journal article·2023-07

SnS/PEDOT:PSS composite films with enhanced surface conductivities induced by solution post-treatment and their application in flexible thermoelectric

Qinggang Wu, Keyu Zha, Jiyun Zhang, Jiaxuan Zhang, Jiefeng Hai, Zhenhuan Lu

Organic Electronics· Volume 118
Publisher page

Abstract

Developing low-cost and high-performance thermoelectric materials is warranted. Herein, a series of flexible thermoelectric organic–inorganic composite films of tin sulfide (SnS)/poly(3, 4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and SnS/PEDOT:PSS/multiwalled carbon nanotube (MWCNT) are prepared by drop coating. Then, a water–methanol solution is spun on the composite films to further improve the upper surface layer`s conductivity. This facile water–methanol post-treatment does not affect the lower part of the film, which keeps the Seebeck coefficient of the film from being significantly reduced. As a consequence, SnS/PEDOT:PSS films show the most significant conductivity increase rate of 28.8% and the maximum power factor (PF) of 43.11 μW m −1 K −2, whereas those for the SnS/PEDOT:PSS/MWCNT films are 4.5% and 44.54 μW m −1 K −2, respectively. In addition, the prepared composite films show good stability in bending tests and could be applied to construct six-legged flexible thermoelectric devices to evaluate the prospects of the flexible thermoelectric application of these films. Our strategy for film design offers a new idea for thermoelectric research.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Sensor and Energy Harvesting Materials · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Conductive polymers for thermoelectric power generation10.1016/j.pmatsci.2017.09.004 ↗
2. A wearable thermoelectric generator fabricated on a glass fabric10.1039/c4ee00242c ↗
3. A comprehensive review on the output voltage/power of wearable thermoelectric generators concerning their geometry and thermoelectric materials10.1016/j.nanoen.2021.106325 ↗
4. Nonconfinement growth of edge-curved molecular crystals for self-focused microlasers10.1126/sciadv.abn8106 ↗
5. Recent developments in flexible thermoelectrics: from materials to devices10.1016/j.rser.2020.110448 ↗
6. Correlating the Seebeck coefficient of thermoelectric polymer thin films to their charge transport mechanism10.1016/j.orgel.2017.11.018 ↗
7. Surface defect-induced electronic structures of lead-free Cs2AgBiBr6 double-perovskite for efficiently solar-driven photocatalytic performance10.1016/j.apsusc.2022.155446 ↗
8. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
9. Recent advances in organic polymer thermoelectric composites10.1039/C6TC05488A ↗
10. Conducting polymer-based flexible thermoelectric materials and devices: from mechanisms to applications10.1016/j.pmatsci.2021.100840 ↗
11. n-Type nanostructured thermoelectric materials prepared from chemically synthesized ultrathin Bi2Te3 nanoplates10.1021/nl203389x ↗
12. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
13. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
14. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
15. Enhanced thermoelectric figure-of-merit in spark plasma sintered nanostructured n-type SiGe alloys10.1063/1.4768297 ↗
16. SnSe/SnS: multifunctions beyond thermoelectricity10.54227/mlab.20220006 ↗
17. Realizing high‐ranged out‐of‐plane ZTs in N‐type SnSe crystals through promoting continuous phase transition10.1002/aenm.201901334 ↗
18. On the band gap location and core spectra of orthorhombic IV-VI compounds SnS and SnSe10.1002/pssb.200844235 ↗
19. Thermoelectrics with earth abundant elements: low thermal conductivity and high thermopower in doped SnS10.1039/C4TA04462B ↗
20. High thermoelectric performance in low-cost SnS(0.91)Se(0.09) crystals10.1126/science.aax5123 ↗
21. Thermoelectric properties of Sn-S bulk materials prepared by mechanical alloying and spark plasma sintering10.1007/s11664-014-3127-0 ↗
22. Fabrication of porous SnS nanosheets and their combination with conductive polymer for hybrid thermoelectric application10.1016/j.cej.2018.09.106 ↗
23. Conductive polymer based high-performance hybrid thermoelectrics: polyaniline/tin(II) sulfide nanosheet composites10.1016/j.polymer.2018.11.036 ↗
24. The high thermoelectric properties of conducting polyaniline with special submicron-fibre structure10.1246/cl.2005.522 ↗
25. Preparation and thermoelectric properties of multi-walled carbon nanotubes/polypyrrole composites10.1016/j.synthmet.2014.06.003 ↗
26. Anion-Dependent molecular doping and charge transport in ferric salt-doped P3HT for thermoelectric application10.1021/acsaelm.0c01067 ↗
27. Modulating electronic transport properties of carbon nanotubes to improve the thermoelectric power factor via nanoparticle decoration10.1021/nn102999h ↗
