Dependence of the amorphous structures and photoluminescence properties of tris(8-hydroxyquinolinato)aluminum films on vacuum deposition conditions
Source abstract
Abstract
Abstract For further development of organic light-emitting diodes (OLEDs), an understanding of the amorphous structures and photoluminescence properties of organic emitting layers is needed. In this study, the molecular orientation, density, and photoluminescence properties of tris(8-hydroxyquinolinato)aluminum (Alq3) films vacuum-deposited using various substrate temperatures and deposition rates were investigated. The molecular orientation and density of the Alq3 films exhibited clear dependence on the substrate temperature, which was caused by the change of molecular kinetic mobility during deposition. We found that photoluminescence quenching was stronger in Alq3 films fabricated at lower substrate temperatures and higher deposition rates. This photoluminescence quenching was not related to molecular orientation and film density and likely originated from the inclusion of impurities in the films. These results indicate that decreasing the amount of impurities in films by increasing substrate temperature or decreasing deposition rate is crucial to achieve the maximum photoluminescence performance from films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Luminescence and Fluorescent Materials · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Advantages and disadvantages of vacuum-deposited and spin-coated amorphous organic semiconductor films for organic light-emitting diodes10.1039/C5TC01911G ↗
2. Organic glasses with exceptional thermodynamic and kinetic stability10.1126/science.1135795 ↗
3. How much time is needed to form a kinetically stable glass? AC calorimetric study of vapor-deposited glasses of ethylcyclohexane10.1063/1.4906806 ↗
4. Tunable molecular orientation and elevated thermal stability of vapor-deposited organic semiconductors10.1073/pnas.1421042112 ↗
5. Structural characterization of vapor-deposited glasses of an organic hole transport material with X-ray scattering10.1021/acs.chemmater.5b00583 ↗
6. Enhanced electrical properties and air stability of amorphous organic thin films by engineering film density10.1021/acs.jpclett.7b02808 ↗
7. High-performance organic light-emitting diodes comprising ultrastable glass layers10.1126/sciadv.aar8332 ↗
8. Device efficiency of organic light-emitting diodes: progress by improved light outcoupling10.1002/pssa.201228320 ↗
9. Selectively controlled orientational order in linear-shaped thermally activated delayed fluorescent dopants10.1021/cm500802p ↗
10. Influence of material impurities in the hole-blocking layer on the lifetime of organic light-emitting diodes10.1063/1.4972055 ↗
11. Influence of vacuum chamber impurities on the lifetime of organic light-emitting diodes10.1038/srep38482 ↗
12. Enhanced stability of organic light-emitting devices fabricated under ultra-high vacuum condition10.1016/j.cplett.2006.06.002 ↗
13. Performance and lifetime of vacuum deposited organic light-emitting diodes: influence of residual gases present during device fabrication10.1016/j.orgel.2014.07.014 ↗
14. Orientation control of linear-shaped molecules in vacuum-deposited organic amorphous films and its effect on carrier mobilities10.1002/adfm.200901684 ↗
15. Molecular orientation in small-molecule organic light-emitting diodes10.1039/c1jm13417e ↗
16. Method for measurement of the density of thin films of small organic molecules10.1063/1.2712932 ↗
17. Simple model-free estimation of orientation order parameters of vacuum-deposited and spin-coated amorphous films used in organic light-emitting diodes10.7567/APEX.8.096601 ↗
18. Influence of molecular shape on the thermal stability and molecular orientation of vapor-deposited organic semiconductors10.1021/acs.jpclett.7b01097 ↗
19. Simple accurate system for measuring absolute photoluminescence quantum efficiency in organic solid-state thin films10.1143/JJAP.43.7729 ↗
20. A chemical failure mechanism for aluminum(III) 8-hydroxyquinoline light-emitting devices10.1021/cm960152m ↗
21. Thermal and morphological effects on the hydrolytic stability of aluminum tris(8-hydroxyquinoline) (Alq 3)10.1021/cm970599a ↗
22. Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis10.1039/b514898g ↗