Improved mechanical properties of Al2O3/acrylic laminates for flexible thin film encapsulation by introducing wavy interfaces
Source abstract
Abstract
Thin film encapsulation (TFE) with high barrier performance and mechanical reliability is essential and challenging for the reliable operation of flexible organic light-emitting diodes (OLEDs). To break the trade-off relationship between high flexibility and low permeability, this work proposed an Al 2O 3 /acrylic multi-layered structure with wavy stacking interfaces to reduce the tensile strain of the brittle Al 2O 3 film under bending. It was found from simulation analysis that 3-dyad wavy Al 2O 3 /acrylic multi-layered structures with periods in the ranges of 500–1500 nm and amplitudes in the ranges of 600–1600 nm were preferred due to a smaller maximum stress under bending. A novel approach to generate wavy structures with controllable periods and amplitudes was proposed by combining argon plasma treatment and soft-lithography. The findings suggest that the water vapor transmission rate (WVTR) of a 3-dyad wavy Al 2O 3/acrylic multi-layer was 3.18 × 10 −5 g/m 2 /day after 100-iteration bending with the bending radius of 1 cm, corresponding to the tensile strain exceeding 1.09%. The lifetime of OLED encapsulated using corresponding Al 2O 3/acrylic multi-layers with wavy structures and under the same bending condition was around 50 h, showing a 40% increase compared to that without wavy structures. The wavy structures can improve the mechanical properties of Al 2O 3/acrylic remarkably.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Organic Light-Emitting Diodes Research · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Physical characterization of Ag:WO3 cermet films used as top electrode for stable and high contrast organic light-emitting diodes
2. Intrinsically anti-freezing and anti-dehydration hydrogel for multifunctional wearable sensors10.1007/s40843-021-2005-2 ↗
3. A review on encapsulation technology from organic light emitting diodes to organic and perovskite solar cells
4. Fabrication of cylindrical microlens array using rotatable multi-arrayed needle coating module for light out-coupling of OLEDs10.1016/j.orgel.2021.106387 ↗
5. Printable transistors: printable semiconductors for backplane TFTs of flexible OLED displays
6. A substrateless, flexible, and water-resistant organic light-emitting diode10.1038/s41467-020-20016-3 ↗
7. Recent developments in flexible organic light-emitting devices10.1002/admt.201800371 ↗
8. Novel donor-spacer-acceptor compound as the multifunctional component of exciplexes for efficient organic light-emitting diodes
9. Textile-based washable polymer solar cells for optoelectronic modules: toward self-powered smart clothing10.1039/C8EE03271H ↗
10. Enhanced light extraction from organic light emitting diodes using a flexible polymer-nanoparticle scattering layer
11. Low-temperature and corrosion-resistant gas diffusion multibarrier with UV and heat rejection capability—a strategy to ensure reliability of organic electronics10.1021/acsami.9b02268 ↗
12. Ultra gas-proof polymer hybrid thin layer10.1021/acs.nanolett.8b01855 ↗
13. Reliable high temperature, high humidity flexible thin film encapsulation using Al2O3/MgO nanolaminates for flexible OLEDs10.1007/s12274-020-2915-5 ↗
14. Solution-processed amorphous gallium-tin oxide thin film for low-voltage, high-performance transistors10.1007/s40843-018-9380-8 ↗
15. Accurate optical simulation method of tandem organic light-emitting diode with consideration of Purcell effect10.1016/j.orgel.2021.106192 ↗
16. Efficient multi-barrier thin film encapsulation of OLED using alternating Al2O3 and polymer layers10.1039/C8RA00023A ↗
17. Hybrid multilayered films comprising organic monolayers and inorganic nanolayers for excellent flexible encapsulation films
18. Organic/inorganic hybrid thin-film encapsulation using inkjet printing and PEALD for industrial large-area process suitability and flexible OLED application10.1021/acsami.1c12253 ↗
