Improved charge balance in phosphorescent organic light-emitting diodes by different ultraviolet ozone treatments on indium tin oxide
Source abstract
Abstract
Abstract Ultraviolet ozone (UVO) treatment of indium tin oxide (ITO) is a well-known technique to realize improved performance in organic light-emitting diodes (OLEDs). Herein, we report the comparison of UVO treatments on ITO at different energies (187 and 254 nm) in varying the charge balance in green phosphorescent OLEDs (Ph-OLEDs). The amounts and types of removed organic contaminants (such as -OH, C-C, C≡C, C=C, O=O, etc.) were observed to differ for each UVO energy. The 254-nm UVO treatment could not remove all the contaminants from the ITO surface, causing a decrease in hole injection (observed by hole-only device trends), due to the decrease in work function (WF) compared to the 187-nm-treated ITO. Moreover, the presence of large negatively charged O=O groups on the surface of 254-nm-treated ITO induced electronic repulsion (observed by electron-only device trends). However, remarkably, a suitable charge balance was attained by ITO treated with 254-nm UVO source over un-treated ITO, as well as with samples exposed to the higher-energy source (187 nm). The devices utilizing ITO treated with 254-nm UVO demonstrated the enhanced current efficiency of 67 cd/A, while the 187-nm UVO-treated and untreated ITO anodes exhibit those of 47 cd/A and 57 cd/A, respectively, at 5000 cd/m2. The variation in the WF of ITO with respect to different UVO sources and its role in the charge transport behaviors of the Ph-OLEDs were investigated in detail with contact angle measurements and interface barrier calculations through hole-only devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Influence of plasma treatment of ITO surface on the growth and properties of hole transport layer and the device performance of OLEDs10.1016/j.orgel.2007.08.002 ↗
2. Criteria for ITO (indium–tin-oxide) thin film as the bottom electrode of an organic light emitting diode10.1016/S0040-6090(02)00165-7 ↗
3. Effect of surface treatment and functionalization on the ITO properties for OLEDs10.1016/j.msec.2005.10.078 ↗
4. Surface modification of indium tin oxide by plasma treatment: an effective method to improve the efficiency, brightness, and reliability of organic light emitting devices10.1063/1.118575 ↗
5. Energy barrier, charge Carrier balance, and performance improvement in organic light-emitting diodes10.1063/1.3452344 ↗
6. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
7. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
8. Efficiency improvement of fluorescent OLEDs by tuning the working function of PEDOT: PSS using UV–ozone exposure10.1016/j.orgel.2010.02.014 ↗
9. The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes10.1016/j.orgel.2008.07.009 ↗
10. Post-treatment-Free solution-processed non-stoichiometric NiOx nanoparticles for efficient hole-transport layers of organic optoelectronic devices10.1002/adma.201405391 ↗
11. Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy10.1021/am900446x ↗
12. Effects of gold-nanoparticle surface and vertical coverage by conducting polymer between indium tin oxide and the hole transport layer on organic light-emitting diodes10.1021/acsami.5b04248 ↗
13. Enhanced performance of organic light emitting device by insertion of conducting/insulating WO3 anodic buffer layer10.1016/j.synthmet.2005.03.019 ↗
14. Surface conditioning of indium-tin oxide anodes for organic light-emitting diodes10.1016/S0040-6090(03)01185-4 ↗
15. Characteristics of a single-layer graphene field effect transistor with UV/ozone treatment10.1149/2.005301ssl ↗
16. Cleaning and functionalization of polymer surfaces and nanoscale carbon fillers by UV/ozone treatment: a review10.1177/0021998308337740 ↗
17. Enhanced performance of the OLED with plasma treated ITO and plasma polymerized thiophene buffer layer10.1016/j.cap.2006.10.013 ↗
18. Effect of ultraviolet–ozone treatment of indium–tin–oxide on electrical properties of organic light emitting diodes10.1063/1.1635995 ↗
19. Recombination zone control without sensing layer and the exciton confinement in green phosphorescent OLEDs by excluding interface energy transfer10.1021/acs.jpcc.7b11039 ↗
20. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
21. Enhanced device efficiency in organic light-emitting diodes by dual oxide buffer layer10.1016/j.orgel.2018.01.001 ↗
22. Device physics of organic light-emitting diodes based on molecular materials10.1016/S1566-1199(01)00009-X ↗
23. The Real Role of 4, 4'-Bis [N-[4-{N, N-bis (3-methylphenyl) amino} phenyl]-N-phenylamino] biphenyl (DNTPD) Hole Injection Layer in OLED: hole Retardation and Carrier Balancing10.5012/bkcs.2014.35.3.929 ↗
24. In situ measurements of work function of indium tin oxide after UV/ozone treatment10.2320/matertrans.MA201516 ↗
25. Hole injection enhancement in organic light emitting devices using plasma treated graphene oxide10.1016/j.apsusc.2016.11.110 ↗
26. Charge transport and injection to phenylamine-based hole transporters for OLEDs applications10.1109/JDT.2007.895342 ↗
27. Indium tin oxide surface treatments for improvement of organic light-emitting diode performance10.1007/s00339-003-2146-0 ↗
28. Maruzen · 1966
29. Generation of various carbon nanostructures in water using IR/UV laser ablation10.1088/0022-3727/46/16/165303 ↗
30. The effect of surface characteristics of reduced graphene oxide on the performance of a pseudocapacitor10.1088/2053-1583/2/1/014007 ↗
31. Synthesis of graphite oxide with different surface oxygen contents assisted microwave radiation10.3390/nano8020106 ↗
32. A rationalization of orientation and reactivity in the nucleophilic replacement reactions of aromatic polyhalo-compounds10.1016/S0040-4020(01)96958-3 ↗
33. Device characteristics of blue phosphorescent organic light-emitting diodes depending on the electron transport materials10.1080/15980316.2011.621323 ↗
34. Effects of triplet energies and transporting properties of Carrier transporting materials on blue phosphorescent organic light emitting devices10.1063/1.2994697 ↗