28. Thermal degradation mechanisms of PEDOT:PSS10.1016/j.orgel.2008.10.008 ↗
29. Conducting polymer-based flexible thermoelectric materials and devices: from mechanisms to applications10.1016/j.pmatsci.2021.100840 ↗
30. Organic-based flexible thermoelectric generators: from materials to devices10.1016/j.nanoen.2021.106774 ↗
31. Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) by binary secondary dopants10.1021/acsami.5b01960 ↗
32. High-performance solution-processed single-junction polymer solar cell achievable by post-treatment of PEDOT:PSS layer with water-containing methanol10.1021/acsami.6b12389 ↗
33. Highly conducting free-standing poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) films with improved thermoelectric performances10.1016/j.synthmet.2010.09.031 ↗
34. Role of interchain coupling in the metallic state of conducting polymers10.1103/PhysRevLett.109.106405 ↗
35. Superwettable Surface-Dependent efficiently electrocatalytic water splitting based on their excellent liquid adsorption and gas desorption10.1016/j.cej.2022.139513 ↗
36. Enhancement of thermoelectric performance of PEDOT:PSS films by post-treatment with a superacid10.1039/C8RA02058B ↗
37. Improved thermoelectric properties and environmental stability of conducting PEDOT:PSS films post-treated with imidazolium ionic liquids10.3389/fchem.2019.00870 ↗
38. Enhanced thermoelectric performance of poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) with long‐term humidity stability via sequential treatment with trifluoroacetic acid10.1002/pi.5921 ↗
39. Enhanced performance of SnSe/PEDOT: PSS composite films by MWCNTs for flexible thermoelectric power generator10.1016/j.jallcom.2021.162844 ↗
40. Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite10.1016/j.carbon.2012.07.029 ↗
41. Hybrid energy storage: the merging of battery and supercapacitor chemistries10.1039/C4CS00266K ↗
42. High pressure: a feasible tool for the synthesis of unprecedented inorganic compounds10.1039/D0QI00477D ↗
43. Enhanced solar cell performance of P3HT:PCBM by SnS nanoparticles10.1016/j.solener.2020.02.031 ↗
44. Photovoltaic performance of hybrid ITO/PEDOT:PSS/n-SnS/Al solar cell structure10.1088/1674-4926/37/7/074002 ↗
45. Advancing flexible thermoelectric devices with polymer composites10.1002/admt.202000049 ↗
46. A promising approach to enhanced thermoelectric properties using carbon nanotube networks10.1002/adma.200902221 ↗
47. Engineering carrier scattering at the interfaces in polyaniline based nanocomposites for high thermoelectric performances10.1039/C6QM00188B ↗
48. Polymer morphology and interfacial charge transfer dominate over energy-dependent scattering in organic-inorganic thermoelectrics10.1038/s41467-018-07435-z ↗
49. Improved thermoelectric behavior of nanotube-filled polymer composites with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate)10.1021/nn9013577 ↗
50. Light-weight flexible carbon nanotube based organic composites with large thermoelectric power factors10.1021/nn202868a ↗
51. Thermoelectric polymer films with a significantly high Seebeck coefficient and thermoelectric power factor obtained through surface energy filtering10.1039/D0TA05324D ↗
52. Enhancement of the Seebeck coefficient of organic thermoelectric materials via energy filtering of charge carriers10.31635/ccschem.021.202101069 ↗
53. Flexible films of poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate)/SnS nanobelt thermoelectric composites10.1016/j.compscitech.2017.12.028 ↗
54. Water conduction through the hydrophobic channel of a carbon nanotube10.1038/35102535 ↗
55. Synthesis and characterisation of multi-walled carbon nanotubes (MWCNTs)10.1080/01430750.2018.1472657 ↗
56. Effects of a base coating used for electropolymerization of poly(3,4-ethylenedioxythiophene) on indium tin oxide electrode10.1016/j.tsf.2006.05.015 ↗
57. Liquid exfoliated graphene as dopant for improving the thermoelectric power factor of conductive PEDOT:PSS nanofilm with hydrazine treatment10.1021/acsami.5b03692 ↗
58. Raman spectra of MWCNTs and MWCNT-based H2-adsorbing system10.1016/S0008-6223(02)00148-3 ↗
59. Solution Processable PEDOT:PSS/Multiwalled Carbon Nanotube Composite Films for Flexible Electrode Applications
60. Atmospheric pressure chemical vapor deposition of tin sulfides (SnS, Sn2S3, and SnS2) on glass10.1021/cm990005z ↗
61. Optical and Raman scattering studies on SnS nanoparticles10.1016/j.jallcom.2011.02.141 ↗
62. Infrared and Raman spectra of the IV-VI compounds SnS and SnSe10.1103/PhysRevB.15.2177 ↗
63. Solution-processed PEDOT:PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids10.1021/am404113n ↗