journal article·2020-09

Enhanced efficiency and stability of organic light-emitting diodes via binary self-assembled monolayers of aromatic and aliphatic compounds on indium tin oxide

Xiaoxiao Mi, Basílio Alberto Rungo, Xiaofei Dong, Hongli Liu, Xianggao Li, Shirong Wang

Publisher page

Abstract

Abstract Regulating hole injection via self-assembled monolayers (SAMs) modification on indium tin oxide (ITO) is significantly favourable for achieving high efficiency and stability of organic light-emitting diodes (OLEDs). In this work, ITO was modified by pentafluorobenzylphosphonic acid (F5BnPA) and heneicosafluorododecylphosphonic acid (HF21DPA) in a binary SAMs way. By altering mole ratios of these two materials, ITO work function can be achieved from 5.20 to 5.82 eV and the roles of F5BnPA and HF21DPA in affecting hole injection and device performances were also explored. The results demonstrate a synergistic effect that HF21DPA improves ITO work function efficiently for its fluorinated alkyl chain and F5BnPA enhances the charge transfer directly due to its aromatic group gathering HOMO level. When α-naphthylphenylbiphenyldiamine (NPB) and 4,4′,4″-tris(carbazol-9-yl) triphenylamine (TCTA) were used as hole transport layers (HTLs) in OLEDs with a structure of ITO/SAM/HTL/tris(8-hydroxyquinolino) aluminum (III) (Alq3)/lithium fluoride (LiF)/Al, brightness up to 36839 and 58189 cd/m2 and current efficiency up to 5.75 and 7.35 cd/A were obtained, respectively. Furthermore, the influence of binary SAMs on the stability of NPB-based OLEDs was studied. The maximum half-lifetime at the initial brightness of 2200 cd/m2 reaches 368.0 h, which is 75.1 times that of the poly(3, 4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-containing device. The high durability is attributed to higher hydrophobicity and lower hole injection barrier caused by SAMs. This is the first report on the synergistic effect of aromatic and aliphatic compounds in binary SAMs on regulating hole injection, showing a new approach of obtaining high efficiency and stability of OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. Highly efficient organic light-emitting diodes from delayed fluorescence10.1038/nature11687 ↗
3. Selective triplet exciton formation in a single molecule10.1038/s41586-019-1284-2 ↗
4. Molecular design of hole transport materials for obtaining high durability in organic electroluminescent diodes10.1063/1.113123 ↗
5. Influence of temperature and drive current on degradation mechanisms in organic light-emitting diodes10.1063/1.1476704 ↗
6. The doping effect of cesium-based compounds on carrier transport and operational stability in organic light-emitting diodes10.1016/j.orgel.2014.03.027 ↗
7. Study of voltage decrease in organic light emitting diodes during the initial stage of lifetime10.1016/j.sse.2015.11.032 ↗
8. Elucidation on Joule heating and its consequences on the performance of organic light emitting diodes10.1063/1.4861412 ↗
9. Degradation of organic light emitting diode: heat related issues and solutions10.1016/j.synthmet.2015.10.016 ↗
10. Green and low-cost approach to modify the indium tin oxide anodes in organic light-emitting diodes by electrochemical treatment in NaCl aqueous solution10.1016/j.apsusc.2017.05.209 ↗
11. Self-assembled monolayer-modified ITO for efficient organic light-emitting diodes: the impact of different self-assemble monolayers on interfacial and electroluminescent properties10.1016/j.orgel.2018.01.038 ↗
12. Self-assembled electroactive phosphonic acids on ITO: maximizing hole-injection in polymer light-emitting diodes10.1002/adfm.200800033 ↗
13. Energy level alignments at the interface of N,N'-bis-(1-naphthyl)-N,N'-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/Ag-doped In2O3 and NPB/Sn-doped In2O310.1016/j.apsusc.2016.06.157 ↗
14. Tuning the work function of polar zinc oxide surfaces using modified phosphonic acid self-assembled monolayers10.1002/adfm.201401493 ↗
15. The potential of molecular self-assembled monolayers in organic electronic devices10.1002/adma.201100337 ↗
16. Multitechnique characterization of self-assembled carboxylic acid-terminated alkanethiol monolayers on nanoparticle and flat gold surfaces10.1021/jp201213g ↗
