Titanium Trisulfide Nanosheets and Nanoribbons for Field Emission-Based Nanodevices

The field emission (FE) properties of TiS 3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of ∼0.3 V/μm, required for drawing an emission current density of ∼10 μA/cm 2 . Interestingly, the TiS 3 nanosheet emitter delivered a large emission current density of ∼0.9 mA/cm 2 at a relatively low applied electric field of ∼0.4 V/μm. We have estimated the values of the field enhancement factor (β), which are found to be ∼5 × 10 4 for the TiS 3 nanosheet emitter and ∼4 × 10 3 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS 3, as reflected in the high value of β. In fact, the nanosheet sample presents a higher density of ultrathin layers (∼12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are ∼19 nm-thick). The superior FE behavior of TiS 3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS 3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.