Ink formulation of in-situ crosslinkable hole-transporting composite for multilayer inkjet-printed organic light-emitting diodes
Source abstract
Abstract
Abstract Inkjet printing is considered to be the most promising technique for high-resolution, large-scale and low-cost organic light-emitting diode (OLED) displays. However, the device performance with multilayer printing is still a challenge that needs to be tackled, because of the serious re-dissolving problem of bottom film into the subsequent ink during printing processes. This work demonstrates an in-situ crosslinkable composite of hole-transporting polymer poly(N-vinylcarbazole) (PVK) and oxidative coupling agent phosphomolybdic acid (PMA) without ultra-violet irradiation or high temperature annealing treatment. The hole-transporting ink is formulated by adding high-boiling point solvents including o-dichlorobenzene, butyl benzoate, cyclohexylbenzene and 1-chloronaphthalene to eliminate the coffee ring effect. Their influence on the ink property is systematically investigated, and the corresponding solidification mechanism is also proposed. The modified PVK:PMA ink leads to a crosslinked hole-transporting layer (HTL) with an excellent solvent resistance and temperature-independent property. Finally, the emitting layer is successfully inkjet-printed onto this HTL, and multilayer inkjet-printed OLEDs are achieved with a current efficiency of 21.7 cd/A. In summary, this in-situ crosslinkable hole-transporting composite ink is facile and effective for multilayer inkjet-printed OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Recent advances in white organic light-emitting diodes10.1016/j.mser.2016.06.001 ↗
2. Recent advances in flexible organic light-emitting diodes10.1039/C6TC03230C ↗
3. Development of high performance OLEDs for general lighting10.1039/c2tc00584k ↗
4. Organic light-emitting diodes: pushing toward the limits and beyond10.1002/adma.201907539 ↗
5. Approaches for fabricating high efficiency organic light emitting diodes10.1039/C4TC02495H ↗
6. Materials and devices toward fully solution processable organic light-emitting diodes10.1021/cm101937p ↗
7. Blended host ink for solution processing high performance phosphorescent OLEDs10.1038/s41598-019-43359-4 ↗
8. Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating10.1038/ncomms2002 ↗
9. Inkjet printing of organic electronics-comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
10. Highly efficient inkjet printed flexible organic light-emitting diodes with hybrid hole injection layer10.1016/j.orgel.2020.105822 ↗
11. Efficient, inkjet-printed TADF-OLEDs with an ultra-soluble NHetPHOS complex10.1007/s00339-016-9726-2 ↗
12. Novel phosphorescent iridium(iii) emitters for both vacuum-deposition and inkjet-printing of OLEDs with exceptionally high efficiency10.1039/C9TC00441F ↗
13. Iridium(III)-Complexed polydendrimers for inkjet-printing OLEDs: the influence of solubilizing steric hindrance groups10.1021/acsami.9b07238 ↗
14. Inkjet-printed small-molecule organic light-emitting diodes: halogen-free inks, printing optimization, and large-area patterning10.1021/acsami.7b13355 ↗
15. Pyridine-based electron-transport materials with high solubility, excellent film-forming ability, and wettability for inkjet-printed OLEDs10.1021/acsami.7b12190 ↗
16. Review of recent progress in multilayer solution-processed organic light-emitting diodes10.1117/1.JPE.5.057611 ↗
17. Solution-processed double-layer electron‐transport layer for conventional blue phosphorescent organic light-emitting diodes10.1002/adom.201600244 ↗
18. Bright blue solution processed triple-layer polymer light-emitting diodes realized by thermal layer stabilization and orthogonal solvents10.1002/adfm.201300360 ↗
19. Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices10.1039/b907991m ↗
20. An arylphosphine oxide and phosphonate combination as a solution processable electron injection layer for power-efficient PLEDs10.1039/C8TC05961F ↗
21. An alcohol-soluble and ion-free electron transporting material functionalized with phosphonate groups for solution-processed multilayer PLEDs10.1039/C6CC06435C ↗
