journal article·2021-04

Investigation of the mechanism of a facile method for ammonia treatment to effectively tune the morphology and conductivity of PEDOT:PSS films

Chung-Hui Hsieh, Chien-Hao Huang, Po-Lun Chu, Sheng-Yuan Chu, Peter Chen

Publisher page

Abstract

Abstract Although there are some advantages of PEDOT:PSS films, including high conductivity, high transparency to visible light, excellent water solubility, and being environmentally-friendly, PEDOT:PSS solutions are acidic owing to the PSS polymer with a –SO3H group donating the hydrogen ions. This results in the etching of the ITO surface as the PEDOT:PSS films are deposited on the ITO substrates using a spin coating process, which is attributed to the migration of indium and tin into the PEDOT:PSS film. In this paper, a PEDOT:PSS solution was treated with ammonia with different volume ratios prior to deposition. It is found that ammonia treatments can totally neutralize the hydrogen ions and reduce the A In 3 + / A In 3 + ( pristine ) atomic area ratio of PEDOT:PSS surface calculated from the XPS data due to the inhibition of the degradation at the PEDOT:PSS/ITO layer interface. Furthermore, the A SO 3 H / A SO 3 − on the PEDOT:PSS surface obviously changes with ammonia-treated solution at pH 7, which affects the surface energy of PEDOT:PSS film, helps improve the film roughness, and enhances the electrical conductivity of the films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Improving the performance and stability of perovskite light-emitting diodes by a polymeric nanothick interlayer-assisted grain control process10.1021/acsomega.0c00758 ↗
2. Stability of the interface between indium-tin-oxide and poly (3, 4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
3. Blocking reactions between indium-tin oxide and poly (3, 4-ethylene dioxythiophene): poly (styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
4. Effect of indium and tin contamination on the efficiency and electronic properties of organic bulk hetero-junction solar cells10.1016/j.solmat.2011.07.012 ↗
5. The Effects of dilute sulfuric acid on sheet resistance and transmittance in poly (3, 4-thylenedioxythiophene): poly (styrenesulfonate) films10.1155/2013/843410 ↗
6. Poly (3, 4-ethylenedioxythiophene)(PEDOT) derivatives: innovative conductive polymers for bioelectronics10.3390/polym9080354 ↗
7. The modified PEDOT:PSS as cathode interfacial layer for scalable organic solar cells10.1016/j.orgel.2019.05.012 ↗
8. A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT: PSS films10.1016/j.orgel.2013.12.023 ↗
9. Microscopical investigations of PEDOT: PSS thin films10.1002/adfm.200801258 ↗
10. The effects of the PEDOT: PSS acidity on the performance and stability of P3HT: PCBM-based OSCs10.1007/s10854-018-0055-4 ↗
11. Study of solvent-doped PEDOT: PSS layer on small molecule organic solar cells10.1016/j.synthmet.2012.12.008 ↗
12. Electrochemical characterization of the solvent-enhanced conductivity of poly(3,4-ethylenedioxythiophene) and its application in polymer solar cells10.1039/b822729b ↗
13. Study of the effect of DMSO concentration on the thickness of the PSS insulating barrier in PEDOT:PSS thin films10.1016/j.synthmet.2010.05.010 ↗
14. Enhancement of the thermoelectric properties of PEDOT:PSS thin films by post-treatment10.1039/c3ta11209h ↗
15. Influence of doped PEDOT:PSS on the performance of polymer solar cells10.1016/j.solmat.2011.04.040 ↗
16. The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)- poly(styrenesulfonate) (PEDOT-PSS) plastic electrodes10.1021/cm061032+ ↗
17. Effect of solvent on PEDOT/PSS nanometer-scaled thin films: XPS and STEM/AFM studies10.1016/j.synthmet.2009.07.032 ↗
18. Effect of molecular weight of additives on the conductivity of PEDOT: PSS and efficiency for ITO-free organic solar cells10.1039/c3ta11726j ↗
19. High-efficiency hybrid solar cells by nanostructural modification in PEDOT: PSS with co-solvent addition10.1039/c3ta14590e ↗
20. Glycerol-doped poly(3,4-ethylenedioxy-thiophene):Poly(styrene sulfonate) buffer layer for improved power conversion in organic photovoltaic devices10.1149/1.3196243 ↗
21. Fine patterning of glycerol-doped PEDOT:PSS on hydrophobic PVP dielectric with ink jet for source and drain electrode of OTFTs10.1016/j.orgel.2010.01.028 ↗
22. Improving the conductivity of hole injection layer by heating PEDOT:PSS10.1117/12.795039 ↗
23. The solvent treatment effect of the PEDOT: PSS anode interlayer in inverted planar perovskite solar cells10.1039/C5RA25787E ↗
24. High performance planar structure perovskite solar cells using a solvent dripping treatment on hole transporting layer10.3390/coatings10020127 ↗
25. PEDOT:PSS interfaces stabilised using a PEGylated crosslinker yield improved conductivity and biocompatibility10.1039/C9TB01028A ↗
26. Microscopical investigations of PEDOT: PSS thin films10.1002/adfm.200801258 ↗
27. The Effects of dilute sulfuric acid on sheet resistance and transmittance in poly (3, 4-thylenedioxythiophene): poly (styrenesulfonate) films10.1155/2013/843410 ↗
28. The temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses10.1039/C4TC01593B ↗
29. Enhancement of electrical conductivity of poly (3, 4-ethylenedioxythiophene)/poly (4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
30. Morphology, conductivity, and wetting characteristics of PEDOT: PSS thin films deposited by spin and spray coating10.1016/j.apsusc.2015.02.128 ↗
31. Influence of solution heating on the properties of PEDOT:PSS colloidal solutions and impact on the device performance of polymer solar cells10.1016/j.orgel.2011.07.003 ↗
32. Influence of controlled acidity of hole-collecting buffer layers on the performance and lifetime of polymer: fullerene solar cells10.1021/jp2028615 ↗
33. Thermal imprinting and vapor annealing of interfacial layers for high-performance organic light-emitting diodes10.1039/C9TC03074C ↗
34. Anion effect on salt-induced conductivity enhancement of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) films10.1016/j.orgel.2010.04.007 ↗
35. X.Wang, G.Lu, M. Zhang, Y. Gao, Y. Liu, L. Zhou, and Z. Lin, “High performance planar structure perovskite solar cells using a solvent dripping treatment on hole transporting layer.” Coatings, vol. 10, no. 2, pp. 127. 2020.10.3390/coatings10020127 ↗
36. Highly conductive In-SnO2/RGO nano-heterostructures with improved lithium-ion battery performance10.1038/srep25860 ↗