Low-temperature cross-linkable hole transporting materials through chemical doping for solution-processed green PHOLEDs
Source abstract
Abstract
Abstract Since the inter-layer mutual solubility is an obstacle to the development of solution-processed OLED, cross-linking is considered to be the best method to obtain solvent resistance. Vinyl is the most widely reported crosslinking group, but a problem raised that crosslinking usually need a high temperature. Here, two vinyl-crosslinked hole transporting materials, 3,3'-(1,3,4-oxadiazole-2,5-diyl)bis (N-phenyl-N-(4-vinylphenyl)aniline) (OXZ-VPAN), 3,3'-(4-phenyl-4H-1,2,4-triazole-3,5-diyl)bis (N-phenyl-N-(4-vinylphenyl)aniline) (TRZ-VPAN) were designed and synthesized. The introduction of pentaerythritol tetra(3-mercaptopropionate) (PETMP) and vinyl groups by thiol-ene reaction to reduce the crosslinking temperature. As a result, crosslinking can be achieved at 120 °C with the solvent resistance higher than 99%. The surface morphology of the films before and after crosslinking were characterized by atomic force microscope, and it was found that the roughness of the film was improved after dopped with PETMP. The solution-processed green phosphorescent OLEDs devices based on the obtained HTM exhibit excellent performance. Maximum current efficiency of 57.1 cd A−1 and external quantum efficiency of 16.0% (Ir (mppy)3) are obtained when OXZ-VPAN served as HTL. This low temperature feasible cross-linking process to prepare HTLs promotes the development solution-processed OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. Electroluminescence in conjugated polymers10.1038/16393 ↗
3. Organic electroluminescent diodes10.1063/1.98799 ↗
4. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
5. Solution-processable naphthalene and phenyl substituted carbazole core based hole transporting materials for efficient organic light-emitting diodes10.1039/C7TC03049E ↗
6. Confinement of charge carriers and molecular excitons within 5‐nm‐thick emitter layer in organic electroluminescent devices with a double heterostructure10.1063/1.103638 ↗
7. Efficient multilayer electroluminescence devices with poly(m-phenylenevinylene-co-2,5-dioctyloxy-p-phenylenevinylene) as the emissive layer10.1063/1.366097 ↗
8. Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices10.1039/b907991m ↗
9. Imaging the interfaces of conjugated polymer optoelectronic devices10.1002/adma.200700887 ↗
10. meta - and para -Functionalized Thermally Crosslinkable OLED-Materials through Selective Transition-Metal-Catalyzed Cross-Coupling Reactions
11. Enabling high-efficiency organic light-emitting diodes with a cross-linkable electron confining hole transporting material10.1016/j.orgel.2015.06.003 ↗
12. Efficient electron injection from a bilayer cathode consisting of aluminum and alcohol-/water-soluble conjugated polymers10.1002/adma.200400067 ↗
13. Efficient electron injection from bilayer cathode consisting of aluminum and alcohol/wateroluble conjugated polymers10.1889/1.2012594 ↗
14. Multilayer polymer light-emitting diodes: White-light emission with high efficiency10.1002/adma.200500727 ↗
15. Approaches to solution-processed multilayer organic light-emitting diodes based on cross-linking10.1021/cm102401k ↗
16. Solution-processed thermally activated delayed fluorescent OLED with high EQE as 31% using high triplet energy crosslinkable hole transport materials10.1002/adfm.201901025 ↗
17. Crosslinkable hole-transport materials for preparation of multilayer organic light emitting devices by spin-coating10.1002/(SICI)1521-3927(19990401)20:4<224::AID-MARC224>3.0.CO;2-6 ↗
18. All-solution-processed organic light-emitting diodes based on photostable photo-cross-linkable fluorescent small molecules10.1021/acsami.6b05197 ↗
19. A solvent-resistant azide-based hole injection/transporting conjugated polymer for fluorescent and phosphorescent light-emitting diodes10.1039/C5TC01794G ↗
20. Covalently bound hole-injecting nanostructures. Systematics of molecular architecture, thickness, saturation, and electron-blocking characteristics on organic light-emitting diode luminance, turn-on voltage, and quantum efficiency10.1021/ja051077w ↗
21. Perfluorocyclobutane-based arylamine hole-transporting materials for organic and polymer light-emitting diodes10.1002/adfm.200290002 ↗
22. Thermally crosslinked hole-transporting layers for cascade hole-injection and effective electron-blocking/exciton-confinement in phosphorescent polymer light-emitting diodes10.1063/1.2180882 ↗
23. A thermally cross-linked hole-transporting film with the remarkable solvent resistance for solution-processed OLEDs10.1016/j.orgel.2018.03.034 ↗
24. All solution-processed red organic light-emitting diode based on a new thermally cross-linked heteroleptic Ir(iii) complex10.1039/C8TC04138E ↗
25. Solution processed organic light-emitting diodes using a triazatruxene crosslinkable hole transporting material10.1039/C8RA07184E ↗
26. A high triplet energy small molecule based thermally cross-linkable hole-transporting material for solution-processed multilayer blue electrophosphorescent devices10.1039/C4TC02485K ↗
27. Recent progress in solution processable TADF materials for organic light-emitting diodes10.1039/C8TC01139G ↗
28. A 2,1,3-benzooxadiazole moiety in a D-A-D-type hole-transporting material for boosting the photovoltage in perovskite solar cells10.1021/acs.jpcc.7b04614 ↗
29. Core structure engineering in hole-transport materials to achieve highly efficient perovskite solar cells10.1002/cssc.201803025 ↗
30. Side-chain tunability via triple component random copolymerization for better photovoltaic polymers10.1002/aenm.201300864 ↗
31. 1-Ethynyl ethers as efficient thermal crosslinking system for hole transport materials in OLEDs10.1002/adfm.201603862 ↗
32. Low-temperature cross-linkable small molecules for fully solution-processed OLEDs10.1002/chem.201803308 ↗
33. A new cross-linkable 9,10-diphenylanthracene derivative as a wide bandgap host for solution-processed organic light-emitting diodes10.1039/C8TC05013A ↗
34. Sensitivity of redox and optical properties of electroactive carbazole derivatives to the molecular architecture and methoxy substitutions10.1021/acs.jpcc.8b02148 ↗
35. A thermally cured 9,9-diarylfluorene-based triaryldiamine polymer displaying high hole mobility and remarkable ambient stability10.1039/b900977a ↗
36. Kinetic model under light-limited condition for photoinitiated thiol-ene coupling reactions10.1021/acsomega.8b01725 ↗
37. Chemically doped hole transporting materials with low cross-linking temperature and high mobility for solution-processed green/red PHOLEDs10.1016/j.cej.2019.123479 ↗
38. Thiol-ene click chemistry10.1002/anie.200903924 ↗
39. Thiol-ene "click" reactions and recent applications in polymer and materials synthesis: a first update10.1039/C4PY00339J ↗
40. Facile thiol-ene thermal crosslinking reaction facilitated hole-transporting layer for highly efficient and stable perovskite solar cells10.1002/aenm.201601165 ↗
41. Space charges and traps in polymer electronics10.1109/TDEI.2006.247833 ↗
42. A solution-processed nanoscale COF-like material towards optoelectronic applications10.1007/s11426-020-9865-3 ↗