journal article·2023-09

Instability mechanism of phosphomolybdic acid solution and its effect on organic solar cells as a hole-transporting layer

Minghao Qu, Yaozhao Li, Peng Li, Xuyong Yang, Bin Wei, Guo Chen

Organic Electronics· Volume 120
Publisher page

Abstract

Phosphomolybdic acid (H 3PMo 12O 40, PMA) containing twelve MoO 3 units exhibits an efficient hole-transporting property in organic electronics. Low-cost, easy synthesis and high thermal-stability PMA is promising solution-processed hole-transporting material for high efficiency organic solar cells (OSCs). We have studied the degradation mechanism of phosphomolybdic acid in methanol solution that was stored for days, and further investigated its effect on the performance of OSC devices. We found that PMA had been slowly reduced to phosphomolybdic heteropoly blue during the solution storage process. Besides the morphology of the PMA film, its energy level and molybdenum valence which changed with solution storage time were also investigated. The instability of PMA in methanol solution resulted in a significant negative effect on the device performance. Comparing to the PM6:Y6 device based on PMA from pristine solution, the power conversion efficiencies of OSCs with PMA hole transporting layer prepared from solution stored for 8 days and 16 days decreased from 14.69% to 3.01% and 0.58%, respectively. Fortunately, using other stable processing solvent systems instead of methanol for the fabrication of the PMA hole transporting layer has been found as an efficient method to avoid the degration of the device performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Perovskite Materials and Applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
4. The effect of processing solvent dependent film aggregation on the device performance of squaraine:PC71BM bulk heterojunction solar cells10.1016/j.orgel.2017.09.015 ↗
5. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
6. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
7. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
8. Binary organic solar cells breaking 19% via manipulating vertical component distribution10.1002/adma.202204718 ↗
9. Achieving 19% power conversion efficiency in planar-mixed heterojunction organic solar cells using a pseudo-symmetric electron acceptor10.1002/adma.202202089 ↗
10. Hole/electron transporting materials for nonfullerene organic solar cells10.1002/chem.202104453 ↗
11. Dopamine semiquinone radical doped PEDOT:PSS enhanced conductivity, work function and performance in organic solar cells10.1002/aenm.202000743 ↗
12. 18.77%Efficiency organic solar cells promoted by aqueous solution processed cobalt(II) acetate hole transporting layer10.1002/anie.202110550 ↗
13. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
14. Improvement of interfacial contacts for new small-molecule bulk-heterojunction organic photovoltaics10.1002/adma.201200963 ↗
15. Solution processed metal-oxides for organic electronic devices10.1039/c3tc30930d ↗
16. n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells10.1016/j.joule.2021.01.011 ↗
17. Multifunctional Keplerate-type polyoxometalate-organic polymer composite films for interface engineering in perovskite photodetectors10.1016/j.dyepig.2019.03.036 ↗
18. A solution-processed heteropoly acid containing MoO3 units as a hole-injection material for highly stable organic light-emitting devices10.1021/acsami.6b06723 ↗
19. All-Inorganic quantum dot light-emitting diodes with suppressed luminance quenching enabled by chloride passivated tungsten phosphate hole transport layers10.1002/smll.202100030 ↗
20. Annealing-free highly crystalline solution processed molecular metal oxides for efficient single-junction and tandem polymer solar cells10.1039/C5EE01116G ↗
21. A cost-effective commercial soluble oxide cluster for highly efficient and stable organic solar cells10.1039/C3TA13762G ↗
22. Highly efficient low-bandgap polymer solar cells with solution-processed and annealing-free phosphomolybdic acid as hole-transport layers10.1021/am508828n ↗
23. Post-treatment-free solution-processed reduced phosphomolybdic acid containing molybdenum oxide units for efficient hole-injection layers in organic light-emitting devices10.1021/acs.inorgchem.7b02842 ↗
24. Methods for the calculation of surface free energy of solids
25. Kim · J. Ind. Eng. Chem. · 2022 · 114 · 21310.1016/j.jiec.2022.07.011 ↗
26. Cioarec · Langmuir · 2011 · 27 · 361110.1021/la104760a ↗
27. Use of the combined Lifshitz–van der Waals andLewis acid–base approaches in determining the apolar and polar contributions to surface and interfacial tensions and free energies10.1163/156856102760099870 ↗
28. Improvement of OLED performances by applying annealing and surface treatment on electro-deposited CuSCN hole injection layer10.1016/j.synthmet.2020.116537 ↗