Light enhancement of plasmonic nano-structure for PLEDs at RGB wavelengths
Source abstract
Abstract
Abstract In this work, a simple, rapid, and low-cost sputtering system was used to deposit Ag-Au composite nanoparticles (CNPs) onto an indium titanium oxide (ITO) anode for polymer light-emitting diodes (PLEDs) at room temperature. These Ag-Au CNPs on ITO surface serve as the resonators of electrons to result in a broader absorption under the visible light irradiation. The interlayer does not act as electron blocking layer, but hole injection enhancement by electron injection does seem to occur. Because of the localized surface plasmon resonance emission, the luminance efficiencies of the blue-, green-, and red-emitting PLEDs with Ag-Au CNPs increased by approximately 1.5-fold, compared to those of the reference devices. This method provided with the production of chemically stable Ag-Au CNPs under ambient conditions is well suited for enhancing the emission of large-area PLEDs in full color.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gold and Silver Nanoparticles Synthesis and Applications · Quantum Dots Synthesis And Properties · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. High PLED enhancement by surface plasmon coupling of Au nanoparticles10.1007/s11468-014-9803-3 ↗
2. Substantial performance improvement in inverted polymer light-emitting diodes via surface plasmon resonance induced electrode quenching control10.1021/am5033764 ↗
3. Efficiency improvement of a vertical light-emitting diode through surface plasmon coupling and grating scattering10.1364/OE.22.00A842 ↗
4. Enhanced luminescence efficiency of Ag nanoparticles dispersed on indium tin oxide for polymer light-emitting diodes10.1364/OE.21.026236 ↗
5. High polymer-LEDs enhancement by exciton–plasmon coupling using encapsulated metallic nanoparticles10.1016/j.orgel.2013.04.033 ↗
6. Light enhancement of plasmonic nanostructures for polymer light-emitting diodes at different wavelengths10.1143/APEX.5.062001 ↗
7. Reduction of the efficiency droop effect of a light-emitting diode through surface plasmon coupling10.1063/1.3459151 ↗
8. Facile synthesis of Ag nanocubes and Au nanocages10.1038/nprot.2007.326 ↗
9. Plasmonic characteristics of Ag and ITO/Ag ultrathin films as-grown by sputtering at room temperature and after heating10.1088/0022-3727/46/29/295302 ↗
10. Self-assembled monolayer-modified Ag anode for top-emitting polymer light-emitting diodes10.1063/1.2404589 ↗
11. Exploitation of localized surface plasmon resonance10.1002/adma.200400271 ↗
12. Nanoscale charge transport in an electroluminescent polymer investigated by conducting atomic force microscopy10.1063/1.1509464 ↗
13. Nanoscale surface electrical properties of aluminum zinc oxide thin films investigated by scanning probe microscopy10.1063/1.3042237 ↗
14. Work function changes of treated indium-tin-oxide films for organic light emitting diodes investigated using scanning surface potential microscopy10.1063/1.1884245 ↗
15. Surface plasmon enhanced photoluminescence of conjugated polymers10.1063/1.2721134 ↗
16. Enhanced dye fluorescence over silver island films: analysis of the distance dependence10.1080/00268979300102851 ↗
17. Surface treatments of indium tin oxide films by using high density plasma10.1016/j.tsf.2011.04.076 ↗
18. Surface conditioning of indium-tin oxide anodes for organic light-emitting diodes10.1016/S0040-6090(03)01185-4 ↗
19. X-ray photoemission spectroscopy studies of Sn-doped indium-oxide films10.1063/1.324149 ↗
20. Electron and hole transport in poly (p-phenylene vinylene) devices10.1063/1.116583 ↗
21. Consistent time-of-flight mobility measurements and polymer light-emitting diode current-voltage characteristics10.1063/1.124021 ↗
22. Electrical transport characteristics of single-layer organic devices from theory and experiment10.1063/1.2058199 ↗
23. Electric-field and temperature dependence of the hole mobility in poly (p-phenylene vinylene)10.1103/PhysRevB.55.R656 ↗
24. Temperature- and field-dependent electron and hole mobility in polymer light-emitting diodes10.1063/1.123959 ↗
25. Enhanced optical second harmonic generation in hybrid polymer nanoassemblies based on coupled surface plasmon resonance of a gold nanoparticle array10.1063/1.2219086 ↗
26. Characterization of thin-metal anode buffers in organic devices, Microwave Opt
27. Surface plasmon-enhanced electroluminescence in organic light-emitting diodes incorporating Au nanoparticles10.1063/1.3675970 ↗
28. Surface plasmon-waveguide hybrid polymer light-emitting devices using hexagonal Ag dots10.1364/OL.37.000761 ↗