19. Design of highly water resistant, impermeable, and flexible thin-film encapsulation based on inorganic/organic hybrid layers10.1021/acsami.8b11930 ↗
20. Wearable textile information displays: bright-multicolor, highly efficient, and addressable phosphorescent organic light-emitting fibers: toward wearable textile information displays
21. Design of ultrathin OLEDs having oxide-based transparent electrodes and encapsulation with sub-mm bending radius10.1016/j.orgel.2020.105704 ↗
22. A mechanically enhanced hybrid nano-stratified barrier with a defect suppression mechanism for highly reliable flexible OLEDs10.1039/C7NR01166K ↗
23. Functional design of highly robust and flexible thin-film encapsulation composed of quasi-perfect sublayers for transparent, flexible displays10.1021/acsami.7b14040 ↗
24. Improved barrier and mechanical properties of Al2O3/acrylic laminates using rugged fluorocarbon layers for flexible encapsulation
25. Effects of embedded SiO2 nanoparticles on the moisture barrier performance of inorganic/organic laminates10.1007/s10854-019-02478-4 ↗
26. Novel ytterbium Schiff base complex: toward efficient solution-processed NIR-emitting OLED
27. Selective infiltration in polymer hybrid thin films as a gas-encapsulation layer for stretchable electronics10.1021/acsami.9b19269 ↗
28. Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer10.1038/30193 ↗
29. Sulfur hexafluoride (SF6) plasma treatment of medical grade poly(methyl methacrylate)10.3390/coatings10020135 ↗
30. Folding stabilities of encapsulation layers at positions off the mechanical neutral plane
31. Atomistic insight into ideal strength, fracture toughness, deformation, and failure mechanisms of magnetocaloric Fe2AlB210.1111/jace.18544 ↗
32. Effect of Ultrasonic Nanocrystal Surface Modification on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy10.1016/j.msea.2017.11.043 ↗
33. Thermal properties of plasma-sprayed multilayer Al2O3/yttria-stabilized zirconia coating10.1166/jnn.2020.17271 ↗
34. Advanced thin gas barriers film incorporating alternating structure of PEALD-based Al 2 O 3/organic-inorganic nanohybrid layers[J]10.1016/j.apsusc.2018.12.296 ↗
35. Design and fabrication of bi-functional TiO2/Al2O3 nanolaminates with selected light extraction and reliable moisture vapor barrier performance10.1088/1361-6528/aaf4e1 ↗
36. Extremely high barrier performance of organic-inorganic nanolaminated thin films for organic light-emitting diodes10.1021/acsami.6b15404 ↗
37. Activated rate theory treatment of oxygen and water transport through silicon oxide/poly (ethylene terephthalate) composite barrier structures10.1021/jp9629856 ↗
38. Tailor-made nanostructures bridging chaos and order for highly efficient white organic light-emitting diodes10.1038/s41467-019-11032-z ↗
39. Spontaneously formed random corrugations for efficient light extraction enhancement in flexible organic light-emitting devices10.1016/j.orgel.2018.11.005 ↗
40. Deformation, failure and removal mechanisms of thin film structures in abrasive machining10.1007/s40436-016-0165-2 ↗
41. An X-ray photoelectron spectroscopic investigation into the chemical structure of deposits formed from hexamethyldisiloxane/oxygen plasmas10.1007/BF00372203 ↗
42. A study of the Si‐Au‐Ag interface by surface techniques10.1063/1.329312 ↗
43. Fingerprint‐inspired conducting hierarchical wrinkles for energy‐harvesting E‐skin10.1002/adfm.201903580 ↗
44. Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability10.1016/j.joule.2021.04.014 ↗
45. Photoluminescence enhancement of quantum dots with different emission wavelengths using oxide shell isolated Au nanoparticles10.1007/s10853-022-07169-w ↗
46. Effects of long-term static bending deformation on a barrier thin film for flexible organic optoelectronic devices10.3390/coatings8040127 ↗
47. Effects of cyclic deformation on a barrier thin film for flexible organic optoelectronic devices10.1016/j.tsf.2018.02.005 ↗