luxin Ji, Hongrui Ma, Mingfang Ba, Lei Wang

Abstract

To reutilize secondary aluminum ash and heavy metal sludge, this study investigates the impact of pottery sand content and its pre-wetting state, making by sintering all of the solid waste mentioned above, on the workability, mechanical properties, and leaching content of harmful substances in high-strength concrete, combing Micro-CT, XRD, DTG, FTIR, and SEM to analyze its mechanism. The results show that the incorporation of pottery sand in the high-strength concrete matrix accelerates the cement hydration process and enhances its early strength. The pre-wetted pottery sand with a content of 10 % and the drying pottery sand with a content of 30 % exhibit superior performance, with 3-day compressive strengths increasing by 15.95 % and 14.18 %, respectively, compared to the group without pottery sand. As the content of pottery sand increases, the compressive strength of the specimens first increases and then decreases. When the content is below 20 %, the pre-wetted pottery sand group demonstrates better strength than the drying pottery sand group, the effect is more remarkable while pottery content is beyond 20 %. At the same time, the pre-wetting manner significantly limits the migration and penetration of harmful ions. Microanalysis reveals that the active silicate and aluminate element in the pottery sand consume Ca(OH) 2 from the hydration products, generating more calcium silicate hydrate (C-S-H) gel, which refines the pore structure, making it more compact. The maximum pore volume for the reference group, pottery sand group, and pre-wetted pottery sand group were 4.76 mm³ , 2.87 mm³ , and 2.65 mm³ , respectively. • A comprehensive study on the impact of pottery sand on mechanical properties. • An in-depth exploration of the mechanism by which pottery sand affects high-strength cement-based materials. • A systematic evaluation of the environmental risks associated with the use of pottery sand.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Utilizing iron ore tailing as cementitious material for eco-friendly design of ultra-high performance concrete (UHPC)10.3390/ma14081829 ↗
2. M. Afifi. Internal Curing of High Performance Concrete Using Lightweight and Recycled Aggregates, 2016.
3. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗
4. Experimental and theoretical studies on autogenous shrinkage of concrete at early ages10.1061/(ASCE)MT.1943-5533.0000171 ↗
5. Influence of internal curing on the pore size distribution of high strength concrete10.1016/j.conbuildmat.2018.10.130 ↗
6. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems
7. Effect of prewetting degree of ceramsite on the early-age autogenous shrinkage of lightweight aggregate concrete10.1016/j.conbuildmat.2015.08.102 ↗
8. An overview on the effect of internal curing on shrinkage of high performance cement-based materials10.1016/j.conbuildmat.2017.04.154 ↗
9. Techniques and materials for internal water curing of concrete10.1617/s11527-006-9136-6 ↗
10. Absorption-desorption process of internal curing water in ultra-high performance concrete (UHPC) incorporating pumice: from relaxation theory to dynamic migration model10.1016/j.cemconcomp.2022.104659 ↗
11. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
12. Mitigating autogenous shrinkage by internal curing. High performance structural lightweight concrete
13. Effect of curing conditions on the strength and durability of air entrained concrete with and without fly ash
14. Investigating the unique entropy-elasticity of polymer modified asphalt
15. A state-of-the-art review of crushed urban waste glass used in OPC and AAMs (geopolymer): progress and challenges
16. The utilization of waste plastics in asphalt pavements: a review
17. Harmless treatment and recycling of secondary aluminum dross: a review
18. Removal of chlorophenols from wastewater using red mud: an aluminum industry waste10.1021/es049539d ↗
19. Synthesis of various layered double hydroxides using aluminum dross generated in aluminum recycling process10.1016/j.minpro.2012.03.011 ↗
20. Theoretical and experimental on the thermodynamic, kinetic and phase evolution characteristics of secondary aluminum ash10.1016/j.jmrt.2022.06.105 ↗
21. Recovery of valuable products from hazardous aluminum dross: a review10.1016/j.resconrec.2017.11.026 ↗
22. A thermodynamic and kinetic study of catalyzed hydrolysis of aluminum nitride in secondary aluminum dross10.1016/j.jmrt.2020.06.051 ↗
23. A novel approach for preparing glass ceramic foams from MSWI fly ash: foaming characteristics and hierarchical pore formation mechanism10.1016/j.jmrt.2022.02.090 ↗
24. Solidification/stabilization pre-treatment coupled with landfill disposal of heavy metals in MSWI fly ash in China: a systematic review10.1016/j.jhazmat.2024.135479 ↗
25. Physical and mechanical properties of aluminum dross10.11648/j.am.20140302.11 ↗
26. Hazardous aluminum dross characterization and recycling strategies: a critical review10.1016/j.jenvman.2018.06.068 ↗
27. Recovery of alumina from secondary aluminum dross by alkali leaching
28. European Commission. Directive 2008/98/EC on waste. Off. J. Eur. Union. 2008; L312/3.
29. Recovery of valuable products from hazardous aluminum dross: a review10.1016/j.resconrec.2017.11.026 ↗
30. Exergoeconomic and exergoenvironmental analyses of a promising alumina extraction process from secondary aluminum dross in China
31. Pore structure of lightweight clay aggregate incorporate with non-metallic products coming from aluminium scrap recycling industry
32. Microstructure observation of β-sialon-15Rpotterys synthesized from aluminum dross
33. Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slags10.1016/S0008-8846(00)00272-6 ↗
34. Eco-concrete for sustainability: utilizing aluminium dross and iron slag as partial replacement materials10.1007/s10098-017-1419-9 ↗
35. The role of Pozzolanic activity of siliceous fly ash in the formation of the structure of sustainable cementitious composites10.3390/suschem3040032 ↗
36. Characteristics of carbide-slag-activated GGBS–fly ash materials: strength, hydration mechanism, microstructure, and sustainability10.1016/j.conbuildmat.2024.135796 ↗