Organic solar cells based on non-fullerene acceptors containing thiophene [3,2-b] pyrrole
Source abstract
Abstract
In this work, thiophene[3,2-b] pyrrole (TP) was introduced to construct two novel fused-ring conjugated non-fullerene acceptors (NFAs), named as PTBTP-2F and PTBTP-4F. By fusing two pyrrole rings on both sides of an indacenodithiophene (IDT) unit, a brand-new central core based on TP block (denoted as PTBTP) was achieved to serve as the D core to construct an A-D-A type NFA together with two accepting units (IC–F and IC-2F). Benefitting from the nitrogen atom in the pyrrole ring, both PTBTP-2F and PTBTP-4F exhibited great film forming property as well as high LUMO energy levels of −4.09 eV and −4.11 eV for PTBTP-2F and PTBTP-4F, respectively. Since IC-2F presents stronger electron-withdrawing capability than IC-F, PTBTP-4F demonstrated red-shifted absorptions in solution/film in comparison with PTBTP-2F. When blending with donor PBDB-T, the PTBTP-2F fabricated devices achieved an average power conversion efficiency (PCE) of 11.14% with a V OC of 0.91 V, a J SC of 17.89 mA cm −2 and an FF of 68.66%, while the PTBTP-4F fabricated devices afforded a PCE of 12.33% with a V OC of 0.86 V, a J SC of 20.74 mA cm −2 and an FF of 69.02%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High open-circuit voltage and short-circuit current flexible polymer solar cells using ternary blends and ultrathin Ag-based transparent electrodes10.1039/C7TA09033A ↗
2. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
3. Perovskite and organic solar cells fabricated by inkjet printing: progress and prospects10.1002/adfm.201703704 ↗
4. Graphene:silver nanowire composite transparent electrode based flexible organic solar cells with 13.4% efficiency10.1039/C9TA07493G ↗
5. Nonfullerene acceptors for semitransparent organic solar cells10.1002/aenm.201800002 ↗
6. Air-stable organic radicals: new-generation materials for flexible electronics10.1002/adma.201908015 ↗
7. Designing efficient non-fullerene acceptors by tailoring extended fused-rings with electron-deficient groups10.1002/aenm.201501063 ↗
8. Efficient organic solar cells with non-fullerene acceptors10.1002/smll.201701120 ↗
9. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
10. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
11. Ternary organic solar cells with efficiency >16.5% based on two compatible nonfullerene acceptors10.1002/adma.201905645 ↗
12. Emerging approaches in enhancing the efficiency and stability in non-fullerene organic solar cells10.1002/aenm.202002746 ↗
13. Single-Junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
14. Asymmetric alkoxy and alkyl substitution on nonfullerene acceptors enabling high-performance organic solar cells10.1002/aenm.202003141 ↗
15. Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell10.1039/D0EE00862A ↗
16. Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells10.1038/s41467-020-17867-1 ↗
17. Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency10.1016/j.joule.2021.06.020 ↗
18. Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator10.1007/s11426-019-9634-5 ↗
19. 14.46% Efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting10.1016/j.jechem.2020.09.025 ↗
20. Wide bandgap polymer with narrow photon harvesting in visible light range enables efficient semitransparent organic photovoltaics10.1002/adfm.202107934 ↗
21. Organic photovoltaics with 300 nm thick ternary active layers exhibiting 15.6% efficiency10.1039/D1TC02748D ↗
22. No free lunch for non-fullerene acceptors10.1038/s41563-020-00836-w ↗
23. Fused thiophene-pyrrole-containing ring systems up to a heterodecacene10.1002/anie.201502840 ↗
24. Highly efficient organic solar cells based on S,N-heteroacene non-fullerene acceptors10.1021/acs.chemmater.8b02276 ↗
25. Novel nitrogen-containing heterocyclic non-fullerene acceptors for organic PhotovoltaicCells: different end-capping groups leading to a big difference of power conversion efficiencies10.1021/acsami.9b22093 ↗
26. A chlorinated nonacyclic carbazole-based acceptor affords over 15% efficiency in organic solar cells10.1039/C9TA12605H ↗
27. Molecular engineering of acceptors to control aggregation for optimized nonfullerene solar cells10.1039/D0TA00651C ↗
28. Dual functioning thieno-pyrrole fused BODIPY dyes for NIR optical imaging and photodynamic therapy: singlet oxygen generation without Heavy halogen atom assistance10.1002/asia.201500140 ↗
29. Synthesis of near-infrared absorbing and fluorescing thiophene-fused BODIPY dyes with strong electron-donating groups and their application in dye-sensitised solar cells10.1039/C8NJ04672G ↗
30. Effects of short-Axis Alkoxy substituents on molecular self-assembly and photovoltaic performance of indacenodithiophene-based acceptors10.1002/adfm.201906855 ↗
31. PBDB-T and its derivatives: a family of polymer donors enables over 17% efficiency in organic photovoltaics10.1016/j.mattod.2019.10.023 ↗
32. Tuning the hybridization of local exciton and charge-transfer states in highly efficient organic photovoltaic cells10.1002/anie.201915030 ↗
33. Ferrocene-diketopyrrolopyrrole based non-fullerene acceptors for bulk heterojunction polymer solar cells10.1039/C7TA03322B ↗
34. Determination of carrier mobility in MEH-PPV thin-films by stationary and transient current techniques10.1016/j.jnoncrysol.2011.11.001 ↗
35. Understanding energy loss in organic solar cells: toward a new efficiency regime10.1016/j.joule.2017.09.020 ↗
36. Guide for the perplexed to the Shockley–Queisser model for solar cells10.1038/s41566-019-0479-2 ↗
37. Harnessing singlet exciton fission to break the Shockley–Queisser limit10.1038/natrevmats.2017.63 ↗
38. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
39. Competition between the charge transfer state and the singlet states of donor or acceptor limiting the efficiency in polymer:fullerene solar cells10.1021/ja210029w ↗
40. Hybridization of local exciton and charge-transfer states reduces nonradiative voltage losses in organic solar cells10.1021/jacs.9b01465 ↗
41. An analysis of the factors determining the efficiency of photocurrent generation in polymer:nonfullerene acceptor solar cells10.1002/aenm.201801537 ↗
42. Correlating charge-transfer state lifetimes with material energetics in polymer:non-fullerene acceptor organic solar cells10.1021/jacs.1c00584 ↗
43. Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes10.1063/1.1891301 ↗
44. Effects of solubilizing group modification in fullerene bis-adducts on normal and inverted type polymer solar cells10.1021/cm3010369 ↗
45. Morphology and phase segregation of spin-casted films of polyfluorene/PCBM blends10.1021/ma070712a ↗