journal article·2022-11

Investigation of quantum dots light emitting diodes with different transition metal oxide as charge injection layers

Hsin-Chieh Yu, Qian-Hua Zhuo, Jing-Teng Shi, Kuei-Hung Chu

Organic Electronics· Volume 110
Publisher page

Abstract

In this paper, various transition metal oxides serve as charge injection layers being prepared by solution process for the fabrication of quantum dot light emitting diodes (QLEDs) is demonstrated. Magnesium doped zinc oxide (MgZnO) nanoparticles is used as electron injection and transport layer, copper oxide (CuO x ), nickel oxide (NiO x ), cobalt oxide (CoO x ) and molybdenum oxide (MoO x) are used as hole injection layer (HIL) for the comparison with Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate), PEDOT:PSS. The fabricated red QLEDs with PEDOT:PSS possess highest maximum luminance of 88,713 cd/m 2 and current efficiency of 4.96 cd/A, whereas QLEDs with MoO x and NiO x HILs demonstrate lower turn on voltage of 1.5V and 2.1V and maintain decent maximum luminance of 59,699 and 64,244 cd/m 2, respectively. The sub-bandgap turn-on voltage of QLED with MoO x can be attributed to thermal-assisted energy up-conversion effect due to its lower series resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · ZnO doping and properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Emergence of colloidal quantum-dot light-emitting technologies10.1038/nphoton.2012.328 ↗
2. High-performance quantum dot light-emitting diodes with hybrid hole transport layer via doping engineering10.1364/OE.24.025955 ↗
3. The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives10.1039/C9MH01978B ↗
4. The effects of the PEDOT:PSS acidity on the performance and stability of P3HT:PCBM-based OSCs10.1007/s10854-018-0055-4 ↗
5. Blocking reactions between indium-tin oxide and poly (3, 4-ethylene dioxythiophene): poly (styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
6. Colloidal quantum-dot light-emitting diodes with metal-oxide charge transport layers10.1038/nphoton.2008.34 ↗
7. Nickel oxide hole injection/transport layers for efficient solution-processed organic light-emitting diodes10.1021/cm501898y ↗
8. Suppression of non-radiative recombination toward high efficiency perovskite light-emitting diodes10.1063/1.5064370 ↗
9. Solution-processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells10.1002/adfm.201202269 ↗
10. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
11. All-inorganic quantum-dot light-emitting devices formed via low-cost, wet-chemical processing10.1039/B905256A ↗
12. Al2O3-Interlayer-Enhanced performance of all-inorganic silicon-quantum-dot near-infrared light-emitting diodes10.1109/TED.2017.2782772 ↗
13. PVP inorganic–organic hybrid electron transport layer: towards efficient bottom-emission and transparent quantum dot light-emitting diodes10.1039/C8TC06121A ↗
14. Solution-processed, high-performance light-emitting diodes based on quantum dots10.1038/nature13829 ↗
15. Colloidal quantum-dot LEDs with a solution-processed copper oxide (CuO) hole injection layer10.1016/j.orgel.2015.07.044 ↗
16. Choy “Strategic synthesis of ultrasmall NiCo2O4 NPs as hole transport layer for highly efficient perovskite solar cells10.1002/aenm.201702722 ↗
17. Solution-processable MoOx for efficient light-emitting diodes based on giant quantum dots10.1109/LPT.2016.2578643 ↗
18. All-solution-processed high-performance quantum dot light emitting devices employing an inorganic thiocyanate as hole injection layer10.1016/j.orgel.2019.04.037 ↗
19. High-efficiency light-emitting devices based on quantum dots with tailored nanostructures10.1038/nphoton.2015.36 ↗
20. Electroluminescence from light-emitting polymer/ZnO nanoparticle heterojunctions at sub-bandgap voltages10.1016/j.nantod.2010.08.010 ↗
21. Thermal assisted up-conversion electroluminescence in quantum dot light emitting diodes10.1038/s41467-022-28037-w ↗
22. Solution-processed quantum dot light-emitting diodes based on NiO nanocrystals hole injection layer10.1016/j.orgel.2017.02.023 ↗
23. Highly efficient all-solution processed inverted quantum dots based light emitting diodes10.1021/acsnano.7b08129 ↗
24. Performance improvements in all-solution processed inverted QLEDs realized by inserting an electron blocking layer10.1088/1361-6528/abfe8e ↗
25. The effect of annealing treatment on microstructure and properties of indium tin oxides films10.1016/j.mseb.2006.01.012 ↗
26. 17% non-fullerene organic solar cells with annealing-free aqueous MoOx10.1002/advs.202002395 ↗