Photo-degradation in bulk heterojunction organic solar cells using a fullerene or a non-fullerene derivative electron acceptor
Source abstract
Abstract
The use of Non-Fullerene Acceptors (NFAs) in the active layer of organic solar cells (OSCs) has made it possible to exceed 18% conversion efficiency. However, OSCs still present stability issues under operational conditions that need to be surpassed for their industrialization. In this work, we investigated binary and ternary blends to examine their efficiency and their stability as active layers of OSCs. We used a fluorinated polymer (PF2) as an electron donor and two different electron acceptors, a fullerene derivative (PC 71 BM) and a NFA (EH-IDTBR). We demonstrated that using EH-IDTBR instead of PC 71 BM leads to a decrease in efficiency attributed to the low out-of-plane electron mobility measured in the blend. However, using EH-IDTBR as single electron-acceptor significantly enhanced the OSCs stability under continuous illumination. Ternary blends were tested to reach simultaneously a high efficiency and a long-term stability. The best efficiency/stability compromise appeared to be when using EH-IDTBR only as electron-acceptor. We identified changes in the main charge-carrier recombination mechanism in photo-degraded devices from bimolecular in low EH-IDTBR content blends to trap-assisted in high EH-IDTBR ones. Finally, the blend morphology at a nanometer scale appeared as stable in high EH-IDTBR content blends while photo-degradation impacted significantly the morphology of the low EH-IDTBR content blend.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
2. High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy10.1016/j.matt.2021.06.010 ↗
3. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
4. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
5. Over 11% efficiency in tandem polymer solar cells featured by a low-band-gap polymer with fine-tuned properties10.1002/adma.201600373 ↗
6. Fused benzothiadiazole: a building block for n‐type organic acceptor to achieve high‐performance organic solar cells10.1002/adma.201807577 ↗
7. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
8. Status and prospects for ternary organic photovoltaics10.1038/nphoton.2015.128 ↗
9. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
10. High-performance organic solar cells based on polymer donor/small molecule donor/nonfullerene acceptor ternary blends10.1039/C8TA11637G ↗
11. High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures10.1007/s11426-020-9736-6 ↗
12. Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss10.1039/C9TA12025D ↗
13. 16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity10.1039/C9TA06929A ↗
14. Efficient ternary organic solar cells with a new electron acceptor based on 3,4-(2,2-dihexylpropylenedioxy)thiophene10.1021/acsami.0c11128 ↗
15. Effects of side chains in third components on the performance of fused-ring electron-acceptor-based ternary organic solar cells
16. Versatile third components for efficient and stable organic solar cells10.1039/C5MH00090D ↗
17. Xu, W., Ma, X., Son, J. H., Jeong, S. Y., Niu, L., Xu, C., et al. Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk-Heterojunction or Layer-By-Layer Structure. Small n/a, 2104215 https://doi.org/10.1002/smll.202104215.10.1002/smll.202104215 ↗
18. Organic photovoltaics with 300 nm thick ternary active layers exhibiting 15.6% efficiency10.1039/D1TC02748D ↗
19. Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells10.1038/s41560-021-00820-x ↗
20. Cai, Y., Li, Y., Wang, R., Wu, H., Chen, Z., Zhang, J., et al. A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%. Adv. Mater. n/a, 2101733 https://doi.org/10.1002/adma.202101733.10.1002/adma.202101733 ↗
21. Cui, Y., Xu, Y., Yao, H., Bi, P., Hong, L., Zhang, J., et al. Single-Junction Organic Photovoltaic Cell with 19% Efficiency. Adv. Mater. n/a, 2102420 https://doi.org/10.1002/adma.202102420.10.1002/adma.202102420 ↗
22. Tandem organic solar cell with 20.2% efficiency10.1016/j.joule.2021.12.017 ↗
23. Levelised cost of energy – a theoretical justification and critical assessment10.1016/j.enpol.2018.10.004 ↗
24. Levelized costs of new generation resources in the annual energy outlook 2021. 25 (2021). https://www.eia.gov/outlooks/aeo/pdf/electricity_generation.pdf.
25. Photovoltaic failure and degradation modes10.1002/pip.2866 ↗
26. Compendium of Photovoltaic Degradation Rates - Jordan - 2016 - Progress in Photovoltaics: Research and Applications - Wiley Online Library. https://onlinelibrary.wiley.com/doi/abs/10.1002/pip.2744.
