Pivotal factors in solution-processed, non-fullerene, all small-molecule organic solar cell device optimization
Source abstract
Abstract
Abstract The importance of device structure and active-layer processing when screening non-fullerene acceptors was demonstrated through the organic solar cell device performance optimization of a solution processable non-fullerene, all small-molecule bulk heterojunction (BHJ) blend. Key tuning parameters were identified; notably, the largest improvement in performance was achieved by switching from the conventional device architecture (ITO/PEDOT:PSS/D-A BHJ/Ca/Al) to an inverted structure (ITO/ZnO/D-A BHJ/MoOx/Ag), approximately doubling the power conversion efficiency from best cells of 0.5%–1.0%, demonstrating the importance of investigating more than a single architecture when screening novel non-fullerene acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
2. Molecular materials for organic photovoltaics: small is beautiful10.1002/adma.201305999 ↗
3. High performance photovoltaic applications using solution-processed small molecules10.1021/ar400088c ↗
4. Design and synthesis of molecular donors for solution-processed high-efficiency organic solar cells10.1021/ar400136b ↗
5. Molecular bulk heterojunctions: an emerging approach to organic solar cells10.1021/ar900041b ↗
6. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
7. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
8. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
9. Non-fullerene acceptors for organic solar cells10.1134/S181123821401010X ↗
10. Key components to the recent performance increases of solution processed non-fullerene small molecule acceptors10.1039/C5TA04310G ↗
11. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
12. Material and energy intensity of fullerene production10.1021/es103860a ↗
13. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
14. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
15. Perylene–diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
16. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
17. Non-fullerene organic solar cells with 6.1% efficiency through fine-tuning parameters of the film-forming process10.1021/cm504140c ↗
18. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
19. Fullerene-free organic solar cells with an efficiency of 3.7% based on a low-cost geometrically planar perylene diimide monomer10.1039/C4TA02851A ↗
20. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
21. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
22. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor
23. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
24. An electron-deficient small molecule accessible from sustainable synthesis and building blocks for use as a fullerene alternative in organic photovoltaics10.1002/cphc.201402662 ↗
25. Phthalimide-based π-conjugated small molecules with tailored electronic energy levels for use as acceptors in organic solar cells10.1039/C5TC01877C ↗
26. Film morphology of high efficiency solution-processed small-molecule solar cells10.1002/adfm.201300099 ↗
27. Non-basic high-performance molecules for solution-processed organic solar cells10.1002/adma.201201127 ↗
28. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
29. Role of trace impurities in the photovoltaic performance of solution processed small-molecule bulk heterojunction solar cells10.1039/c2sc20157g ↗
30. Detection and role of trace impurities in high-performance organic solar cells10.1039/c3ee40556g ↗
31. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
32. Rhodanine dye-based small molecule acceptors for organic photovoltaic cells10.1039/C4CC01695E ↗
33. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
34. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
35. Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers10.1016/j.orgel.2013.07.016 ↗
36. Beyond fullerenes: design of nonfullerene acceptors for efficient organic photovoltaics10.1021/ja508472j ↗
37. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
38. Driving vertical phase separation in a bulk-heterojunction by inserting a poly(3-hexylthiophene) layer for highly efficient organic solar cells10.1063/1.3541648 ↗
39. Device characteristics of bulk-heterojunction polymer solar cells are independent of interfacial segregation of active layers10.1021/cm200320u ↗
40. Electrical performance of organic solar cells with additive-assisted vertical phase separation in the photoactive layer10.1002/aenm.201300612 ↗
41. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
42. Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing10.1002/pip.794 ↗