journal article·2014-03

Atmospheric plasma deposition of transparent semiconducting ZnO films on plastics in ambient air

Makoto Watanabe, Linying Cui, Reinhold H. Dauskardt

Organic Electronics· Volume 15· Issue 3
Publisher page

Abstract

Abstract Transparent zinc oxide (ZnO) thin films have been successfully synthesized on poly (methyl methacrylate) (PMMA), polycarbonate (PC), and polyethylene terephthalate (PET) substrates by atmospheric plasma deposition in ambient air at room temperature. The structural, optical and electrical properties of the ZnO films as well as their adhesion to the polymer substrates were investigated for various deposition conditions. The film surface exhibited a dome-shaped topography comprised of nanometer-sized grains. The size of both the domes and the grains became larger as the plasma power increased. The visible transmittance increased above 95% with decreasing plasma power. The resistivity exhibited a wide variation in the range of 10 2 –10 8 ohm cm. The adhesion energies to PMMA varied from 0.2 to 1.5 J/m 2 with increasing plasma power. While a finer grain structure achieved with lower plasma power was preferable for higher transmittance, it resulted in lower adhesion to the plastic substrates. The study demonstrated the feasibility of depositing semiconducting transparent ZnO films on polymer substrates at low temperature in ambient air using atmospheric plasma deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Transparent conductors: a status review10.1016/0040-6090(83)90256-0 ↗
2. A comprehensive review of ZnO materials and devices10.1063/1.1992666 ↗
3. Low-temperature deposition of ZnO thin films on PET and glass substrates by DC-sputtering technique10.1016/j.tsf.2005.08.258 ↗
4. Preparation of transparent conducting ZnO:Al films on polymer substrates by r. f. magnetron sputtering10.1016/S0169-4332(99)00591-7 ↗
5. Structural, electrical and optical properties of ZnO:Al films deposited on flexible organic substrates for solar cell applications10.1016/j.tsf.2006.12.099 ↗
6. Transparent conductive ZnO:Al thin films deposited on flexible substrates prepared by direct current magnetron sputtering10.1016/j.tsf.2005.09.110 ↗
7. Transparent conducting ZnO films on polymer substrates by pulsed laser deposition10.4028/www.scientific.net/KEM.270-273.878 ↗
8. Growth conditions for wurtzite zinc oxide films in aqueous solutions10.1039/b205384e ↗
9. Understanding the factors that govern the deposition and morphology of thin films of ZnO from aqueous solution10.1039/B404784B ↗
10. Atmospheric plasmas for thin film deposition: a critical review10.1016/j.tsf.2012.01.026 ↗
11. Deposition of ZnO film using an open-air cold plasma generator10.1016/j.tsf.2005.08.166 ↗
12. Study of plasma enhanced chemical vapor deposition of ZnO films by non-thermal plasma jet at atmospheric pressure10.1016/j.tsf.2009.11.034 ↗
13. Deposition of the ZnO transparent electrodes at atmospheric pressure using a DC Arc Plasmatron10.1016/j.tsf.2010.02.072 ↗
14. Plasma-enhanced chemical vapor deposition of zinc oxide at atmospheric pressure and low temperature10.1016/j.solmat.2007.02.009 ↗
15. Industrial high-rate (similar to 14 nm/s) deposition of low resistive and transparent ZnOx:Al films on glass10.1016/j.solmat.2011.01.007 ↗
16. Growth of ZnOx:Al by high-throughput CVD at atmospheric pressure10.1016/j.jcrysgro.2012.03.007 ↗
17. High rate (∼7 nm/s), atmospheric pressure deposition of ZnO front electrode for Cu(In, Ga)Se2 thin-film solar cells with efficiency beyond 15%10.1002/pip.2423 ↗
18. Vapor pressure of metal organic precursors10.1016/S0022-0248(02)01840-7 ↗
19. Atmospheric plasma deposited dense silica coatings on plastics10.1021/am301723d ↗
20. Properties of zinc oxide films prepared by the oxidation of diethyl zinc10.1063/1.328618 ↗
21. Adhesion and debonding of multi-layer thin film structures10.1016/S0013-7944(98)00052-6 ↗
22. Fracture properties of hydrogenated amorphous silicon carbide thin films10.1016/j.actamat.2011.10.014 ↗
23. An augmented double cantilever beam model for studying crack propagation and arrest10.1007/BF00035958 ↗
24. Mechanisms of reactions of diethylzinc with isopropanol and water10.1139/v63-187 ↗
25. Smith · Thin-film deposition: principles and practice · 1995
26. Transparent conducting ZnO:Al, In and Sn thin films deposited by the sol–gel method10.1016/S0040-6090(03)00014-2 ↗
27. Structural, electrical, and optical properties of hydrogen-doped ZnO films10.1103/PhysRevB.86.115334 ↗
28. Hydrogen as a cause of doping in zinc oxide10.1103/PhysRevLett.85.1012 ↗
29. Infrared detection of hydrogen-generated free carriers in polycrystalline ZnO thin films10.1063/1.1851599 ↗
30. Defects in ZnO10.1063/1.3216464 ↗
31. Highly tunable electrical properties in undoped ZnO grown by plasma enhanced thermal-atomic layer deposition10.1021/am300458q ↗
32. Transparent ZnO thin-film transistor fabricated by rf magnetron sputtering10.1063/1.1553997 ↗
33. Improved adhesion of dense silica coatings on polymers by atmospheric plasma pretreatment10.1021/am401921k ↗