17. Modification of ITO anodes with self-assembled monolayers for enhancing hole injection in OLEDs10.1063/1.5086800 ↗
18. Systematic investigation of surface modification by organosiloxane self-assembled on indium–tin oxide for improved hole injection in organic light-emitting diodes10.1021/am500399e ↗
19. Covalently bound hole-injecting nanostructures. Systematics of molecular architecture, thickness, saturation, and electron-blocking characteristics on organic light-emitting diode luminance, turn-on voltage, and quantum efficiency10.1021/ja051077w ↗
20. Comparative properties of siloxane vs phosphonate monolayers on A Key titanium alloy10.1021/la048227l ↗
21. Anchoring functional molecules on TiO2 surfaces: a comparison between the carboxylic and the phosphonic acid group10.1140/epjp/i2011-11098-4 ↗
22. The electronic structure of mixed self-assembled monolayers10.1021/nn102360d ↗
23. “Supersaturated” self-assembled charge-selective interfacial layers for organic solar cells10.1021/ja508453n ↗
24. Continuous modulation of electrode work function with mixed self-assembled monolayers and its effect in charge injection10.1021/la900046b ↗
25. Approaching charge balance in organic light-emitting diodes by tuning charge injection barriers with mixed monolayers10.1021/la2036423 ↗
26. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
27. Electron-transfer processes in zinc phthalocyanine–phosphonic acid monolayers on ITO: characterization of orientation and charge-transfer kinetics by waveguide spectroelectrochemistry10.1021/jz3002426 ↗
28. Binary self-assembled monolayers: apparent exponential dependence of resistance on average molecular length10.1016/j.orgel.2011.02.018 ↗
29. Electrical properties of SAM-modified ITO surface using aromatic small molecules with double bond carboxylic acid groups for OLED applications10.1016/j.apsusc.2014.05.181 ↗
30. The effect of electric field strength on electroplex emission at the interface of NPB/PBD organic light-emitting diodes10.1016/j.apsusc.2006.08.046 ↗
31. A multifunctional iridium-carbazolyl orange phosphor for high-performance two-element WOLED exploiting exciton-managed fluorescence/phosphorescence10.1002/adfm.200701115 ↗
32. Crosslinkable hole-transport layer on conducting polymer for high-efficiency white polymer light-emitting diodes10.1002/adma.200502769 ↗
33. Tetraphenylsilane derivatives spiro-annulated by triphenylamine/carbazole with enhanced HOMO energy levels and glass transition temperatures without lowering triplet energy: host materials for efficient blue phosphorescent OLEDs10.1039/C2TC00082B ↗
34. Hole mobility of N,N′-bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine investigated by using space-charge-limited currents10.1063/1.2741055 ↗
35. Enhancement of external quantum efficiency and reduction of roll-off in blue phosphorescent organic light emitt diodes using TCTA inter-layer10.1016/j.optmat.2014.05.010 ↗
36. Degradation mechanisms in organic light emitting diodes10.1016/S0379-6779(99)00370-7 ↗
37. Work function measurements on indium tin oxide films10.1016/S0368-2048(01)00310-3 ↗
38. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
39. Degradation of PEDOT:PSS hole injection layers by electrons in organic light emitting devices10.1016/j.orgel.2019.03.009 ↗
40. Effect of ITO surface modification on the OLED device lifetime10.1021/la4049659 ↗
41. Time-resolved fluorescence studies of degradation in tris(8-hydroxyquinoline) aluminum (AlQ3)-based organic light emitting devices (OLEDs)10.1016/S0379-6779(01)00472-6 ↗
42. Enhanced lifetime of organic light-emitting diodes using soluble tetraalkyl-substituted copper phthalocyanines as anode buffer layers10.1039/C6TC01864E ↗
43. Degradation mechanisms and reactions in organic light-emitting devices10.1021/cr400704v ↗
44. Impact of Joule heating on the brightness homogeneity of organic light emitting devices10.1063/1.2711708 ↗
45. Interfacial engineering in solution processing of silicon-based hybrid multilayer for high performance thin film encapsulation10.1021/acsami.9b14994 ↗
46. Effects of organic acids modified ITO anodes on luminescent properties and stability of OLED devices10.1007/s11801-018-8018-9 ↗