journal article·2019-07

Quantitative assessment by local probe methods of the mechanical and electrical properties of inkjet-printed PEDOT:PSS thin films over Indium Tin Oxide substrates

E. Gutiérrez-Fernández, I.A. Gabaldón-Saucedo, M.C. García-Gutiérrez, A. Varea, A. Nogales, E. Rebollar, A. Vilà, T.A. Ezquerra, A. Cirera

Publisher page

Abstract

Thin films of Poly(3,4-ethylenedioxythiophene)complexed with Poly(styrenesulfonate)(PEDOT:PSS)on Indium Tin Oxide (ITO)have been prepared by inkjet printing technology. The process allows obtaining thin films over large areas. A relatively broad range of thicknesses can be obtained by the addition of subsequent polymer layers resembling an additive manufacturing process. The resulting inkjet PEDOT:PSS films are homogeneous as regard both electrical and mechanical properties. In spite of the characteristic parallel line topography of these inkjet printed films, both the Quantitative Nanomechanical Mapping (QNM)and the Conductive-Atomic Force Microscope (C-AFM)characterization reveal homogeneous values throughout the polymer surface regardless of the welding zones. The results discussed in this work provide the basis for the application of inkjet printing as deposition method for electrically conducting PEDOT:PSS into a large area with mechanical stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A review on 3D micro-additive manufacturing technologies10.1007/s00170-012-4605-2 ↗
2. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
3. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
4. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
5. Inkjet printed electrochemical organic electronics10.1016/j.synthmet.2008.03.030 ↗
6. Electrical characteristics of ink-jet printed, all-polymer electrochemical transistors10.1016/j.orgel.2011.11.010 ↗
7. Inkjet printed organic electrochemical transistors with highly conducting polymer electrolytes10.1063/1.4966651 ↗
8. Inkjet-printed resistors with a wide resistance range for printed read-only memory applications10.1016/j.orgel.2012.12.034 ↗
9. Low-cost and flexible printed graphene-PEDOT:PSS gas sensor for ammonia detection10.1016/j.orgel.2014.08.044 ↗
10. Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing10.1016/j.sna.2016.03.021 ↗
11. Mechanical characterization of PEDOT:PSS thin films10.1016/j.synthmet.2008.11.005 ↗
12. Ultra-thin conductive free-standing PEDOT/PSS nanofilms10.1039/c1sm06174g ↗
13. J. Dual, microscopical investigations of PEDOT:PSS thin films10.1002/adfm.200801258 ↗
14. Dynamic assembly of electrically conductive PEDOT:PSS nanofibers in electrospinning process studied by high speed video10.1016/j.synthmet.2015.02.018 ↗
15. Modification of the sheet resistance of ink jet printed polymer conducting films by changing the plastic substrate10.1016/j.mseb.2004.11.026 ↗
16. The crystallization of PEDOT:PSS polymeric electrodes probed in situ during printing10.1002/adma.201500315 ↗
17. A comparative assessment of surface microstructure and electrical conductivity dependence on co-solvent addition in spin coated and inkjet printed poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS)10.1016/j.orgel.2011.11.011 ↗
18. Life cycle analysis of organic photovoltaic technologies10.1002/pip.967 ↗
19. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
20. Laser-induced periodic surface structures on P3HT and on its photovoltaic blend with PC71BM10.1021/acsami.6b09053 ↗
21. Mechanical strength of welding zones produced by material extrusion additive manufacturing
22. Vancso · 2010
23. Laser-induced periodic surface structures on conjugated polymers: poly(3-hexylthiophene)10.1021/acs.macromol.5b00804 ↗
24. Quantitative mapping of mechanical properties in polylactic acid/natural rubber/organoclay bionanocomposites as revealed by nanoindentation with atomic force microscopy10.1016/j.compscitech.2014.08.030 ↗
25. Broadband nanodielectric spectroscopy by means of amplitude modulation electrostatic force microscopy (AM-EFM)10.1016/j.ultramic.2011.05.001 ↗
26. Laser fabrication of polymer ferroelectric nanostructures for nonvolatile organic memory devices10.1021/acsami.5b05213 ↗
27. Improving information density in ferroelectric polymer films by using nanoimprinted gratings10.1063/1.4804427 ↗
28. H. Schönherr, G. Vancso, Scanning Force Microscopy of Polymers, Springer, Heidelberg.
29. Quantitative mapping of the elastic modulus of soft materials with HarmoniX and peak force QNM AFM modes10.1021/la302706b ↗
30. Fabrication and mechanical characterization of semi-free-standing (conjugated) polymer thin films10.1021/la4032267 ↗
31. Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity10.1021/ma502099t ↗
32. Nanomechanical properties of alpha-synuclein amyloid fibrils: a comparative study by nanoindentation, harmonic force microscopy, and Peakforce QNM10.1186/1556-276X-6-270 ↗
33. Mechanical mapping of nanobubbles by PeakForce atomic force microscopy10.1039/c3sm50942g ↗
34. EFFECT OF CONTACT DEFORMATIONS ON ADHESION OF PARTICLES10.1016/0021-9797(75)90018-1 ↗
35. Recent experiments on a combined small-angle/wide-angle X-ray scattering beam line at the ESRF10.1107/S002188980300400X ↗
36. In situ monitoring of laser-induced periodic surface structures formation on polymer films by grazing incidence small-angle X-ray scattering10.1021/acs.langmuir.5b00285 ↗
37. Hammersley
38. Grazing incidence X-ray scattering study of sol-gel derived indium tin oxide thin films10.1016/j.tsf.2009.03.047 ↗
39. Controlling the surface composition of poly(3,4-ethylene dioxythiophene)poly(styrene sulfonate) blends by heat treatment10.1002/adma.200306487 ↗
40. Aggregation control in natural brush-printed conjugated polymer films and implications for enhancing charge transport10.1073/pnas.1713634114 ↗
41. Role of interchain coupling in the metallic state of conducting polymers10.1103/PhysRevLett.109.106405 ↗
42. Metallic behaviour of acid doped highly conductive polymers10.1039/C4SC02463J ↗
43. Elastic moduli of organic electronic materials by the buckling method10.1021/ma900137k ↗
44. Mechanical properties of the intrinsically conductive polymer poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT/PSS)
45. Spinning and characterization of conducting microfibers10.1002/marc.200390038 ↗
46. Mechanical characterization of polyelectrolyte multilayers using quasi-static nanoindentation10.1021/ma049777t ↗
47. Microscopic understanding of the anisotropic conductivity of PEDOT : PSS thin films10.1002/adma.200602575 ↗