The role of water in tailoring thermoelectric PEDOT:PSS films
Source abstract
Abstract
The conductive polymer polyethylenedioxythiophene doped with polystyrene sulfonate (PEDOT:PSS) is one of the most studied organic thermoelectric materials thanks to its low cost, high electrical conductivity, and biocompatibility. There are conflicting explanations for the changed morphology and the phase segregation of PEDOT and PSS that leads to improved TE performance through alleviating the trade-off between electrical conductivity and Seebeck coefficient (thermoelectric voltage in response to temperature difference). In the study, we demonstrated the TE properties of PEDOT:PSS films were improved by a simple process of sequential hydrothermal annealing and soaking in water, resulting in a simultaneous increase in both electrical conductivity (σ)and Seebeck coefficient (S). The optimized conductivity σ and Seebeck coefficient were ∼1100 S cm −1 and ∼25 μV K -1 , respectively, corresponding to a power factor (PF) of ∼70 μW m -1 K - 2 . Hydrothermal annealing led to a conformational change from a core-shell structure to inter-bridging PEDOT-rich fibres. Soaking minimised the hydrophilic dopant PSS volume that inhibits charge transport. This two-step treatment changed the PEDOT:PSS thin films from hygroscopic to hydrophobic, and increased charge carrier mobility by the removal of PSS-rich regions, phase separation, and conformational and morphological change. The mechanism behind this improved Seebeck coefficient is attributed to a more ordered structure and increased mobility due to physical dedoping, rather than a change in carrier concentration or doping level. This protocol permits tailoring of thermoelectric performance and charge transport employing a more biocompatible treatment that is suitable for mass-production of biocompatible, low-cost biosensors and large-area thermoelectric power generators. • Water-only treatment boosts PEDOT:PSS TE performance • Conductivity and Seebeck increase together to yield a power factor ≈ 70 μW m -1 K -2 • Water selectively removes neutral PSSH, producing interconnected PEDOT-rich nanofibers • Scalable, biocompatible route for flexible thermoelectrics, wearable power and sensors
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. High-reliability thermoreceptors with minimal temporal and spatial variations through photo-induced patterning thermoelectrics10.1007/s40820-025-01821-1 ↗
2. High spatiotemporal resolution biomimetic thermoreceptors realizing by jointless p-n integration thermoelectric composites10.1002/adfm.202411490 ↗
3. Thermoelectric materials and applications in buildings10.1016/j.pmatsci.2024.101402 ↗
4. Thermoelectric energy harvesting and safety protection for buildings10.1016/j.scib.2025.04.004 ↗
5. Development of ionic liquid-based electroactive polymer composites using nanotechnology10.1515/ntrev-2021-0009 ↗
6. Preparation and characterization of transparent polymeric electrolyte containing ionic liquid with long alkyl chains for electroactive polymers10.1039/D2TC04685G ↗
7. PEDOT:PSS-based bioelectronics for brain monitoring and modulation10.1038/s41378-025-00948-w ↗
8. Harness high-temperature thermal energy via elastic thermoelectric aerogels10.1007/s40820-024-01370-z ↗
9. Robust, efficient, and recoverable thermocells with zwitterion-boosted hydrogel electrolytes for energy-autonomous and wearable sensing10.1002/anie.202405357 ↗
10. Characterization of PEDOT:PSS as a biocompatible conductive material
11. Realizing a 10 °C cooling effect in a flexible thermoelectric cooler using a Vortex generator10.1002/adma.202204508 ↗
12. Biocompatible, flexible and conductive polymers prepared by biomass-derived ionic liquid treatment10.1039/D1PY00064K ↗
13. Metal-like conductivity in acid-treated PEDOT:PSS films: surpassing 15,000 S/Cm10.1021/acsami.4c19958 ↗
14. Solving the interdependence between electrical conductivity and seebeck coefficient: a case study of PEDOT:PSS10.1002/asia.202401854 ↗
15. Green biocomposites for thermoelectric wearable applications
16. Mechanisms for doped PEDOT:PSS electrical conductivity improvement10.1039/D1MA00290B ↗
17. Biocompatible and biodegradable organic transistors using a solid-state electrolyte incorporated with choline-based ionic liquid and polysaccharide
18. Effect of water-soluble vitamins on the structure and properties of poly(3,4-ethylenedioxythiopehene):poly(styrenesulfonate)10.1016/j.orgel.2017.03.006 ↗
