Efficient hydrogen generation from the NaBH4 methanolysis by waste material: banana peel

The aim and originality of our current study are to use the original biomass (activated carbon) obtained by functionalizing waste banana peels (commonly found in Turkey) with acid in NaBH4 methanolysis and to examine its contribution to the hydrogen generation rate (HGR). Our study consisted of three stages. In the first stage, the optimum conditions were determined by examining the catalyst under parameters such as different acid types, different carbonization temperatures, and different carbonization times. Thus, based on the maximum HGR value, the optimum conditions were determined as H3PO4, 600 degrees C, and 40 min. In the second step, the effects of parameters such as acid concentration, NaBH4 concentration, catalyst amount, and temperature on HGR were investigated. As a result of methanolysis experiments (condition: catalyst amount: 100 mg, acid amount: 30%, NaBH4 concentration: 2.5%, temperature: 30 degrees C, carbonization temperature: 400 degrees C, and carbonization time: 40 min.), the maximum HGR value, the reaction completion time and activation energy were found as 65,625 mLmin(-1)gcat(-1), 0.233 min, and 4.56 kJ/mol, respectively. It was observed that the obtained activation energy was lower than that of some catalysts available in the literature. In addition, the structural and morphological examination of the banana peel (catalyst) with high HGR and low activation energy revealed that the acid functionalization process was successfully carried out.