Research on the influence of major ions in weakly alkaline mine water on anchor cable corrosion and protection technique
Source abstract
Abstract
Anchor cables in water-rich roadways frequently experience severe corrosion and resultant fractures due to the combined effects of mine water and high stress. However, the precise factors influencing corrosion on these cables remain ambiguous, presenting challenges to roadway support safety. This study investigated the impact of major ions present in weakly alkaline mine water on anchor cable corrosion using salt spray corrosion experiments. The results indicated that major anions such as Cl- notably influence anchor cable corrosion, which primarily manifested as pitting corrosion. The nominal yield strength decreased by 95.68–156.01 MPa, and the nominal tensile strength decreased by 133.44–202.77 MPa because of a decrease in the cross-sectional area. During the corrosion process, major anions such as Cl- continuously degraded the passivation film on the surface of the anchor cable, exposing its internal metal structure and exacerbating corrosion until eventual fracture failure occurred. Therefore, this paper proposes a corrosion protection technique for mine anchor cables to realize superior protective effects compared to conventional anchor cables used concurrently in field applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Seventy years development and prospects of strata control technologies for coal mine roadways in China
2. study of influence of erosion on mechanical behavior of anchor
3. Model tests for time-dependent evolutionary behavior of anchored beddingslope in corrosion environment
4. Research on safety and durability of bolt and cable-supported structures
5. Service life prediction of prestressed anchor cable exposed to a dry-wet cycling corrosion environment10.1016/j.conbuildmat.2023.133365 ↗
6. Research progress on corrosion durability of anchorage structures in underground engineering
7. Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack10.1016/j.conbuildmat.2014.08.063 ↗
8. Experiment on the influence of mine water on anchor cable corrosion in Shendong mining area
9. Microbiologically influenced stress corrosion cracking responsible for catastrophic failure of cable bolts10.1016/j.engfailanal.2021.105884 ↗
10. Microbiologically influenced corrosion of cable bolts in underground coal mines: the effect of Acidithiobacillus ferrooxidans10.1016/j.ijmst.2021.01.006 ↗
11. Corrosion evaluation for existing ground anchored structure
12. Performance evolution of prestressing anchor bars in corrosive environments experimental study10.1038/s41598-023-35577-8 ↗
13. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires10.1016/j.corsci.2017.12.014 ↗
14. Stress corrosion cracking of rockbolts:an in-situ testing approach10.1016/j.conbuildmat.2020.121275 ↗
15. Stress corrosion cracking behaviour of 7xxx aluminum alloys: a literature review10.1016/S1003-6326(16)64220-6 ↗
16. Laboratory-based investigation into stress corrosion cracking of cable bolts10.3390/ma12132146 ↗
17. Experimental study on degradation behaviors of rock bolt under the coupled effect of stress and corrosion10.1016/j.conbuildmat.2019.03.335 ↗
18. Experimental study on degradation behavior of anchor cables due to sulfate corrosion
19. Investigation of cable bolts for stress corrosion cracking failure10.1016/j.conbuildmat.2018.08.066 ↗
20. Sasai Wu, Haotian Zhu, Wen Zhang, et al. Synergic Influence of Mine Multi-attribute Environments on Rock Bolts Corrosion. Metal Mine 2020;(05):132–136. 10.19614/j.cnki.jsks.202005019.
21. Investigation into risk assessment of bolt corrosion failure in deep mines
22. Research progress on corrosion and anti-corrosion technology of ribbed steel
23. Study on preparation and anti-corrosion performance of polyaniline based composite coating on stainless steel
24. Effect of soaking corrosion on flexural properties of foam aluminum-epoxy composites
25. Xiaohua Zhang, Sirong Yu, Yan Liu, et al. Research Progress of Formation Mechanism and Influencing Factors of Sherardizing Coating on Steel. Surface Technology 2020;49(11):141–150. 10.16490/j.cnki.issn.1001-3660.2020.11.015.
26. Development and evaluation of corrosion resistant coating for expandable rock bolt against highly corrosive ground conditions10.1016/j.ijmst.2017.12.023 ↗
27. Laboratory and field testing of bolting systems subjected to highly corrosive environments10.1016/j.ijmst.2016.11.017 ↗
28. Water qualityand health risk of surface water,groundwater and mine water in shendong mining area
29. characteristics and formation mechanism of fluoride in typical mine water in Shendong Mining Area
30. HJ 493 · 2009
31. HJ 494 · 2009
32. GB-T 19923-2005. The reuse of urban recycling water—Water quality standard for industrial uses. Standards Press of China, Beijing, China.
33. JB-T 6074-1992. Preparation, cleaning and evaluation of corrosion test specimens. Standards Press of China, Beijing, China.
34. Variability in cross-sectional areas and tensile properties of corroded prestressing wires10.1016/j.conbuildmat.2019.116830 ↗
35. Kuanghui · 2010
36. Mechanical Performance of Corroded Unbonded Prestressed Steel Stranded Wires
37. GB-T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature. Standards Press of China, Beijing, China.
38. Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures10.1016/j.conbuildmat.2013.10.042 ↗
39. Potential pitfalls in assessing chloride-induced corrosion of steel in concrete10.1016/j.cemconres.2009.01.015 ↗
40. Structural performance of RC beams damaged by natural corrosion under sustained loading in a chloride environment10.1016/j.engstruct.2015.04.001 ↗
41. Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack10.1016/j.conbuildmat.2014.08.063 ↗
42. Influence of chloride corrosion on tension capacity of rebars10.1007/s11771-021-4834-3 ↗
43. Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels10.1016/j.corsci.2020.109150 ↗
44. Influence of cementite coarsening on the corrosion resistance of high strength low alloy steel10.1038/s41529-023-00358-1 ↗
45. Investigation of Cr and rare earth (RE) on the corrosion resistance of HRB400 rebar in simulated concrete pore solutions containing chloride and sulfate ions10.1016/j.conbuildmat.2024.135935 ↗
46. Effect of inclusions modified by rare earth elements (Ce, La) on localized marine corrosion in Q460NH weathering steel10.1016/j.corsci.2017.10.001 ↗
47. Focusing on the corrosion resistance enhancement of HRB400 rebar by Cr addition in the marine environment