19. PEDOT:PSS interfaces stabilised using a PEGylated crosslinker yield improved conductivity and biocompatibility10.1039/C9TB01028A ↗
20. A novel and green method for preparing highly conductive PEDOT:PSS films for thermoelectric energy harvesting10.3390/polym16020266 ↗
21. Enhancing the conductivity of PEDOT:PSS films for biomedical applications via hydrothermal treatment10.1016/j.bios.2020.112717 ↗
22. Influence of a water rinse on the structure and properties of Poly(3,4-ethylene dioxythiophene):Poly(styrene sulfonate) films10.1021/la051403l ↗
23. A simple green route to blue thermoelectric PEDOT: PSS10.1063/5.0067723 ↗
24. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
25. Relation between secondary doping and phase separation in PEDOT:PSS films10.1016/j.apsusc.2016.05.076 ↗
26. Ultrafast laser‐induced excellent thermoelectric performance of PEDOT:PSS films
27. Rationalizing the enhancement of the thermoelectric properties of PEDOT:PSS by secondary doping10.1063/5.0054477 ↗
28. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
29. Eliminating the detrimental effect of secondary doping on PEDOT : PSS hole transporting material performance10.1002/cssc.202101458 ↗
30. Morphological modulation to improve thermoelectric performances of PEDOT:PSS films by DMSO vapor post-treatment10.1016/j.synthmet.2020.116628 ↗
31. Effects of cationic species in salts on the electrical conductivity of doped PEDOT:PSS films10.1021/acsapm.0c01084 ↗
32. Thermoelectric properties of conductive freestanding films prepared from PEDOT:PSS aqueous dispersion and ionic liquids10.1021/acsami.2c16903 ↗
33. Solution-processed PEDOT: PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids10.1021/am404113n ↗
34. Electrochemical and XPS studies toward the role of monomeric and polymeric sulfonate counterions in the synthesis, composition, and properties of Poly(3,4-ethylenedioxythiophene)10.1021/ma021715k ↗
35. PEDOT:PSS films with very high thermoelectric properties through water-swollen assisted reduction with a tetrakis(dimethylamino)ethylene solution10.1002/adfm.202410929 ↗
36. Band transport evidence in PEDOT:PSS films using broadband optical spectroscopy from terahertz to ultraviolet region10.1038/s43246-024-00451-1 ↗
37. PEDOT:PSS films with greatly enhanced conductivity via nitric acid treatment at room temperature and their application as Pt/TCO-Free counter electrodes in dye-sensitized solar cells10.1002/aelm.201500121 ↗
38. Effect of substituents in sulfoxides on the enhancement of thermoelectric properties of PEDOT:PSS: experimental and modelling evidence10.1039/D0ME00032A ↗
39. Enhanced thermoelectric performance of PEDOT:PSS self-supporting thick films through a binary treatment with polyethylene glycol and water10.1016/j.polymer.2020.122328 ↗
40. Simultaneous enhancement of conductivity and seebeck coefficient of PEDOT:PSS by triflic acid treatment for flexible thermoelectric generator10.1016/j.synthmet.2022.117037 ↗
41. Enhanced thermoelectric properties of Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) by binary secondary dopants10.1021/acsami.5b01960 ↗
42. Semi-metallic polymers10.1038/nmat3824 ↗
43. Morphological change and mobility enhancement in PEDOT:PSS by adding Co-solvents10.1002/adma.201205158 ↗
44. Unravelling doping effects on PEDOT at the molecular level: from geometry to thermoelectric transport properties10.1021/jacs.5b06584 ↗
45. Large seebeck effect by charge-mobility engineering10.1038/ncomms8475 ↗
46. Thermoelectric performance enhancement of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) composite films by addition of dimethyl sulfoxide and urea10.1007/s11664-012-2162-y ↗
47. Correlating the seebeck coefficient of thermoelectric polymer thin films to their charge transport mechanism10.1016/j.orgel.2017.11.018 ↗
48. Sulfuric acid vapor treatment for enhancing the thermoelectric properties of PEDOT:PSS thin-films10.1007/s10854-016-4538-x ↗
49. Enhancement of thermoelectric performance of PEDOT:PSS films by post-treatment with a superacid10.1039/C8RA02058B ↗
50. Ionic liquids as post-treatment agents for simultaneous improvement of seebeck coefficient and electrical conductivity in PEDOT:PSS films10.1021/acsami.8b21709 ↗
51. A polymer film with very high seebeck coefficient and overall thermoelectric properties by secondary doping, dedoping engineering and ionic energy filtering10.1002/adfm.202411815 ↗
52. One-step post-treatment boosts thermoelectric properties of PEDOT:PSS flexible thin films10.1016/j.jmst.2022.05.047 ↗