journal article·2015-10

Improvement in polymer solar cell performance and eliminating light soaking effect via UV-light treatment on conjugated polyelectrolyte interlayer

Xianqiang Li, Jie Liu, Xiaohong Tang, Shifeng Guo, Jun Li, Hong Wang, Bin Liu, Wei Lin Leong

Publisher page

Abstract

Abstract A new conjugated polyelectrolyte material, namely, poly [9,9-bis((6′- N , N , N -trimethylamino)hexyl)-fluorene- alt - co -benzoxadiazole dibromide] (PFBD) is reported as electron transport layer (ETL) in polymer solar cells. We observed a light-soaking effect and described how a pre-UV light treatment on PFBD ETL is essential for attaining higher efficiencies (>7%) and negate the light-soaking problem. The pre-UV light treatment on PFBD layer is found to directly influence its molecular structure and result in reduction of the work function and increased electron mobility in PFBD which corroborates well with the observed lower series resistances obtained from dark current analysis and impedance spectra, and therefore enhancement in open-circuit voltage and fill factor. Moreover, after the pre-UV light treatment, the maximal efficiency of the solar cells retains at a nearly similar level for at least 26 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
2. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
3. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
4. Simplified tandem polymer solar cells with an ideal self-organized recombination layer10.1002/adma.201404765 ↗
5. Interface investigation and engineering–achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
6. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
7. Photoelectron spectroscopy of the contact between the cathode and the active layers in plastic solar cells: the role of LiF10.1143/JJAP.44.3695 ↗
8. Enhanced efficiency and durability of organic electroluminescent devices by inserting a thin insulating layer at the Alq 3/cathode interface10.1016/S0379-6779(98)80071-4 ↗
9. Aluminum based cathode structure for enhanced electron injection in electroluminescent organic devices10.1063/1.122367 ↗
10. The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study10.1063/1.2784961 ↗
11. Combination of titanium oxide and a conjugated polyelectrolyte for high-performance inverted-type organic optoelectronic devices10.1002/adma.201100266 ↗
12. Recent advances in conjugated polyelectrolytes for emerging optoelectronic applications10.1021/cm102196t ↗
13. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
14. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
15. Efficient organic solar cells with polyfluorene derivatives as a cathode interfacial layer10.1016/j.orgel.2009.02.009 ↗
16. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
17. Investigation of a conjugated polyelectrolyte interlayer for inverted polymer: fullerene solar cells10.1002/aenm.201200967 ↗
18. Influence of the ionic functionalities of polyfluorene derivatives as a cathode interfacial layer on inverted polymer solar cells10.1021/am500708k ↗
19. Multi-charged conjugated polyelectrolytes as a versatile work function modifier for organic electronic devices10.1002/adfm.201301810 ↗
20. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
21. Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer10.1016/j.orgel.2011.05.027 ↗
22. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
23. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
24. Water-soluble polyfluorenes as an interfacial layer leading to cathode-independent high performance of organic solar cells10.1002/adfm.200902386 ↗
25. Electrostatic self-assembly conjugated polyelectrolyte-surfactant complex as an interlayer for high performance polymer solar cells10.1002/adfm.201200738 ↗
26. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
27. Ultrathin interlayers of a conjugated polyelectrolyte for low work-function cathodes in efficient inverted organic solar cells10.1016/j.orgel.2013.01.018 ↗
28. Ambient air processing causes light soaking effects in inverted organic solar cells employing conjugated polyelectrolyte electron transfer layer10.1021/jp507742j ↗
29. For the bright futurebulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
30. Bright quantum-dot-sized single-chain conjugated polyelectrolyte nanoparticles: synthesis, characterization and application for specific extracellular labeling and imaging10.1002/smll.201303505 ↗
31. Polyvinylpyrrolidone-modified indium tin oxide as an electron-collecting electrode for inverted polymer solar cells10.1063/1.4745772 ↗
32. Role of ZnO electron-selective layers in regular and inverted bulk heterojunction solar cells10.1021/jz200045x ↗
33. Brabec · 2008