22. Probing molecular dynamics with attosecond resolution using correlated wave packet pairs10.1038/nature01430 ↗
23. Crosslinkable hole-transporting materials for solution processed polymer light-emitting diodes10.1039/b804977g ↗
24. Crosslinkable triphenylamine-based hole-transporting polymers for solution-processed polymer light-emitting diodes10.1016/j.orgel.2017.10.038 ↗
25. Facile photo-crosslinking of azide-containing hole-transporting polymers for highly efficient, solution-processed, multilayer organic light emitting devices10.1002/adfm.201401958 ↗
26. Crosslinkable TAPC-based hole-transport materials for solution-processed organic light-emitting diodes with reduced efficiency roll-off10.1002/adfm.201201197 ↗
27. Solution-processed thermally activated delayed fluorescent OLED with high EQE as 31% using high triplet energy crosslinkable hole transport materials10.1002/adfm.201901025 ↗
28. Solution-based electrical doping of semiconducting polymer films over a limited depth10.1038/nmat4818 ↗
29. Instant low-temperature cross-linking of poly(N-vinylcarbazole) for solution-processed multilayer blue phosphorescent organic light-emitting devices10.1002/adma.201402726 ↗
30. Surface initiated oxidative crosslinking of a polymeric hole transport material for improved efficiency and lifetime in soluble organic light-emitting diodes10.1016/j.orgel.2016.08.027 ↗
31. Simultaneous cross-linking and P-doping of a polymeric semiconductor film by immersion into a phosphomolybdic acid solution for use in organic solar cells10.1039/C6CC01022A ↗
32. Direct electrochemical nanopatterning of polycarbazole monomer and precursor polymer films: ambient formation of thermally stable conducting nanopatterns10.1021/la0517686 ↗
33. Effect of solvents, their mixture and thermal annealing on the performance of solution processed polymer light-emitting diodes10.3390/ma6051994 ↗
34. Coffee-ring-free quantum dot thin film using inkjet printing from a mixed-solvent system on modified ZnO transport layer for light-emitting devices10.1021/acsami.6b08679 ↗
35. Multifunctional crosslinkable iridium complexes as hole transporting/electron blocking and emitting materials for solution-processed multilayer organic light-emitting diodes10.1002/adfm.200801071 ↗
36. Crosslinked conjugated polymers as hole transport layers in high-performance quantum dot light-emitting diodes10.1039/C6NH00217J ↗
37. Efficient all-solution processed quantum dot light emitting diodes based on inkjet printing technique10.1021/acsami.7b05381 ↗
38. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
39. Patterning of pinhole free small molecular organic light-emitting films by ink-jet printing10.1016/j.orgel.2011.01.027 ↗
40. Packing and sorting colloids at the contact line of a drying drop10.1021/la104055j ↗
41. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
42. Controlling the polymer ink's rheological properties and viscoelasticity to suppress satellite droplets10.1016/j.polymer.2018.01.052 ↗
43. Morphology modulation of direct inkjet printing by incorporating polymers and surfactants into a sol-gel ink system10.1021/acs.langmuir.8b00745 ↗
44. A solution-processed heteropoly acid containing MoO3 Units as a hole-injection material for highly stable organic light-emitting devices10.1021/acsami.6b06723 ↗
45. Realizing 22.3% EQE and 7-fold lifetime enhancement in QLEDs via blending polymer TFB and cross-linkable small molecules for a solvent-resistant hole transport layer10.1021/acsami.0c01001 ↗
46. Inkjet-printed quantum dot light-emitting diodes with an air-stable hole transport material10.1021/acsami.7b00615 ↗
47. Minimal size of coffee ring structure10.1021/jp912190v ↗
48. Inkjet printing of thermally activated delayed fluorescence (TADF) dendrimer for OLEDs applications10.1016/j.orgel.2019.07.011 ↗
49. Symmetric and uniform coalescence of ink-jetting printed polyfluorene ink drops by controlling the droplet spacing distance and ink surface tension/viscosity ratio10.1016/j.polymer.2017.03.023 ↗