journal article·2024-06

Acceptor molecules with different central and terminal units for P3HT based solar cells: Effects of the molecular structures on their properties

Jie Xu, Shifeng Liang, Yan Xu, Wang Ni, Miaomiao Li, Yanhou Geng

Organic Electronics· Volume 129
Publisher page

Abstract

The design strategy of acceptor materials matched with poly(3-hexylthiophene) (P3HT) is highly desired for the development of low-cost organic solar cells (OSCs). Herein, we introduced strong electron-donating central units and weak electron-withdrawing end groups to construct the acceptors with high HOMO and LUMO, modulated the molecular symmetry and conjugation length by changing the structures of central units, and synthesized six acceptor molecules, namely, TDTC-O2F, TTDTC-O2F, TTTDTC-O2F, TDTC-ThBr, TTDTC-ThBr and TTTDTC-ThBr. The high LUMO energy level of the acceptors endowed the P3HT based OSCs with relatively high V oc values. Molecular symmetry, conjugation length of central units and the terminal structure jointly affect the molecular crystallinity and miscibility of the blends. Owing to the proper film morphology, the P3HT:TTDTC-ThBr based devices achieved the champion power conversion efficiency of 6.15 %.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Regulation of polymer configurations enables green solvent-processed large-area binary all-polymer solar cells with breakthrough performance and high efficiency stretchability factor10.1002/adma.202208008 ↗
2. The molecular ordering and double-channel carrier generation of nonfullerene photovoltaics within multi-length-scale morphology10.1002/adma.202108317 ↗
3. Rational control of sequential morphology evolution and vertical distribution toward 17.18% efficiency all-small-molecule organic solar cells10.1016/j.joule.2022.10.005 ↗
4. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
5. An effective method for recovering nonradiative recombination loss in scalable organic solar cells10.1002/adfm.202000417 ↗
6. Renewed prospects for organic photovoltaics10.1021/acs.chemrev.1c00955 ↗
7. Recent progress in organic solar cells (Part II device engineering)10.1007/s11426-022-1256-8 ↗
8. Near-infrared absorbing non-fullerene acceptors with unfused D-A-D core for efficient organic solar cells10.1016/j.orgel.2021.106131 ↗
9. “Twisted” conjugated molecules as donor materials for efficient all-small-molecule organic solar cells processed with tetrahydrofuran10.1039/C9TA07760J ↗
10. Rational molecular and device design enables organic solar cells approaching 20% efficiency10.1038/s41467-024-46022-3 ↗
11. Branched terminal alkyl chain enabling 15.7% efficiency oligothiophene donor10.1002/solr.202300802 ↗
12. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
13. Single-junction organic solar cells with 19.17% efficiency enabled by introducing one asymmetric guest acceptor10.1002/adma.202110147 ↗
14. Organic solar cells with over 19% efficiency enabled by a 2D-conjugated non-fullerene acceptor featuring favorable electronic and aggregation structures10.1002/adma.202300363 ↗
15. Recent advances in single-junction organic solar cells10.1002/anie.202209021 ↗
16. Binary organic solar cells with 19.2% efficiency enabled by solid additive10.1002/adma.202301583 ↗
17. Recent advances in high-performance organic solar cells enabled by acceptor–donor–acceptor–donor–acceptor (A–DA′D–A) type acceptors10.1039/D0QM00305K ↗
18. A cost analysis of fully solution-processed ito-free organic solar modules10.1002/aenm.201802521 ↗
19. Nonfullerene acceptors for P3ht-based organic solar cells10.1039/D1TA03219D ↗
20. Direct (Hetero)Arylation polymerization: simplicity for conjugated polymer synthesis10.1021/acs.chemrev.6b00498 ↗
21. Exploration of the direct arylation polymerization method for the practical application of conjugated materials: synthetic scale-up, solar cell performance, and cost analyses10.1002/macp.201800272 ↗
22. Enhanced electrical conductivity in regioselectively synthesized poly(3-alkylthiophenes)10.1039/c39920000070 ↗
23. Analyzing the efficiency, stability and cost potential for fullerene-free organic photovoltaics in one figure of merit10.1039/C8EE00151K ↗
24. “All that glisters is not gold”: an analysis of the synthetic complexity of efficient polymer donors for polymer solar cells10.1021/ma501894w ↗
25. Development of highly conductive nanodomains in poly(3-hexylthiophene) films studied by conductive atomic force microscopy10.1016/j.polymer.2013.04.061 ↗
26. Near-infrared materials: the turning point of organic photovoltaics10.1002/adma.202107330 ↗
27. Carboxylate-substituted polythiophenes for efficient fullerene-free polymer solar cells: the effect of chlorination on their properties10.1021/acs.macromol.9b00793 ↗
28. A polythiophene derivative with superior properties for practical application in polymer solar cells10.1002/adma.201401494 ↗
29. 8.30% efficiency P3HT-based all-polymer solar cells enabled by a miscible polymer acceptor with high energy levels and efficient electron transport10.1007/s11426-022-1386-1 ↗
30. Molecular design of a non-fullerene acceptor enables a P3HT-based organic solar cell with 9.46% efficiency10.1039/D0EE01763A ↗
31. Delicate crystallinity control enables high-efficiency P3HT organic photovoltaic cells10.1039/D1TA10161G ↗
32. P3HT-Based organic solar cells with a photoresponse to 1000 Nm enabled by narrow band gap nonfullerene acceptors with high Homo levels10.1021/acsami.1c21089 ↗
33. Aggregation of non-fullerene acceptors in organic solar cells10.1039/D0TA03703F ↗
34. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
35. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
36. 13.2% efficiency of organic solar cells by controlling interfacial resistance resulting from well-distributed vertical phase separation10.1021/acsaem.0c00218 ↗
37. Unconjugated side-chain engineering enables small molecular acceptors for highly efficient non-fullerene organic solar cells: insights into the fine-tuning of acceptor properties and micromorphology10.1002/adfm.201902155 ↗
38. A quinoxaline-based D–A copolymer donor achieving 17.62% efficiency of organic solar cells10.1002/adma.202100474 ↗
39. High-efficiency organic solar cells based on asymmetric acceptors bearing one 3D shape-persistent terminal group10.1002/adfm.202103445 ↗
40. Mixed-addenda dawson-type polyoxometalates as high-performance anode interlayer materials for efficient organic optoelectronic devices10.1002/aenm.202204228 ↗
41. Charge recombination dynamics in organic photovoltaic systems with enhanced dielectric constant10.1002/adfm.201901269 ↗
42. Suppressed recombination loss in organic photovoltaics adopting a planar–mixed heterojunction architecture10.1038/s41560-022-01138-y ↗
43. Polymer:Fullerene bulk heterojunction solar cells10.1016/S1369-7021(11)70210-3 ↗
44. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
45. Quantitative relations between interaction parameter, miscibility and function in organic solar cells10.1038/s41563-017-0005-1 ↗
46. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
47. Predicting morphologies of solution processed polymer:fullerene blends10.1021/ja405493j ↗