Efficient electron injection layer for thermal stability of top emission phosphorescent organic light emitting diodes
Source abstract
Abstract
Thermal stability holds significant importance in both high-resolution and large-area organic light-emitting diodes (OLEDs) due to its potential impacts on pixel shrinkage, thereby adversely affecting visual quality and long-term device functionality. The thermal instability could be from the thermal diffusion of metal ions or small molecules occurring at the interface between the electron injection layer (EIL) and the cathode material , influenced by differing surface properties and binding strength . In this study, we meticulously engineered magnesium fluoride (MgF 2 ) as EIL to mitigate the aforementioned challenges. Important physical properties associated with the EIL/cathode interaction were systematically analyzed. Employing Ag:Yb (2.5:1) as the cathode, we achieved notable enhancements in current efficiency and a reduced turn-on voltage for a green device operating under optical microcavity conditions. Thermal degradation test conducted over 240 h on fabricated devices revealed that employing MgF 2 as the EIL markedly enhanced thermal stability compared to devices utilizing Yb as the EIL reference. The robust EIL/cathode system observed herein is attributed to the high binding energy between the EIL and cathode materials utilized in this study.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Approaches for long lifetime organic light emitting diodes
2. Efficient micro-cavity top emission oled with optimized mg:ag ratio cathode10.1364/OE.25.029906 ↗
3. OLED pixel shrinkage dependence with cathode influenced by thermal effect
4. Degradation of OLED performance by exposure to UV irradiation10.1039/C9RA09730A ↗
5. Ultrathin metal films for transparent electrodes of flexible optoelectronic devices10.1002/adfm.201606641 ↗
6. Dual enhancing properties of LiF with varying positions inside organic light-emitting devices10.1016/j.orgel.2007.07.005 ↗
7. Diffusion characteristics and induced electronic channels of magnesium in organic light-emitting diodes10.1166/jnn.2008.1247 ↗
8. Ultrathin metal films and particles on oxide surfaces: structural, electronic and chemisorptive properties10.1016/S0167-5729(96)00011-8 ↗
9. Metal adsorption and adhesion energies on mgo (100)10.1021/ja020146t ↗
10. Dielectric/metal/dielectric structures using copper as metal and MoO3 as dielectric for use as transparent electrode10.1016/j.tsf.2012.06.056 ↗
11. Bulk-like Al/Ag bilayer film due to suppression of surface plasmon resonance for high transparent organic light emitting diodes10.1016/j.orgel.2016.03.002 ↗
12. Microcavity-free broadband light outcoupling enhancement in flexible organic light-emitting diodes with nanostructured transparent metal−dielectric composite electrodes10.1021/acsnano.5b07302 ↗
13. Improvement of transparent metal top electrodes for organic solar cells by introducing a high surface energy seed layer10.1002/aenm.201200903 ↗
14. Highly efficient color stable inverted white top-emitting oleds with ultra-thin wetting layer top electrodes10.1002/adom.201300241 ↗
15. Ultrastable and atomically smooth ultrathin silver films grown on a copper seed layer10.1021/am303147w ↗
16. Ultrasmooth silver thin films deposited with a germanium nucleation layer10.1021/nl8027476 ↗
17. Ultrasmooth silver thin film electrodes with high polar liquid wettability for oled microcavity application10.1021/la104760a ↗
18. E-beam deposited ultra-smooth silver thin film on glass with different nucleation layers: an optimization study for OLED micro-cavity application10.1016/j.orgel.2010.03.022 ↗
19. Enhanced surface plasmon resonance on a smooth silver film with a seed growth layer10.1021/nn100466p ↗
20. Electronic line-up in light-emitting diodes with alkali-halide/metal cathodes10.1063/1.1562739 ↗
21. Ultrasmooth silver thin film on PEDOT:PSS nucleation layer for extended surface plasmon propagation10.1021/am201391f ↗
22. Polymer-metal hybrid transparent electrodes for flexible electronics10.1038/ncomms7503 ↗
23. Ultrathin and ultrasmooth Au films as transparent electrodes in ITO-free organic light-emitting devices10.1039/C6NR00599C ↗
24. Optimization of Mg:Ag cathodes and effect of LiF electron injection layer on the characteristics of top emission organic light emitting diodes
25. Tailoring Mg:Ag functionalities for organic light-emitting diodes10.1016/j.orgel.2018.08.051 ↗
26. Transparent organic light-emitting devices with LiF/Mg:Ag cathode10.1364/OPEX.13.000937 ↗
27. Technical status of top-emission organic lightemitting diodes
28. Transparent organic light-emitting devices with LiF/Yb:Ag cathode10.1016/j.tsf.2007.02.008 ↗
29. Transparent white organic light-emitting devices with a LiF/Yb:Ag cathode10.1364/OL.34.001174 ↗
30. Applications of Ytterbium in organic light-emitting devices as high performance and transparent electrodes10.1016/S0009-2614(02)01553-1 ↗
