Enhancing light extraction efficiency of organic light-emitting diodes by embedding tungsten trioxide islands or network structure pattern-transferred from a self-assembled deliquesce cesium chloride mask
Source abstract
Abstract
Abstract We present a new and simple method to improve internal light out-coupling of organic light emitting diodes (OLEDs) by incorporating tungsten trioxide (WO3) islands or network structure in the devices. These structures were pattern-transferred from a cesium chloride (CsCl) film that self-assembled into the islands or network structure as it deliquesced in air. The size and type of structures could be controlled with the thickness of the CsCl film, the relative humidity, the developing time and the developing temperature. The WO3 patterned structures scattered light in the OLEDs devices to extract light trapped in the waveguide modes. As a result, the current efficiencies, external quantum efficiencies and power efficiencies of the WO3 patterned OLEDs were increased compared with those of a conventional OLED without WO3 layer. Operating voltages of the devices with WO3 layer were significantly decreased because the WO3 layer facelifted the hole injection of the devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Semiconductor Lasers and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Emission characteristics of organic light-emitting diodes and organic thin-films with planar and corrugated structures10.3390/ijms11041527 ↗
2. Organic electroluminescent diodes10.1063/1.98799 ↗
3. Recent developments in light extraction technologies of organic light emitting diodes10.1007/s13391-011-0601-1 ↗
4. Enhancing light extraction efficiency of polymer light-emitting diodes with a 12-fold photonic quasi crystal10.1364/OE.21.022090 ↗
5. Improvement of output coupling efficiency of organic light-emitting diodes by backside substrate modification10.1063/1.126124 ↗
6. Improved light out-coupling in organic light emitting diodes employing ordered microlens arrays10.1063/1.1435422 ↗
7. Organic light emitting devices with enhanced outcoupling via microlenses fabricated by imprint lithography10.1063/1.2356904 ↗
8. Method to evaluate the enhancement of luminance efficiency in planar OLED light emitting devices for microlens array10.1364/OPEX.12.005777 ↗
9. Microporous phase-separated films of polymer blends for enhanced outcoupling of light from OLEDs10.1364/OE.19.0A1272 ↗
10. Light extraction from organic light-emitting diodes enhanced by spontaneously formed buckles10.1038/nphoton.2010.7 ↗
11. Organic light-emitting diodes with photonic crystals on glass substrate fabricated by nanoimprint lithography10.1063/1.2713237 ↗
12. Enhanced light out-coupling of organic light-emitting devices using embedded low-index grids10.1038/nphoton.2008.132 ↗
13. Enhancing waveguided light extraction in organic LEDs using an ultra-low-index grid10.1364/OL.35.001052 ↗
14. A high-extraction-efficiency nanopatterned organic light-emitting diode10.1063/1.1577823 ↗
15. Enhanced light extraction efficiency from organic light emitting diodes by insertion of a two-dimensional photonic crystal structure10.1063/1.1815049 ↗
16. Efficiency enhancement of microcavity organic light emitting diodes10.1063/1.116858 ↗
17. Design of multiwavelength resonant cavities for white organic light-emitting diodes10.1063/1.1527708 ↗
18. Optical outcoupling enhancement in organic light-emitting diodes: highly conductive polymer as a low-index layer on microstructured ITO electrodes10.1002/adma.200903375 ↗
19. Improved light extraction efficiency in organic light emitting diodes with a perforated WO 3 hole injection layer fabricated by use of colloidal lithography10.1364/OE.20.00A309 ↗
20. Extracting optical modes of organic light-emitting diodes using quasi-periodic WO 3 nanoislands10.1364/OE.21.005424 ↗
21. Mesoscopic hemisphere arrays for use as resist in solid state structure fabrication10.1116/1.590875 ↗
22. Structural fabrication using cesium chloride island arrays as a resist in a fluorocarbon reactive ion etching plasma10.1149/1.1390953 ↗
23. Measuring the efficiency of organic light-emitting devices10.1002/adma.200302151 ↗
24. Organic light emitting diodes with environmentally and thermally stable doped graphene electrodes10.1039/C4TC01224K ↗
25. Highly efficient simplified organic light emitting diodes10.1063/1.2784176 ↗
26. Enhanced performance of organic light emitting device by insertion of conducting/insulating WO 3 anodic buffer layer10.1016/j.synthmet.2005.03.019 ↗