journal article·2022-12

Optimization of thermoelectric performances of conjugated polymers containing Trans-1,2-di(2-thienyl)ethylene subunits via structural modulation and doping engineering

Mengsu Zhu, Zixin Chang, Sicheng Wu, Yong Sun, Yang Li, Yigang Jin, Ye Zou, Yimeng Sun, Wei Xu, Daoben Zhu

Organic Electronics· Volume 111
Publisher page

Abstract

Focusing on the thermoelectric (TE) properties of (E)-1,2-di(thiophen-2-yl)ethene (TVT)-based organic conjugated polymers, backbone modification via copolymerization with different subunits and chemical doping with variant dopants are implemented. Herein, two polymers named PTVTTT14 and PTVTDTT18 with subtle structural difference are synthesized by copolymerizing TVT with TT (thieno[3,2- b ]thiophene) and DTT (dithieno[3,2-b:2′,3′-d]thiophene), respectively. Cooperation with less extended fused thiophene units TT, PTVTTT14 displays better solubility and hence larger molecular weight even with shortening alkyl side-chains comparing to that of PTVTDTT18. All these factors facilitate its better thermoelectric conversion efficiency. Furthermore, three dopants (CuTFSI, CN 6CP and F 4TCNQ) were employed to optimize polymers` TE performances. PTVTTT14 and PTVTDTT18 display highest PF of 9.4 and 5.0 μW m −1 K −2 with F 4 TCNQ as dopant. The higher electron affinity (EA) of F 4TCNQ and CN 6 CP than ionization energy (IE) of the two polymers is energetically favorable to charge transfer, but the poor solubility of CN 6 CP hindering its effective doping. Moreover, CuTFSI-doped polymers show highest conductivity but lowest Seebeck coefficient ( S) and power factor (PF) on account of its strong doping ability. Prospectively, reasonable ideas for polymers design and dopants selection are provided to obtain TVT-based polymers with better TE properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Wearable thermoelectric materials and devices for self-powered electronic systems10.1002/adma.202102990 ↗
2. Organic-based thermoelectrics10.1039/C9TA11717B ↗
3. Organic-based flexible thermoelectric generators: from materials to devices
4. Organic thermoelectric materials for energy harvesting and temperature control10.1038/natrevmats.2016.50 ↗
5. Doped thieno[3,4-b]thiophene-based copolymers for p-type organic thermoelectric materials10.1039/D1TC00211B ↗
6. Backbone structure effect on the thermoelectric properties of IDT-based p-type conjugated polymers10.1002/marc.201900322 ↗
7. High-performance ternary π-conjugated copolymers containing diarylethylene units: synthesis, properties, and study of substituent effects on molecular aggregation and charge transport characteristics10.1039/C8TC04940H ↗
8. A design strategy for high mobility stretchable polymer semiconductors10.1038/s41467-021-23798-2 ↗
9. A role of side-chain regiochemistry of thienylene–vinylene–thienylene (TVT) in the transistor performance of isomeric polymers10.1021/acs.macromol.6b02447 ↗
10. New donor–donor type copolymers with rigid and coplanar structures for high-mobility organic field-effect transistors10.1021/cm502486n ↗
11. Influence of side-chain regiochemistry on the transistor performance of high-mobility, all-donor polymers10.1021/ja508798s ↗
12. Selenium-substituted diketopyrrolopyrrole polymer for high-performance p-type organic thermoelectric materials10.1002/anie.201911058 ↗
13. Benzothienobenzothiophene-based molecular conductors: high conductivity, large thermoelectric power factor, and one-dimensional instability10.1021/jacs.6b01213 ↗
14. Doped organic transistors10.1021/acs.chemrev.6b00329 ↗
15. Enhancement of the thermoelectric performance for DTC-based polymer via N-octyl substitution10.1039/D0TC00049C ↗
16. Degenerately doped semi-crystalline polymers for high performance thermoelectrics10.1002/adfm.202006900 ↗
17. Manipulating carrier concentration by self-assembled monolayers in thermoelectric polymer thin films10.1021/acsami.1c04020 ↗
18. Enhanced thermoelectric performance of a donor–acceptor-based two-dimensional conjugated polymer with high crystallinity10.1021/acsaem.1c00274 ↗
19. Effect of alkyl side chain length on doping kinetics, thermopower, and charge transport properties in highly oriented F4TCNQ-doped PBTTT films10.1021/acsami.8b17594 ↗
20. Influence of dopant size and doping method on the structure and thermoelectric properties of PBTTT films doped with F6TCNNQ and F4TCNQ10.1039/D0TC02828B ↗
21. Control of chain alignment and crystallization helps enhance charge conductivities and thermoelectric power factors in sequentially doped P3HT:F4TCNQ films10.1021/acs.macromol.9b02389 ↗
22. Optimization of thermoelectric properties of polymers by incorporating oligoethylene glycol side chains and sequential solution doping with preannealing treatment10.1021/acs.macromol.0c01025 ↗
23. Doping of donor-acceptor polymers with long side chains via solution mixing for advancing thermoelectric properties10.1016/j.nanoen.2019.01.075 ↗
24. Position-induced efficient doping for highly doped organic thermoelectric materials10.1002/aelm.202101142 ↗
25. Leveraging sequential doping of semiconducting polymers to enable functionally graded materials for organic thermoelectrics10.1021/acs.macromol.0c00402 ↗
26. HOMO-HOMO electron transfer: an elegant strategy for p-type doping of polymer semiconductors toward thermoelectric applications10.1002/adma.202003596 ↗
27. Enhancement of the thermoelectric performance of DPP based polymers by introducing one 3,4-ethylenedioxythiophene electron-rich building block10.1039/D0TC01047B ↗
28. Enhancement of thermoelectric properties of D-A conjugated polymer through constructing random copolymers with more electronic donors10.1002/pol.20210604 ↗
29. Conductive, solution-processed dioxythiophene copolymers for thermoelectric and transparent electrode applications10.1002/aenm.201900395 ↗
30. Recent advances in n-type organic thermoelectric materials, dopants, and doping strategies10.1039/D1TC06175E ↗
31. General strategies to improve thermoelectric performance with an emphasis on tin and germanium chalcogenides as thermoelectric materials10.1039/D1TA10421G ↗
32. High conductivity in molecularly p-doped diketopyrrolopyrrole-based polymer: the impact of a high dopant strength and good structural order10.1002/adma.201506295 ↗
33. Controlling molecular doping in organic semiconductors10.1002/adma.201703063 ↗
34. Charge-transfer crystallites as molecular electrical dopants10.1038/ncomms9560 ↗
35. Chemical doping of organic semiconductors for thermoelectric applications10.1039/D0CS00204F ↗
36. Correlation between Seebeck coefficient and transport energy level in poly (3-hexylthiophene)10.1016/j.orgel.2018.02.008 ↗
37. Quinoid-resonant conducting polymers achieve high electrical conductivity over 4000 S cm-1 for thermoelectrics10.1002/advs.201800947 ↗
38. Molecular and supramolecular parameters dictating the thermoelectric performance of conducting polymers: a case study using poly(3-alkylthiophene)s10.1021/acs.jpcc.5b00135 ↗
39. Side-chain effects on the thermoelectric properties of fluorene-based copolymers10.1002/marc.201600817 ↗
40. Influence of dopant–host energy level offset on thermoelectric properties of doped organic semiconductors10.1021/acs.jpcc.8b03804 ↗