journal article·2014-09

High-efficiency inverted polymer solar cells via dual effects of introducing the high boiling point solvent and the high conductive PEDOT:PSS layer

Vikas Kumar, Heming Wang, Cornelia Rodenburg

Organic Electronics· Volume 15· Issue 9
Publisher page

Abstract

Abstract Polymer solar cells (PSCs) are of great interest in the past decade owing to their potentially low-cost in the manufacturing by the solution-based roll to roll method. In this paper, a novel inverted device structure was introduced by inserting a high conductive PEDOT:PSS (hcPEDOT:PSS) layer between the Au nanoparticles (NPs)-embedded hole transport layer (PEDOT:PSS) and the top electrode layer. Power conversion efficiency (PCE) initially reached up to 4.51%, illustrating ∼10% higher compared with the device similarly enhanced by Au NPs plasmonics where only one PEDOT:PSS layer with the embedded Au NPs was used in single bulk heterojunction inverted PSCs based on the poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methylester (P3HT:PCBM). The PCE was further improved from 4.51% to 5.01% by adding the high-boiling point solvent of 1,8-diiodooctane (DD) into the active layer, presenting ∼20% enhancement in PCE through dual effects of introducing the high boiling point solvent and the high conductive PEDOT:PSS layer. Morphologies of the active layers were characterised by SEM and AFM separately in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A new silicon p–n junction photocell for converting solar radiation into electrical power10.1063/1.1721711 ↗
3. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
4. Areviewon the development of the inverted polymersolar cell architecture10.1080/15583724.2010.515764 ↗
5. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
6. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
7. Thermally stable efficient polymer solar cells with nanoscale control of the inter-penetrating network morphology10.1002/adfm.200500211 ↗
8. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
9. Science, outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
10. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
11. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
12. Efficiency potential of organic bulk heterojunction solar cells10.1002/pip.797 ↗
13. Ultrathin, high-efficiency, broad-band, omni-acceptance, organic solar cells enhanced by plasmonic cavity with subwavelength hole array10.1364/OE.21.000A60 ↗
14. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
15. Design rules for donors in bulk-heterojunction solarcells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
16. Ultimate efficiency of polymer-fullerene bulk heterojunction solar cells
17. Plasmonics for improved photovoltaic devices10.1038/nmat2629 ↗
18. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
19. A plasmonically enhanced polymer solar cell with gold–silica core–shell nanorods10.1016/j.orgel.2013.05.038 ↗
20. The dual localized surface plasmonic effects of gold nanodots and gold nanoparticles enhance the performance of bulk heterojunction polymer solar cells10.1016/j.orgel.2013.06.012 ↗
21. Charge-carrier dynamics in hybrid plasmonic organic solar cells with Ag nanoparticles10.1063/1.3601742 ↗
22. Insight into the efficiency enhancement of polymer solar cells by incorporating gold nanoparticles10.1016/j.solmat.2012.12.016 ↗
23. Plasmonic forward scattering effect in organic solar cells: a powerful optical engineering method10.1038/srep01726 ↗
24. Plasmonic organic photovoltaic devices with graphene based buffer layers for stability and efficiency enhancement10.1039/c3nr00656e ↗
25. Plasmonic silver nanoparticles for improved organic solar cells10.1016/j.solmat.2012.05.018 ↗
26. Plasmonic-enhanced organic photovoltaics: breaking the 10% efficiency barrier10.1002/adma.201203323 ↗
27. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
28. Power conversion efficiency enhancement of organic solar cells by addition of gold nanostars, nanorods and nanospheres10.1016/j.orgel.2013.04.008 ↗
29. Efficiency enhancement of polymer solar cells by incorporating a self-assembled layer of silver nanodisks10.1016/j.solmat.2011.07.007 ↗
30. Enhancing the durability of polymer solar cells using gold nano-dots10.1016/j.solmat.2011.06.043 ↗
31. Inverted bulk heterojunction organic photovoltaic device using solution-derived ZnO underlayer10.1063/1.2359579 ↗
32. Impact of contact evolution on the shelf life of organic solar cells10.1039/b910213b ↗
33. Effect of UV light irradiation on photovoltaic characteristics of inverted polymer solar cells containing sol–gel zinc oxide electron collection layer10.1016/j.orgel.2012.11.013 ↗
34. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
35. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
36. Plasmonic Au nanoparticles for enhanced broadband light absorption in inverted organic photovoltaic devices by plasma assisted physical vapour deposition10.1016/j.orgel.2012.11.027 ↗
37. Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells10.1016/j.solmat.2012.06.027 ↗
38. Performance characteristics of polymer photovoltaic solar cells with an additive-incorporated active layer10.1186/1556-276X-7-56 ↗
39. Enhanced performance of inverted organic solar cell by a solution-based fluorinated acceptor doped P3HT:PCBM layer10.1016/j.orgel.2013.01.031 ↗
40. Solution-processed DPP-based small molecule that gives high photovoltaic efficiency with judicious device optimization10.1021/am302896u ↗
41. Efficacy ofTiOxoptical spacer in bulk-heterojunction solar cells processed with 1,8-octanedithiol10.1063/1.2937844 ↗
42. Solvent mixtures for improving device efficiency of polymer photovoltaic devices10.1063/1.2898153 ↗
43. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
44. Controlling morphology in polymer–fullerene mixtures10.1002/adma.200701519 ↗
45. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
46. Vibrational key bands and electrical conductivity of polythiophene10.1016/0379-6779(87)90870-8 ↗
47. Effect of molecular weight on spectroscopic and spectro electrochemical properties of regioregular poly(3-hexylthiophene)10.1021/ma970627a ↗
48. Synthesis, characterization and photovoltaic properties of poly(cyclopentadithiophene-alt-isoindigo)10.1039/c3py00119a ↗
49. Imaging the bulk nanoscale morphology of organic solar cell blends using helium ion microscopy10.1021/nl202269n ↗
50. Properties of gold nanostructures sputtered on glass10.1186/1556-276X-6-96 ↗
51. Calculated absorption and scattering properties of gold nanoparticles of different size, shape, and composition: applications in biological imaging and biomedicine10.1021/jp057170o ↗
52. Alignment of gold nanorods in polymer composites and on polymer surfaces10.1002/adma.200501042 ↗