journal article·2020-11

Significant increase in current density of inverted polymer solar cells by induced-crystallization of sol-gel ZnO embedded with ZnO-NP

Jen-Hao Tsai, Ming-Chia Tsai, Cheng-Ying Sung, Ping-Tsung Huang

Publisher page

Abstract

Abstract Performance of the inverted polymer solar cells using sol-gel ZnO as cathode buffer layer is significantly improved by addition of 10 wt% crystalline ZnO nano particles (ZnO-NP) to the sol-gel ZnO. Power conversion efficiency (η) of the inverted polymer solar cells using P3HT/PC60BM as a model active layer increases over 30% from 3.73% with the pristine sol-gel ZnO buffer layer to 4.91% (ηmax = 5.0%) with the modified sol-gel ZnO buffer layer. Crystalline ZnO-NP acts as a nucleation agent inducing crystallization of sol-gel ZnO at 200 °C that increases crystallinity and carrier mobility of ZnO buffer layer. Crystal size of ZnO increases from amorphous of the pristine sol-gel ZnO to 11 nm of the modified sol-gel ZnO. The increase in crystallinity of ZnO leads to a decrease in resistivity of the ZnO buffer layer and a decrease in the series resistance of the fabricated device, which leads to performance improvement of the inverted polymer solar cells. By using this concept, it is possible to prepare inverted flexible polymer solar cells with improved device performance at low processing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Single-Junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
2. Solvent additive-free ternary polymer solar cells with 16.27% efficiency10.1016/j.scib.2019.03.024 ↗
3. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
4. 16.67% Rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
5. Achieving over 15% Efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
6. High-performance conjugated polymer donor materials for polymer solar cells with narrow bandgap nonfullerene acceptors10.1039/C9EE02531F ↗
7. Chlorination strategy on polymer donors toward efficient solar conversions10.1016/j.jechem.2019.04.002 ↗
8. Diketopyrrolopyrrole-based conjugated materials for non-fullerene organic solar cells10.1039/C9TA01976F ↗
9. A new acceptor for highly efficient organic solar cells10.1016/j.joule.2019.03.027 ↗
10. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
11. Organic polymeric and small molecular electron acceptors for organic solar cells
12. Recent progress on non-fullerene acceptors for organic photovoltaics10.1016/j.mattod.2018.09.004 ↗
13. Quenching to the percolation threshold in organic solar cells10.1016/j.joule.2018.11.006 ↗
14. Miscibility-driven optimization of nanostructures in ternary organic solar cells using non-fullerene acceptors10.1016/j.joule.2018.02.010 ↗
15. Nonhalogen solvent-processed asymmetric wide-bandgap polymers for nonfullerene organic solar cells with over 10% efficiency10.1002/adfm.201706517 ↗
16. Morphology control in organic solar cells10.1002/aenm.201703147 ↗
17. Recent advances in morphology optimization for organic photovoltaics10.1002/adma.201800453 ↗
18. Fabrications and applications of ZnO nanomaterials in flexible functional devices-a review10.1080/10408347.2018.1531691 ↗
19. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
20. Surface structure modification of ZnO and the impact on electronic properties10.1002/adma.201503404 ↗
21. Solution-processed metal oxides as efficient carrier transport layers for organic photovoltaics10.1002/smll.201502258 ↗
22. Recent progress and perspective in solution processed interfacial materials for efficient and stable polymer and organometal perovskite solar cells, Energy
23. ZnO cathode buffer layers for inverted polymer solar cells, Energy
24. Influences of surface roughness of ZnO electron transport layer on the photovoltaic performance of organic inverted solar cells10.1021/jp308480u ↗
25. Effect of different solvents on the structural and optical properties of zinc oxide thin films for optoelectronic applications10.1016/j.ceramint.2013.06.065 ↗
26. Effect of annealing parameters on optoelectronic properties of highly ordered ZnO thin films10.1016/j.mssp.2019.04.032 ↗
27. Mol., Effect of sol-gel prepared ZnO electron selective layer on the performance of inverted organic solar cells10.1080/15421406.2011.563714 ↗
28. Nanoscale roughness control of electron transport layer in organic solar cells fabricated by sol-gel method10.1143/JJAP.51.095803 ↗
29. Improving the performance of ITO/ZnO/P3HT:PCBM/Ag solar cells by tuning the surface roughness of sprayed ZnO10.1016/j.solener.2015.06.037 ↗
