Stability improvement of inverted organic solar cells with thin organic protective layer
Source abstract
Abstract
Encapsulation is one of the methods to prevent organic devices from degradation. We design a facile, effective bilayer structure of ∼250 nm thick as protective layer for organic solar cells (OSCs). This bilayer structure is composed of a free-radical scavenging 3-Hydroxyflavone (3-HF) film underneath a hydrophobic polyvinylidene difluoride (PVDF) layer. Devices packaged with this 3-HF/PVDF bilayer show better storage stability and light-soaking stability than those with individual layer. As obtained, the power conversion efficiencies of packaged devices remain 96.1%, 86.5%, and 69.7% of their original values after two months storage in relative humidity environment of 20%, 50%, and 77% at room temperature, respectively. The result can be understood as the cooperative effect of water molecule repelling property of PVDF and oxygen elimination ability of 3-HF. The purposed idea can be generalized to other organic devices to extend their shelf life and serve as a design guideline for developing thin encapsulation materials for wearable technology with simple processing and good performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Organic solar cells with 18% efficiency enabled by an alloy acceptor: a two-in-one strategy
2. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
3. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
4. Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers10.1016/j.orgel.2013.07.016 ↗
5. Lifetimes of organic photovoltaics: combining chemical and physical characterization techniques to study degradation mechanisms
6. An overview of process and product requirements for next generation thin film electronics, advanced touch panel devices, and ultra high barriers10.1109/JPROC.2015.2408052 ↗
7. A review on emerging barrier materials and encapsulation strategies for flexible perovskite and organic photovoltaics10.1002/aenm.202101383 ↗
8. Ultra-slim flexible glass for roll-to-roll electronic device fabrication10.1007/s00339-014-8468-2 ↗
9. Transparent flexible ultra-low permeability encapsulation film: fusible glass fired on heat-resistant polyimide membrane10.1002/admi.202001170 ↗
10. Enhancing stability for organic-inorganic perovskite solar cells by atomic layer deposited Al2O3 encapsulation10.1016/j.solmat.2018.08.016 ↗
11. Versatile perovskite solar cell encapsulation by low-temperature ALD-Al2O3 with long-term stability improvement10.1039/C8SE00282G ↗
12. ALD Al2O3 on hybrid perovskite solar cells: unveiling the growth mechanism and long-term stability10.1016/j.solmat.2019.110289 ↗
13. Gas barrier properties of solution processed composite multilayer structures for organic solar cells encapsulation10.1016/j.solmat.2013.03.033 ↗
14. Thin film encapsulation of organic solar cells by direct deposition of polysilazanes from solution10.1002/aenm.201900598 ↗
15. Interfacial engineering in solution processing of silicon-based hybrid multilayer for high performance thin film encapsulation10.1021/acsami.9b14994 ↗
16. Design of highly water resistant, impermeable, and flexible thin-film encapsulation based on inorganic/organic hybrid layers10.1021/acsami.8b11930 ↗
17. Modeling the barrier properties of polymer-layered silicate nanocomposites10.1021/ma010780b ↗
18. Synthesis and characterization of flexible epoxy nanocomposites reinforced with amine functionalized aluminananoparticles: a potential encapsulant for organic devices10.1039/C0PY00270D ↗
19. Solution processed PVB/mica flake coatings for the encapsulation of organic solar cells10.3390/ma14102496 ↗
20. Rice-Evans · 2003
21. Packer · 1999
22. Packer · 2001
23. Arnoldi · 2004
24. The contribution of flavonoid C-ring on the DPPH free radical scavenging efficiency. A kinetic approach for the 3’,4’-hydroxy substituted members10.1016/j.ifset.2005.09.001 ↗
25. Reduction potentials of flavonoid and model phenoxyl radicals. Which ring in flavonoids is responsible for antioxidant Activity ?10.1039/p29960002497 ↗
26. Highly flexible and transparent conducting silver nanowire/ZnO composite film for organic solar cells10.1007/s12274-014-0502-3 ↗
27. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
28. Lifetime of organic photovoltaics: status and predictions10.1002/aenm.201501208 ↗
29. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
30. Outdoor operational stability of indium-free flexible polymer solar modules over 1 year studied in India, Holland, and Denmark10.1002/adem.201400002 ↗
31. Mechanical properties of organic semiconductors for stretchable, highly flexible, and mechanically robust electronics10.1021/acs.chemrev.7b00003 ↗
32. Wearable organic solar cells with high cyclic bending stability: materials selection criteria10.1016/j.solmat.2015.09.049 ↗
33. Efficient and mechanically robust ultraflexible organic solar cells based on mixed acceptors10.1016/j.joule.2019.10.007 ↗
34. Toward fully flexible multilayer moisture-barriers for organic light-emitting diodes10.1063/1.4824689 ↗