journal article·2024-10

A universal hole transport layer for efficient organic solar cells processed by blade coating

Zijian Li, Hui Huang, Xianghui Zeng, Baoshen Deng, Chengsheng Li, Chuanlin Gao, Guangye Zhang, Shunpu Li, Chen Xie

Organic Electronics· Volume 133
Publisher page

Abstract

Doctor-blade coating technology is a roll-to-roll compatible high-throughput thin film fabrication route. In this work, doctor-blading was applied for fabricating organic solar cells (OSCs) using a polyoxometalates material phosphomolybdic acid (PMA) as a hole transport layer (HTL). Compared to PEDOT:PSS, PMA-based devices demonstrate lower trap-assisted recombination, higher hole mobility, prolonged charge carrier lifetime and faster charge collection. With PM6:Y6 as active layer, PMA-based device delivered a high power conversion efficiency (PCE) of 17.79 % with a boosted short-circuit current density (J SC) value of 28.08 mA/cm 2, which is one of the best performances for PM6:Y6-based solar cells through doctor-blading process. In addition, the performance improvement was observed in both conventional and inverted structured devices with various donor: acceptor combinations. These results indicate the high universality of PMA for printable processing and its prospect in preparation of the industrial production of OSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
3. Hybrid cathode interlayer enables 17.4% efficiency binary organic solar cells10.1002/advs.202105575 ↗
4. Synergistic optimization enables large-area flexible organic solar cells to maintain over 98% PCE of the small-area rigid devices10.1002/adma.202005153 ↗
5. Recent progress in large-area organic solar cells10.1002/smsc.202300004 ↗
6. A multi-objective optimization-based layer-by-layer blade-coating approach for organic solar cells: rational control of vertical stratification for high performance10.1039/C9EE02295C ↗
7. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
8. Over 19% efficiency organic solar cells by regulating multidimensional intermolecular interactions10.1002/adma.202208986 ↗
9. Tandem organic solar cell with 20.2% efficiency10.1016/j.joule.2021.12.017 ↗
10. Binary organic solar cells with 19.2% efficiency enabled by solid additive
11. Hole/electron transporting materials for nonfullerene organic solar cells10.1002/chem.202104453 ↗
12. Hole transport layers for organic solar cells: recent progress and prospects
13. Facilely modified nickel-based hole transporting layers for organic solar cells with 19.12% efficiency and enhanced stability
14. Versatile self-assembled hole transport monolayer enables facile processing organic solar cells over 18% efficiency with good generality
15. Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells10.1039/c2jm35646e ↗
16. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
17. Large-area organic solar cells by accelerated blade coating10.1016/j.orgel.2015.03.001 ↗
18. Achieving balanced crystallinity of donor and acceptor by combining blade-coating and ternary strategies in organic solar cells10.1002/adma.201805041 ↗
19. Instability mechanism of phosphomolybdic acid solution and its effect on organic solar cells as a hole-transporting layer10.1016/j.orgel.2023.106831 ↗
20. N-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells10.1016/j.joule.2021.01.011 ↗
21. Tandem organic solar cells with efficiency over 19% via the careful subcell design and optimization
22. Mitigating the efficiency loss of organic photovoltaic cells using phosphomolybdic acid-doped PEDOT:PSS as hole transporting layer10.1002/aesr.202300006 ↗
23. Highly efficient low-bandgap polymer solar cells with solution-processed and annealing-free phosphomolybdic acid as hole-transport layers10.1021/am508828n ↗
24. Blade-cast nonfullerene organic solar cells in air with excellent morphology, efficiency, and stability
25. Polyoxometalate clusters, nanostructures and materials: from self assembly to designer materials and devices10.1039/B502666K ↗
26. A cost-effective commercial soluble oxide cluster for highly efficient and stable organic solar cells10.1039/C3TA13762G ↗
27. Fully coated semitransparent organic solar cells with a doctor-blade-coated composite anode buffer layer of phosphomolybdic acid and PEDOT:PSS and a spray-coated silver nanowire top electrode10.1021/acsami.7b13346 ↗
28. Universal hole transporting material via mutual doping for conventional, inverted, and blade-coated large-area organic solar cells10.1021/acs.chemmater.2c00655 ↗
29. Electron and hole transport in poly(p-phenylene vinylene) devices10.1063/1.116583 ↗
30. Solvent‐regulated electronic structure and morphology of inorganic hole injection layers for efficient quantum dot light‐emitting diodes10.1002/adpr.202000124 ↗
31. All-solution-processed quantum dot light-emitting diode using phosphomolybdic acid as hole injection layer10.3390/ma16041371 ↗
32. Efficient tandem quantum-dot LEDs enabled by an inorganic semiconductor-metal-dielectric interconnecting layer stack
33. Fabrication of organic light-emitting devices comprising stacked light-emitting units by solution-based processes10.1002/adma.201403973 ↗
34. Overcoming microstructural limitations in water processed organic solar cells by engineering customized nanoparticulate inks10.1002/aenm.201702857 ↗
35. Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells10.1038/ncomms8348 ↗
36. 3D printable high-performance conducting polymer hydrogel for all-hydrogel bioelectronic interfaces10.1038/s41563-023-01569-2 ↗
37. Structure and electric conductivity in lithium-chloro-phosphotungstate glasses10.1080/01411594.2024.2322953 ↗
38. Overcoming the limitations of transient photovoltage measurements for studying recombination in organic solar cells10.1002/solr.201900581 ↗