journal article·2018-11

Erbium (III) tris(8-hydroxyquinoline) doped zinc oxide interfacial layer for improved performance of polymer solar cells

B. Hari Babu, Chengkun Lv, Chengzhuo Yu, Pengqing Bi, Zhenchuan Wen, Xiaoyu Yang, Fenghong Li, Xiao-Tao Hao

Publisher page

Abstract

Abstract Erbium (III) tris(8-hydroxyquinoline) ErQ complex is emerging as a class of novel luminescent material for interfacial engineering to improve the performance of organic solar cells (OSCs). In the present work, ErQ doped ZnO solution has successfully been prepared by the sol-gel route at room temperature as an electron transport layer for high efficient OSCs. The modified ErQ:ZnO films can yield not only higher electron mobility, good surface quality by the passivation of ZnO defects, but also slightly higher work-function and thereby shortening in the leakage current, which subsequently enhanced power conversion efficiency (PCE). As a result, the remarkable PCE increasing from 3.62% to 4.26% for poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) and from 6.84% to 7.95% for polymer thieno [3,4-b] thiophene/benzodithiophene: [6,6] phenyl-C71-butyric acid methyl ester (PTB7:PCB71M) devices could be achieved upon an incorporating ErQ:ZnO interfacial layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
2. Polymer solar cells with efficiency >10% enabled via a facile solution processed Al-doped ZnO electron transporting layer10.1002/aenm.201500204 ↗
3. Photoconductive cathode interlayer for highly efficient inverted polymer solar cells10.1021/jacs.5b02168 ↗
4. Improving the compatibility of donor polymers in efficient ternary organic solar cells via post-additive soaking treatment10.1021/acsami.6b11063 ↗
5. Ternary organic solar cells offer 14 % power conversion efficiency10.1016/j.scib.2017.11.003 ↗
6. Thermostable single junction organic solar cells with a power conversion efficiency of 14.62 %10.1016/j.scib.2018.02.015 ↗
7. Energy-level modulation of small-molecule electron acceptors to achieve over 12 % efficiency in polymer solar cells10.1002/adma.201602776 ↗
8. Efficient organic solar cells employing ytterbium ion-doped zinc oxide as cathode transporting layer10.1016/j.orgel.2017.11.008 ↗
9. Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable organic photovoltaic cells10.1039/c3ta10537g ↗
10. An organic-inorganic hybrid interlayer for improved electron extraction in inverted polymer solar cells10.1039/C5TC03754A ↗
11. Reduction of charge Carrier recombination at ZnO-polymer blend interfaces in PTB7-based bulk heterojunction solar cells using regular device structure: impact of ZnO nanoparticle size and surfactant10.1021/acsami.7b01361 ↗
12. Aqueous solution processed photoconductive cathode interlayer for high performance polymer solar cells with thick interlayer and thick active layer10.1002/adma.201601615 ↗
13. Near-infrared photoluminescence of erbium tris(8-hydroxyquinoline) spin-coated thin films induced by low coherence light sources10.1063/1.2755933 ↗
14. Organo-erbium systems for optical amplification at telecommunications wavelengths10.1038/nmat3910 ↗
15. Near infrared and visible luminescence from Xerogels covalently grafted with lanthanide [Sm3+, Yb3+, Nd3+, Er3+, Pr3+, Ho3+] β-diketonate derivatives using visible light excitation10.1021/am402529w ↗
16. Infrared and visible electroluminescence from ErQ based OLEDs10.1016/S0379-6779(99)00433-6 ↗
17. Novel Er3+ perfluorinated complexes for broadband sensitized near infrared emission10.1021/cm8024445 ↗
18. Obtaining characteristic 4f-4f luminescence from rare earth chelates10.1002/adfm.200305169 ↗
19. Laser-induced crystallization and conformation control of poly(3-hexythiophene) for improving the performance of organic solar cells10.1016/j.orgel.2017.06.053 ↗
20. Optical, magnetic, electrochemical and electrical properties of 8-hydroxyquinoline-based complexes with Al3+, Cr3+, Mn2+, Co2+, Ni2+, Cu2+ and Zn2+10.1021/jp201019c ↗
21. Fullerene derivative doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
22. Environmentally friendly biomaterials as an interfacial layer for highly efficient and air-stable inverted organic solar cells10.1039/C4TA00152D ↗
23. N-type alcohol-soluble small molecules as an interfacial layer for efficient and stable polymer solar cell10.1021/acs.jpcc.5b07349 ↗
24. Boosted electron transport and enlarged built-in potential by eliminating the interface barrier in organic solar cells10.1021/acsami.6b15631 ↗
25. Efficiency and air-stability improvement of flexible inverted polymer solar cells using ZnO/Poly(ethylene glycol) hybrids as cathode buffer layers10.1021/am4013038 ↗
26. Dual Forster resonance energy transfer effects in non-fullerene ternary organic solar cells with the third component embedded in the donor and acceptor10.1039/C7TA01557G ↗
27. Performance enhancement of polymer solar cells with luminescent down-shifting sensitizer10.1063/1.4816383 ↗
28. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
29. Long-range balanced electron and hole transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