30. ZnO-morphology-dependent effects on the photovoltaic performance for inverted polymer solar cells10.1016/j.solmat.2017.04.046 ↗
31. Brabec · 2008
32. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
33. Thermal degradation mechanisms of PEDOT:PSS10.1016/j.orgel.2008.10.008 ↗
34. Role of ITO and PEDOT:PSS in stability/degradation of polymer: fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
35. Influence of controlled acidity of hole-collecting buffer layers on the performance and lifetime of polymer:fullerene solar cells10.1021/jp2028615 ↗
36. Degradation of a thin Ag layer induced by poly(3,4-ethylenedioxy thiophene):polystyrene sulfonate in a transmission electron microscopy specimen of an inverted polymer solar cell10.1021/am301818z ↗
37. Direct observation of hole accumulation in polymer solar cells during device operation using light-induced electron spin resonance10.1002/adma.201204015 ↗
38. The photo-stability of polymer solar cells: contact photo-degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
39. Investigating electrodes degradation in organic photovoltaics through reverse engineering under accelerated humidity lifetime conditions10.1016/j.solmat.2014.07.051 ↗
40. Interface engineering to enhance the efficiency of conventional polymer solar cells by alcohol-/water-soluble C60 materials doped with alkali carbonates10.1021/am500336s ↗
41. ESR study of degradation mechanism due to charge formation in polymer solar cells10.2494/photopolymer.29.541 ↗
42. Influence of perfluorinated ionomer in PEDOT:PSS on the rectification and degradation of organic photovoltaic cells10.1039/C8TA04098B ↗
43. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
44. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
45. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
46. Inverted organic photovoltaic cells10.1039/C5CS00831J ↗
47. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
48. Development of preparation of the functional thin films by pulsed laser deposition10.1142/S0218625X05007487 ↗
49. Pulse laser deposited nanostructured ZnO thin films: a review10.1166/jnn.2014.9120 ↗
50. Magnetron sputtering of transparent conductive zinc oxide: relation between the sputtering parameters and the electronic properties10.1088/0022-3727/33/4/201 ↗
51. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cells10.1021/jp106641j ↗
52. Synthesis of doped, ternary, and quaternary materials by atomic layer deposition: a review10.1021/acs.chemmater.8b02878 ↗
53. Solvothermal growth of ZnO10.1016/j.pcrysgrow.2006.09.002 ↗
54. Recent progress in piezoelectric thin film fabrication via the solvothermal process10.1039/C9TA04863D ↗
55. Progress of study on ZnO thin film and it's properties
56. Recent advances in atmospheric vapor-phase deposition of transparent and conductive zinc oxide10.1002/cvde.201400056 ↗
57. ZnO nano-ridge structure and its application in inverted polymer solar cell10.1016/j.orgel.2009.08.011 ↗
58. Inverted polymer solar cells with a low-temperature ramp annealed sol-gel derived aluminum-doped ZnO nano-ridge film as a cathode buffer layer10.1016/j.cplett.2013.12.024 ↗
59. High efficiency PTB7-based inverted organic photovoltaics on nano-ridged and planar zinc oxide electron transport layers10.1039/C5TA00400D ↗
60. Nano ZnO thin films synthesis by sol–gel spin coating method as a transparent layer for solar cell applications10.1007/s10971-016-4277-8 ↗
61. Characterizations of multilayer ZnO thin films deposited by sol-gel spin coating technique
62. Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer10.1016/j.orgel.2011.05.027 ↗
63. Improved inverted organic solar cells with a sol-gel derived indium-doped zinc oxide buffer layer10.1109/JSTQE.2009.2039200 ↗
64. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
65. Annealing temperature dependence of optical properties of sol-gel ZnO thin films with different sol aging time10.4028/www.scientific.net/JNanoR.48.211 ↗
66. Influence of precursor concentration and annealing treatment on the structural and optical properties of sol-gel ZnO thin films
67. Influence of the deposition temperature on the physical properties of high electron mobility ZnO films by sol-gel process10.1016/j.jallcom.2015.04.167 ↗
68. Correlating annealing temperature of ZnO nanoparticle electron transport layer with performance of inverted polymer solar cells10.1007/s00289-018-2279-0 ↗
69. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure10.1021/jp1003984 ↗
70. Effect of solvents on sol-gel spin-coated nanostructured Al-doped ZnO thin films: a film for key optoelectronic applications10.1007/s00339-017-1426-z ↗