journal article·2017-11

Surface modification of polymeric substrates to enhance the barrier properties of an Al2O3 layer formed by PEALD process

Hyun Gi Kim, Jong Geol Lee, Sung Soo Kim

Publisher page

Abstract

Abstract Aluminum oxide (Al 2 O 3 ) layers were deposited on various polymeric substrates by a low frequency plasma-enhanced atomic layer deposition (PEALD) process. Polyethylene naphthalate (PEN), polyethylene terephthalate (PET), and polyethersulfone (PES) were tested as substrates for barrier films. Each substrate has its own characteristics to have influences on the Al 2 O 3 layer formation and penetration into the substrate, which greatly affected the barrier properties. Prior to the deposition process, polymeric substrates were pretreated in argon and oxygen plasmas, and surface energy was leveled up due to the formation of polar group. Characterizations of the Al 2 O 3 layer by Time of Flight - Secondary Ion Mass Spectrometry (ToF-SIMS) revealed that plasma treatment lowered the level of OH − in Al 2 O 3 layer. X-ray photoelectron microscopy (XPS) confirmed that A12p peak of Al 2 O 3 layer was shifted to a higher core level by plasma treatment. Density of the layer on the plasma treated surface was greater than that of untreated surface. It was found that plasma treatment of the surface had significant effects on the formation of the Al 2 O 3 layer, which much improved the barrier performance. Optical transmittance was little affected by plasma treatment and PEALD process. After oxygen plasma pretreatment, the WVTR of the Al 2 O 3 layer deposited on the plasma-treated PEN substrate was around 7.2 × 10 −4 g/m 2 day, which is significantly lower than that of the untreated substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Jeong · Appl. Phys. Lett. · 2008 · 93 · 03330110.1063/1.2955841 ↗
2. Kim · Macromol. Res. · 2012 · 20 · 73910.1007/s13233-012-0110-6 ↗
3. Rahy · Appl. Surf. Sci. · 2009 · 255 · 708410.1016/j.apsusc.2009.03.048 ↗
4. Cho · Thin Solid Films · 2008 · 516 · 788110.1016/j.tsf.2008.06.025 ↗
5. Choi · Prog. Polym. Sci. · 2008 · 33 · 58110.1016/j.progpolymsci.2007.11.004 ↗
6. Hah · Displays · 2008 · 29 · 47810.1016/j.displa.2008.04.001 ↗
7. Yan · Proc. IEEE · 2005 · 93 · 146810.1109/JPROC.2005.851483 ↗
8. Lim · Mater. Sci. Eng. B · 2005 · 121 · 21110.1016/j.mseb.2005.03.032 ↗
9. Carcia · J. Appl. Phys. · 2009 · 106 · 02353310.1063/1.3159639 ↗
10. Langereis · Appl. Phys. Lett. · 2006 · 89 · 08191510.1063/1.2338776 ↗
11. Wilson · Chem. Mater. · 2005 · 17 · 562510.1021/cm050704d ↗
12. Ferguson · Chem. Mater. · 2004 · 16 · 560210.1021/cm040008y ↗
13. Kormunda · Polym. Degrad. Stab. · 2012 · 97 · 54710.1016/j.polymdegradstab.2012.01.014 ↗
14. Edy · Nanoscale Res. Lett. · 2013 · 8 · 7910.1186/1556-276X-8-79 ↗
15. Lee · Thin Solid Films · 2013 · 534 · 51510.1016/j.tsf.2013.02.125 ↗
16. Carcia · J. Vac. Sci. Technol. A · 2013 · 31 · 06150710.1116/1.4816948 ↗
17. Ren · Surf. Interface Anal. · 2013 · 45 · 115810.1002/sia.5243 ↗
18. Gonzalez · Langmuir · 2008 · 24 · 1263610.1021/la802296c ↗
19. Lee · Curr. Appl. Phys. · 2014 · 14 · 55210.1016/j.cap.2013.11.053 ↗
20. Jung · J. Appl. Phys. · 2014 · 115 · 07350210.1063/1.4866001 ↗
21. Díaz · Corros. Sci. · 2011 · 53 · 216810.1016/j.corsci.2011.02.036 ↗
22. Lee · Thin Solid Films · 2013 · 534 · 51510.1016/j.tsf.2013.02.125 ↗
23. Kim · J. Electrochem. Soc. · 2006 · 153 · F6910.1149/1.2177047 ↗
24. Liu · J. Aerosol Sci. · 2008 · 39 · 97410.1016/j.jaerosci.2008.06.006 ↗
25. Lide · 2012 · 10