journal article·2023-03

Two nonlinear π-conjugated polymerized small molecular acceptors containing thiophene or 3,4-Difluorothiophene linkage unit for all-polymer solar cells

Zhe Zhang, Hongbin Chen, Zheng Xiao, Yu Zhu, Peiran Wang, Yunxin Zhang, Bin Kan, Chenxi Li, Yongsheng Chen

Organic Electronics· Volume 114
Publisher page

Abstract

Recently, lots of high-performance linear π-conjugated polymer acceptors based on the strategy of polymerizing small-molecule acceptors have been developed. However, there very few reports on nonlinear π-conjugated polymer acceptors for all-polymer solar cells. Here, we explored and synthesized two nonlinear π-conjugated polymer acceptors, named TZ1 or TZ2, respectively. Compared with the nonfluorinated polymer acceptor TZ1, the fluorinated polymer acceptor TZ2 presents lower energy level and better molecular aggregation. After blending with PM6, the TZ2-based device displayed more efficient exciton dissociation, higher charge carries mobilities and less charge recombination, leading to its higher J sc of 14.94 mA cm −2. As a result, the TZ2-based device achieved a PCE of 7.41%, higher than the TZ1-based device (4.06%). Our results provide a new strategy to develop nonlinear π-conjugated polymer acceptors and demonstrate the selection of suitable bridges is of importance for the construction of nonlinear π-conjugated polymer acceptors.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Polymer acceptors for high-performance all-polymer solar cells
2. Recent progress of all-polymer solar cells-From chemical structure and device physics to photovoltaic performance10.1016/j.mser.2019.100542 ↗
3. Morphology control in high-efficiency all-polymer solar cells
4. All-polymer solar cells: recent progress, challenges, and prospects10.1002/anie.201808976 ↗
5. Recent advances in single-junction organic solar cells
6. A new polymer donor enables binary all-polymer organic photovoltaic cells with 18% efficiency and excellent mechanical robustness
7. Single-Junction organic photovoltaic cell with 19% efficiency10.1002/adma.202102420 ↗
8. Effects of fluorination position on all-polymer organic solar cells10.1016/j.dyepig.2022.110180 ↗
9. Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors10.1016/j.joule.2021.04.007 ↗
10. Polymerized small molecular acceptor with branched side chains for all polymer solar cells with efficiency over 16.7%
11. A vinylene-linker-based polymer acceptor featuring a coplanar and rigid molecular conformation enables high-performance all-polymer solar cells with over 17% efficiency10.1002/adma.202200361 ↗
12. Impact of isomer design on physicochemical properties and performance in high-efficiency all-polymer solar cells10.1021/acs.macromol.0c01405 ↗
13. Yang · 2022
14. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
15. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
16. Diketopyrrolopyrrole-based acceptor polymers for photovoltaic application10.1039/c1cp20313d ↗
17. n-Type conjugated polyisoindigos10.1021/ma2012706 ↗
18. Polymer acceptor based on double B←N bridged bipyridine (BNBP) unit for high-efficiency all-polymer solar cells10.1002/adma.201601205 ↗
19. Polymerized small-molecule acceptors for high-performance all-polymer solar cells10.1002/anie.202009666 ↗
20. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar cells10.1002/anie.201707678 ↗
21. Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design10.1038/s41467-021-25638-9 ↗
22. Binary blend all-polymer solar cells with a record efficiency of 17.41% enabled by programmed fluorination both on donor and acceptor blocks10.1002/advs.202202022 ↗
23. Advances in star-shaped pi-conjugated systems: properties and applications, Macromol10.1002/marc.201400061 ↗
24. Developing Y-branched polymer acceptor with 3D architecture to reconcile between crystallinity and miscibility yielding >15% efficient all-polymer solar cells10.1002/advs.202200864 ↗
25. Hyperbranched framework of interrupted π‐conjugated polymers end‐capped with high carrier‐mobility moieties for stable light‐emitting materials with low driving voltage10.1002/pola.23685 ↗
26. Hyperbranched polymer vesicles: from self-assembly, characterization, mechanisms, and properties to applications10.1039/C4CS00274A ↗
27. “AB2 + AB” approach to hyperbranched polymers used as polymer blue light emitting materials10.1021/ma0357422 ↗
28. Synthesis and properties of hyperbranched polymers for white polymer light-emitting diodes10.1039/C9RA07371J ↗
29. Central unit fluorination of non-fullerene acceptors enables highly efficient organic solar cells with over 18 % efficiency
30. Regio-regular polymer acceptors enabled by determined fluorination on end groups for all-polymer solar cells with 15.2 % efficiency10.1002/anie.202016284 ↗
31. Lowing the energy loss of organic solar cells by molecular packing engineering via multiple molecular conjugation extension10.1007/s11426-022-1264-y ↗
32. Peripheral halogenation engineering controls molecular stacking to enable highly efficient organic solar cells10.1039/D2EE01340A ↗
33. Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology10.1021/ja306844f ↗
34. Interplay between intrachain and interchain interactions in semiconducting polymer assemblies: the HJ-aggregate model
35. Temperature induced order-disorder transition in solutions of conjugated polymers probed by optical spectroscopy10.1021/acs.jpclett.6b01641 ↗
36. Acceptor-donor-acceptor type molecules for high performance organic photovoltaics - chemistry and mechanism10.1039/D0CS00084A ↗
37. Molecular insight into efficient charge generation in low-driving-force nonfullerene organic solar cells10.1021/acs.accounts.1c00742 ↗
38. Mobility guidelines for high fill factor solution-processed small molecule solar cells10.1002/adma.201401725 ↗
39. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
40. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
41. Solvent vapor annealing-mediated crystallization directs charge generation, recombination and extraction in BHJ solar cells10.1021/acs.chemmater.7b04286 ↗
42. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
43. The coupling and competition of crystallization and phase separation, correlating thermodynamics and kinetics in OPV morphology and performances10.1038/s41467-020-20515-3 ↗