journal article·2021-04

Morphology optimization of organic solar cells enabled by interface engineering of zinc oxide layer with a conjugated organic material

Lulu Yang, Jiake Wang, Xi Lu, Hui Lin, Xiaoyang Du, Zhenhua Chen, Silu Tao

Publisher page

Abstract

Abstract A diphenylphosphine-oxide-based conjugated organic molecule, ((1,3,5-triazine-2,4,6-triyl)tris(benzene-3,1-diyl))tris(diphenylphosphine oxide) (PO-T2T), was doped into ZnO to improve the characteristics of the electron transport layer (ETL) in inverted organic solar cells (OSCs). A series of characterization techniques were carried out to demonstrate the function of PO-T2T in film aspect, including transmittance, atomic force microscopy (AFM), transmission electron microscopy (TEM), water contact angle and grazing incidence wide angle X-ray scattering (GIWAXS). Light dependent, space-charge-limited current, exciton dissociation possibility were aimed to explore the influence of PO-T2T for internal carrier behaviors based on PTB7-Th: PC71BM system. It's found that the PO-T2T doped ETLs played a role in morphology optimization of ETL and undermined the trap-assistant recombination through filling the defects ZnO itself had, simultaneously. Besides, the electron mobility was also improved. With the optimized functionalities, the OSCs' efficiency based on fullerene system Poly[4,8- bis(5-(2-Ethylhexyl)thiophen-2-yl) benzo [1,2-b:4,5-b′] dithiophene-co-3-fluorothieno [3,4-b] thiophene-2-carboxylate] (PTB7-Th): [6,6]-Phenyl C71 butyric acid methyl ester (PC71BM) was improved from 9.03% to 9.84%. Finally, when this strategy was applied into another hot-topic system, poly((2,6-(4,8-bis(5-(2-ethylhexyl-3- fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene))-alt-(5,5- (1′,3′-di-2-thienyl)-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′] dithiophene-4,8-dione)) (PBDB-TF):2,2′-((2Z,2′Z)-((12,13-bis(2- ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e] thieno[2,″3″:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2-g]thieno[2′,3′:4,5] thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6), a high PCE of 16.34% was obtained. These results demonstrated that the PO-T2T had a positive role in OSC performance improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells10.1038/s41528-017-0017-6 ↗
2. Reproducible, high performance fully printed photodiodes on flexible substrates through the use of a polyethylenimine interlayer10.1021/acsami.8b07542 ↗
3. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
4. Efficiency enhancements in non-fullerene acceptor-based organic solar cells by post-additive soaking10.1039/C9TA00468H ↗
5. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
6. Interfacial engineering and optical coupling for multicolored semitransparent inverted organic photovoltaics with a record efficiency of over 12%10.1039/C9TA05789G ↗
7. Phosphonate-functionalized donor polymer as an underlying interlayer to improve active layer morphology in polymer solar cells10.1021/ma5008754 ↗
8. Single-junction organic solar cell containing a fluorinated heptacyclic carbazole-based ladder-type Acceptor affords over 13% efficiency with solution-processed cross-linkable fullerene as an interfacial layer10.1021/acsami.9b09044 ↗
9. Suppressing the photocatalytic activity of zinc oxide electron-transport layer in nonfullerene organic solar cells with a pyrene-bodipy interlayer10.1021/acsami.0c03147 ↗
10. A facile route to inverted polymer solar cells using a precursor based zinc oxide electron transport layer10.1016/j.orgel.2010.06.002 ↗
11. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
12. Controlled defects and enhanced electronic extraction in fluorine-incorporated zinc oxide for high-performance planar perovskite solar cells10.1016/j.solmat.2018.03.047 ↗
13. Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years10.1016/j.scib.2019.10.019 ↗
14. Efficient non-fullerene organic solar cells based on thickness-insensitive conjugated small molecule cathode interface10.1016/j.solener.2019.08.009 ↗
15. Highly stable and efficient inverted organic solar cells based on low-temperature solution-processed PEIE and ZnO bilayers10.1039/C6TA00957C ↗
16. Small molecule interlayers in organic solar cells
17. PEIE doped ZnO as a tunable cathode interlayer for efficient polymer solar cells10.1016/j.apsusc.2018.11.166 ↗
18. Roles of polyethylenimine ethoxylated in efficiently tuning the thermoelectric performance of poly(3,4-ethylenedioxythiophene)-rich nanocrystal films10.1021/acsami.9b00298 ↗
19. The first tandem, all-exciplex-based WOLED10.1038/srep05161 ↗
20. Triazine-phosphine oxide electron transporter for ultralow-voltage-driven sky blue PHOLEDs10.1039/C4TC02993C ↗
21. Yang · 2020
22. 14.7% efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
23. Effect of ZnO electron extraction layer on charge recombination and collection properties in organic solar cells10.1021/acsaem.9b01383 ↗
24. 13.9% efficiency ternary nonfullerene organic solar cells featuring low-structural order10.1021/acsenergylett.9b01630 ↗
25. Delayed fluorescence emitter enables near 17% efficiency ternary organic solar cells with enhanced storage stability and reduced recombination energy loss10.1002/adfm.201909837 ↗
26. Tailoring and modifying an organic electron acceptor toward the cathode interlayer for highly efficient organic solar cells10.1002/adma.201906557 ↗
27. Solution processable small molecules as efficient electron transport layers in organic optoelectronic devices10.1039/D0TA04802J ↗
28. Hydrogen bond induced green solvent processed high performance ternary organic solar cells with good tolerance on film thickness and blend ratios10.1002/adfm.201902078 ↗
29. A cross-linkable donor polymer as the underlying layer to tune the active layer morphology of polymer solar cells10.1002/adfm.201503833 ↗
30. Facile method of solvent-flushing to building component distribution within photoactive layers for high-performance organic solar cells10.1021/acsami.0c07173 ↗
31. A general approach for lab-to-manufacturing translation on flexible organic solar cells10.1002/adma.201903649 ↗