27. History of accelerated and qualification testing of terrestrial photovoltaic modules: a literature review10.1002/pip.861 ↗
28. Methodology for a reliability study on photovoltaic modules
29. Mon · 1984
30. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
31. Efficient and photostable ternary organic solar cells with a narrow band gap non-fullerene acceptor and fullerene additive10.1039/C9TA14216A ↗
32. An operando study on the photostability of nonfullerene organic solar cells10.1002/solr.201900077 ↗
33. Efficient polymer solar cells based on non-fullerene acceptors with potential device lifetime approaching 10 years10.1016/j.joule.2018.09.001 ↗
34. Non-fullerene acceptor organic photovoltaics with intrinsic operational lifetimes over 30 years10.1038/s41467-021-25718-w ↗
35. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
36. Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability10.1039/C5EE02912K ↗
37. Light-induced generation of free radicals by fullerene derivatives: an important degradation pathway in organic photovoltaics?10.1039/C7TA00175D ↗
38. Intrinsically stable organic solar cells under high-intensity illumination10.1038/s41586-019-1544-1 ↗
39. Face-on orientation of fluorinated polymers conveyed by long alkyl chains: a prerequisite for high photovoltaic performances10.1039/C8TA04127J ↗
40. ITO‐free organic photovoltaic modules based on fluorinated polymers deposited from non‐halogenated solution: a major step toward large‐scale module production10.1002/solr.201900273 ↗
41. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
42. An efficient, “burn in” free organic solar cell employing a nonfullerene electron acceptor10.1002/adma.201701156 ↗
43. Energetic disorder and activation energy in efficient ternary organic solar cells with nonfullerene acceptor Eh-IDTBR as the third component10.1002/solr.201900403 ↗
44. Highly efficient and reproducible nonfullerene solar cells from hydrocarbon solvents10.1021/acsenergylett.7b00390 ↗
45. U. Vongsaysy. ARMOR Group. (Personal Communication).
46. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
47. Versatile ternary organic solar cells: a critical review10.1039/C5EE02641E ↗
48. Recent advances in morphology optimizations towards highly efficient ternary organic solar cells10.1002/nano.202000012 ↗
49. Highly efficient quaternary organic photovoltaics by optimizing photogenerated exciton distribution and active layer morphology10.1016/j.nanoen.2020.104496 ↗
50. Polymer bulk heterojunction solar cells employing Förster resonance energy transfer10.1038/nphoton.2013.82 ↗
51. Energy transfer in ternary blend organic solar cells: recent insights and future directions10.1039/D0EE03170D ↗
52. Performance Enhancement of the P3HT/PCBM solar cells through NIR sensitization using a small-bandgap polymer10.1002/aenm.201200219 ↗
53. Hansen · 2007
54. A systematic approach to solvent selection based on cohesive energy densities in a molecular bulk heterojunction system10.1002/aenm.201000054 ↗
55. In situ characterization of polymer–fullerene bilayer stability10.1021/ma5021227 ↗
56. 3 - Essential quality parameters of plasticizers
57. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
58. Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers10.1021/ja302935n ↗
59. Effect of fullerene tris-adducts on the photovoltaic performance of P3HT:fullerene ternary blends10.1021/am400695e ↗
60. Mechanically robust and high-performance ternary solar cells combining the merits of all-polymer and fullerene blends10.1039/C7TA11382J ↗
61. Modulating the morphology and molecular arrangement via the well-compatible polymer donor in multiple working mechanisms interwined ternary organic solar cells10.1016/j.orgel.2018.12.006 ↗
62. Effect of temperature and illumination on the electrical characteristics of polymer–fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
63. Reduced carrier recombination in PbS - CuInS2 quantum dot solar cells10.1038/srep10626 ↗
64. The influence of sequential ligand exchange and elimination on the performance of P3HT:CdSe quantum dot hybrid solar cells10.1088/0957-4484/26/46/465401 ↗
65. High-performance CH3NH3PbI3 inverted planar perovskite solar cells via ammonium halide additives10.1016/j.jiec.2019.08.004 ↗
66. Enhanced operating temperature stability of organic solar cells with metal oxide hole extraction layer10.3390/polym12040992 ↗
67. Improved hole mobility and suppressed trap density in polymer-polymer dual donor based highly efficient organic solar cells10.1063/1.4942394 ↗
68. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
69. Effect of traps on the performance of bulk heterojunction organic solar cells10.1063/1.2821368 ↗