31. L. B. Freund, S. Suresh, Cambridge University Press, 2003.
32. Structure and growth of crystalline superlattices: from monolayer to superlattice10.1103/PhysRevB.33.3657 ↗
33. Volmer-Weber growth stages of polycrystalline metal films probed by in situ and real-time optical diagnostics10.1063/1.4935034 ↗
34. Optimizing ultrathin Ag films for high performance oxide-metal-oxide flexible transparent electrodes through surface energy modulation and template-stripping procedures10.1038/srep44576 ↗
35. Stability of heterogeneous single-atom catalysts: a scaling law mapping thermodynamics to kinetics10.1038/s41524-020-00411-6 ↗
36. Electron mean free path in elemental metals10.1063/1.4942216 ↗
37. Effects of thickness on the structural, electronic, and optical properties of MgF2 thin films: the first-principles study10.1016/j.commatsci.2013.04.031 ↗
38. Magnesium fluoride modified interfaces for organic light-emitting diode10.1016/j.tsf.2006.10.129 ↗
39. Understanding the effects of surface roughness on the temperature and pressure relevancy of water contact angles10.1016/j.colsurfa.2022.130391 ↗
40. A review of factors that affect contact angle and implications for flotation practice10.1016/j.cis.2009.07.003 ↗
41. Contact angle measurements to determine the rate of surface oxidation of artists' alkyd paints during accelerated photo-ageing10.1016/j.porgcoat.2008.09.018 ↗
42. A numerical solution to the effects of surface roughness on water–coal contact angle10.1038/s41598-020-80729-9 ↗
43. Ag−Yb (Silver-Ytterbium) System10.1007/BF02869232 ↗
44. Top-emission organic light emitting diodes with lower viewing angle dependence10.1016/j.synthmet.2013.12.020 ↗
45. A nanoporous polymer film as a diffuser as well as a light extraction component for top emitting organic light emitting diodes with a strong microcavity structure10.1039/C6NR00868B ↗
46. The suppression of viewing angle dependence of top emission organic light emitting diodes having strong microcavity characteristics by applying concave patterned anode10.1002/jsid.639 ↗
47. Enhanced device performances of a new inverted top-emitting OLEDs with relatively thick Ag electrode10.1364/OE.26.004979 ↗
48. Light modulation of top emission organic light emitting diodes showing strong microcavity effect by applying multilayered scattering filmOpt10.1364/OE.26.001185 ↗
49. Ag-Yb alloy-novel tunable plasmonic material10.3390/photonics8070288 ↗
50. Degradation of organic light-emitting diodes under different environment at high drive conditions10.1016/j.orgel.2006.10.005 ↗
51. Photodegradation of the organic/metal cathode interface in organic light-emitting devices
52. Interfacial degradation in organic optoelectronics10.1039/c2ra22770c ↗