journal article·2021-10

Additive-free organic solar cells with enhanced efficiency enabled by unidirectional printing flow of high shear rate

Yongzhe Li, Lingling Deng, Gengxin Du, Yaxing Li, Xinyan Zhao, Weiwei Deng

Publisher page

Abstract

Abstract High-performance OSCs prepared by scalable techniques without additives are highly desirable because residual additives may cause gradual deterioration of the photoactive-layer morphology and device performance. Printing flows with high shear rate have the potential to replace additives by inducing higher degree of ordered stacking and crystallinity of organic molecules, as well as favorable phase separation. Here, PTQ10:Y6 organic solar cells (OSCs) without any additives were fabricated by a scalable and robust processing approach termed as soft porous blade printing (SPBP). The fluid flow and drying process of the wet films made by SPBP, blade coating and spin coating are visualized by high speed imaging, which reveals that the blade coating and SPBP introduce unidirectional flow while the wet film interference pattern of spin coating is irregular and random. The simplified flow model of SPBP suggests that the shear rate could be as high as ~1000 s−1. The additive-free SPBP produces photoactive-layer with adequate morphology, which could be attributed to three intrinsic properties of SPBP: very high shear rate, flow assisted crystallizations induced by microstructures of the soft porous blade, and numerous nucleation sites generated as the liquid contact line follows the motion of the blade. The additive-free SPBP device demonstrates weaker charge recombination, higher and more balanced charge transport, and consequently better device performance than the spin-coated and blade-coated devices with 0.25 vol% 1,8-diioctane (DIO). SPBP achieved power conversion efficiency (PCE) of 16.45%, which is higher than those of spin-coated and blade-coated counterparts doped with DIO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
2. Graphdiyne derivative as multifunctional solid additive in binary organic solar cells with 17.3% efficiency and high reproductivity10.1002/adma.201907604 ↗
3. Morphology control strategies for solution-processed organic semiconductor thin films10.1039/C4EE00688G ↗
4. The meniscus-guided deposition of semiconducting polymers10.1038/s41467-018-02833-9 ↗
5. Tuning conformation, assembly, and charge transport properties of conjugated polymers by printing flow10.1126/sciadv.aaw7757 ↗
6. Balancing the pre-aggregation and crystallization kinetics enables high efficiency slot-die coated organic solar cells with reduced non-radiative recombination losses10.1039/D0EE00774A ↗
7. Hot hydrocarbon-solvent slot-die coating enables high-efficiency organic solar cells with temperature-dependent aggregation behavior10.1002/adma.202002302 ↗
8. Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells10.1038/ncomms3867 ↗
9. Promoting morphology with a favorable density of states using diiodooctane to improve organic photovoltaic device efficiency and charge carrier lifetimes10.1021/acsenergylett.7b00315 ↗
10. High-efficiency nonfullerene organic solar cells: critical factors that affect complex multi-length scale morphology and device performance10.1002/aenm.201602000 ↗
11. Effect of processing additives on organic photovoltaics: recent progress and future prospects10.1002/aenm.201601496 ↗
12. Blade-cast nonfullerene organic solar cells in air with excellent morphology, efficiency, and stability10.1002/adma.201800343 ↗
13. Solubility based identification of green solvents for small molecule organic solar cells10.1002/adfm.201301509 ↗
14. Hot slot die coating for additive-free fabrication of high performance roll-to-roll processed polymer solar cells10.1039/C8EE02221F ↗
15. Processing-friendly slot-die-cast nonfullerene organic solar cells with optimized morphology10.1021/acsami.9b12522 ↗
16. Flow-enhanced solution printing of all-polymer solar cells10.1038/ncomms8955 ↗
17. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
18. Dynamic-template-directed multiscale assembly for large-area coating of highly-aligned conjugated polymer thin films10.1038/ncomms16070 ↗
19. Mixed-flow design for microfluidic printing of two-component polymer semiconductor systems10.1073/pnas.2000398117 ↗
20. Soft porous blade printing of nonfullerene organic solar cells10.1021/acsami.0c04390 ↗
21. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
22. Side-chain impact on molecular orientation of organic semiconductor acceptors: high performance nonfullerene polymer solar cells with thick active layer over 400 nm10.1002/aenm.201800856 ↗
23. Understanding the morphology of high-performance solar cells based on a low-cost polymer donor10.1021/acsami.9b22666 ↗
24. High-performance organic thin-film transistors through solution-sheared deposition of small-molecule organic semiconductors10.1002/adma.200703120 ↗
25. Understanding interfacial alignment in solution coated conjugated polymer thin films10.1021/acsami.7b08133 ↗
26. Direct uniaxial alignment of a donor–acceptor semiconducting polymer using single-step solution shearing10.1021/acsami.6b01607 ↗
27. Tuning the morphology of solution-sheared P3HT:PCBM films10.1021/acsami.5b09349 ↗
28. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
29. Batchelor · 2000
30. Carrier dynamics and morphology regulated by 1,8-diiodooctane in chlorinated nonfullerene polymer solar cells10.1021/acs.jpclett.9b00063 ↗
31. Ultrafast spectroscopic investigation of the effect of solvent additives on charge photogeneration and recombination dynamics in non-fullerene organic photovoltaic blends10.1039/D0TC00773K ↗
32. Negative correlation between intermolecular vs intramolecular disorder in bulk-heterojunction organic solar cells10.1021/acsami.8b14628 ↗
33. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7:PC71BM solar cells10.1002/aenm.201200377 ↗
34. Intensity dependence of current–voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
35. Understanding the reduced efficiencies of organic solar cells employing fullerene multiadducts as acceptors10.1002/aenm.201200673 ↗
36. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
37. Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells10.1063/1.4913589 ↗
38. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
39. Charge-carrier mobility requirements for bulk heterojunction solar cells with high fill factor and external quantum efficiency >90%10.1002/aenm.201500577 ↗
40. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors10.1107/S0021889812050054 ↗
41. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors10.1107/S0021889809040126 ↗
42. Effects of 1,8-diiodooctane on ultrafast charge carrier dynamics and photovoltaic performance in organic solar cells: a comparison of PC71BM and nonfullerene acceptor IT-M10.1016/j.orgel.2020.105690 ↗
43. Bi-hierarchical nanostructures of donor–acceptor copolymer and fullerene for high efficient bulk heterojunction solar cells10.1039/c3ee24312e ↗
44. A review of grazing incidence small- and wide-angle X-ray scattering techniques for exploring the film morphology of organic solar cells10.1002/solr.202000337 ↗
45. Correlating three-dimensional morphology with function in PBDB-T:IT-M non-fullerene organic solar cells10.1002/solr.201800114 ↗