journal article·2015-10

Efficient ternary blend polymer solar cells with a bipolar diketopyrrolopyrrole small molecule as cascade material

Wenqing Liu, Hangqi Shi, Weifei Fu, Lijian Zuo, Ling Wang, Hongzheng Chen

Publisher page

Abstract

Abstract We present a ternary strategy to enhance the power conversion efficiency (PCE) of bulk heterojunction polymer solar cells (PSCs) with a bipolar small molecule as cascade material. A bipolar diketopyrrolopyrrole small molecule (F(DPP)2B2), as the second electron acceptor, was incorporated into poly(3-hexylthiophene) (P3HT): [6,6]-phenyl-C61-butyric-acidmethyl-ester (PC61BM) blend to fabricate ternary blend PSCs. The introduction of the bipolar compound F(DPP)2B2 can not only broaden the light absorption of the active layer because of its absorption in near infrared region but also play a bridging role between P3HT and PC61BM due to the cascaded energy level structure, thus improving the charge separation and transportation. The optimized ternary PSC with 5 wt% F(DPP)2B2 content delivered a high PCE of 3.92% with a short-circuit current density (Jsc) of 9.63 mA cm−2, an open-circuit voltage (Voc) of 0.62 V and a fill factor (FF) of 64.90%, showing an 23% improvement of PCE as compared to the binary systems based on P3HT:PC61BM (3.18%) or P3HT:F(DPP)2B2 (3.17%). The results indicate that the ternary PSCs with a bipolar compound have the potential to surpass high-performance binary PSCs after carefully device optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Organic solar cells10.1002/adma.19910030303 ↗
2. Organic photovoltaics10.1039/b812502n ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Solution-processable polymeric solar cells: a review on materials, strategies and cell architectures to overcome 10%10.1016/j.orgel.2015.01.014 ↗
5. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
6. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
7. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
8. How to design low bandgap polymers for highly efficient organic solar cells10.1016/j.mattod.2013.12.005 ↗
9. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
10. Charge carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance10.1016/j.orgel.2015.03.013 ↗
11. Plasmonic-enhanced organic photovoltaics: breaking the 10% efficiency barrier10.1002/adma.201203323 ↗
12. Recent advances in plasmonic organic photovoltaics
13. Au nanoparticles on ultrathin MoS2 sheets for plasmonic organic solar cells10.1039/C4TA03178D ↗
14. Highly efficient organic tandem solar cells: a follow up review10.1039/c3ee40388b ↗
15. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
16. Microcavity-enhanced light-trapping for highly efficient organic parallel tandem solar cells10.1002/adma.201402782 ↗
17. Tandem small molecule organic photovoltaic cells with broad spectral response up to 1μm and a high open-circuit voltage10.1016/j.orgel.2014.08.047 ↗
18. Organic ternary solar cells: a review10.1002/adma.201300623 ↗
19. Guided crystallization of P3HT in ternary blend solar cell based on P3HT:PCPDTBT:PCBM10.1039/C4EE02004A ↗
20. IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells10.1039/c3ee24512h ↗
21. Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells10.1021/ja3112143 ↗
22. Ternary mixing: a simple method to tailor the morphology of organic solar cells10.1016/j.orgel.2009.05.028 ↗
23. Vacuum deposited ternary mixture organic solar cells10.1016/j.orgel.2014.12.021 ↗
24. Performance improvement of low bandgap polymer bulk heterojunction solar cells by incorporating P3HT10.1016/j.orgel.2014.08.018 ↗
25. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
26. Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
27. Synergistic effect of polymer and small molecules for high-performance ternary organic solar cells10.1002/adma.201404902 ↗
28. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
29. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
30. 25th anniversary article: rise to power – opv-based solar parks10.1002/adma.201302031 ↗
31. Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%10.1039/C4TA04733H ↗
32. Simultaneous improvement in short circuit current, open circuit voltage, and fill factor of polymer solar cells through ternary strategy10.1021/acsami.5b00308 ↗
33. Ternary bulk heterojunction photovoltaic cells composed of small molecule donor additive as cascade material10.1021/jp504365y ↗
34. Improved efficiency of bulk heterojunction polymer solar cells by doping low-bandgap small molecules10.1021/am500074s ↗
35. Solution processed bulk heterojunction polymer solar cells with low band gap DPP-CN small molecule sensitizer10.1016/j.orgel.2012.05.015 ↗
36. A solution-processable bipolar diketopyrrolopyrrole molecule used as both electron donor and acceptor for efficient organic solar cells10.1039/C4TA06035K ↗
37. Near IR sensitization of organic bulk heterojunction solar cells: towards optimization of the spectral response of organic solar cells10.1002/adfm.200901473 ↗
38. Near-infrared photoresponse sensitization of solvent additive processed poly(3-hexylthiophene)/fullerene solar cells by a low band gap polymer10.1063/1.4742143 ↗
39. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
40. An ester-functionalized diketopyrrolopyrrole molecule with appropriate energy levels for application in solution-processed organic solar cells10.1039/C2TA00148A ↗