journal article·2014-12

Optimization of large-area OLED current distribution grids with self-aligned passivation

M. Janka, E. Saukko, P. Raumonen, D. Lupo

Organic Electronics· Volume 15· Issue 12
Publisher page

Abstract

Abstract The luminance homogeneity of large-area organic light emitting diodes (OLEDs) is limited by the sheet resistance of the transparent electrode. A large lateral voltage drop inside the electrode and thus brightness inhomogeneity result from the high sheet resistance of transparent conductors. To improve sheet resistance, a low-resistance metal grid is often included. To prevent shorting, the grid needs to be passivated. However, since passivation further decreases the device active area, accurate alignment of the passivation layer is crucial. We report simulations of a Joule-heating-based self-alignment method for the passivation layer. The Joule heating model was divided into two sub-models: a current model to study current distribution on grid scale during Joule heating, and thermoelectric model to study heat transfer in the system. Grid design rules – minimum line pitch and the geometry of the grid – necessary for a successful Joule heating process were studied. The line group design was found to be the best option for a current distribution grid. The minimum line pitch limited by heat transfer was 0.8 mm on an indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrate. With the line group design, maximum luminance output was achieved with a pitch of 4 mm, when the sheet resistance of the metal lines was 0.01 Ω / □ . This fulfils the demands placed by the Joule heating process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Green IT and Sustainability · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. White organic light-emitting diodes with fluorescent tube efficiency10.1038/nature08003 ↗
2. Organic light-emitting-diode lighting overview10.1117/1.3529412 ↗
3. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
4. Inhomogeneous luminance in organic light emitting diodes related to electrode resistivity10.1063/1.2390552 ↗
5. Investigation of large-area OLED devices with various grid geometries10.1016/j.orgel.2013.06.003 ↗
6. Self-alignment method for solution-processable dielectric structures via Joule heating10.1016/j.tsf.2011.04.109 ↗
7. Applications of manifolds: mesh generation10.1049/iet-smt:20070101 ↗
8. Modelling of Joule heating based self-alignment method for metal grid line passivation
9. Conductor grid optimization for luminance loss reduction in organic light emitting diodes10.1063/1.2907960 ↗
10. Heat conduction in a symmetric body subjected to a current flow of symmetric input and output10.1016/j.ijthermalsci.2008.03.005 ↗
11. Özisik · 2013
12. Brandrup · 1999 · vol. 1999
13. A microstructure for thermal conductivity measurement of conductive thin films10.1016/j.mee.2010.12.119 ↗
14. Thermoelectric performance of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)10.1088/0256-307X/25/6/076 ↗
15. Analytical model for current distribution in large-area organic light emitting diodes with parallel metal grid lines10.1063/1.4749419 ↗