journal article·2012-11

Kinetics of charge transfer processes in organic solar cells: Implications for the design of acceptor molecules

Paul E. Schwenn, Ke Gui, Yuliang Zhang, Paul L. Burn, Paul Meredith, Benjamin J. Powell

Organic Electronics· Volume 13· Issue 11
Publisher page

Abstract

We report the electronic properties of a new class of non-fullerene electron acceptor molecules with electron affinities tunable over an approximately 1 eV range. This tunability allows us to vary the thermodynamic driving force for electron transfer (Δ G°) such that it is equal-and-opposite-to the reorganization energy for the ionized states ( λ). We utilize this design principle, derived from Marcus–Hush theory, to optimize the rate of charge transfer in blends of these acceptors with poly(3- n-hexylthiophene-2,5-diyl) (P3HT) – a standard organic solar cell donor material. We show that computationally inexpensive calculations can be used to parameterize Marcus–Hush theory so as to correctly predict whether quenching will occur. Arguments based solely on energetics are common in the literature and we show that such theories do not predict the trends observed in our photoluminescence quenching experiments. This is the case whether the energies determined from experiments [cyclic voltammetry (CV) and the optical gap] or calculated from density functional theory for the solid state. We predict essentially barrier-less photoelectron transfer (PET) from P3HT to the acceptor 2-[{7-(9,9-di- n-propyl-9 H-fluoren-2-yl)benzo[ c] [1], [2], [5] thiadiazol-4-yl}methylene]malononitrile (or K12), consistent with the experimental photoluminescence quenching efficiencies found for P3HT:K12 blends. Our results clearly show that energetics alone is not sufficient to predict PET between the acceptor–donor pair, and that kinetics are an important determining factor.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Photochemistry and Electron Transfer Studies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
2. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
3. High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
4. For simplicity and pedagogy we neglect the absorption by acceptor materials in this introduction. Nevertheless, it should be noted that this, followed by hole transfer to the donor, does make a significant contribution to the photocurrent in organic solar cells (see Ref. [45] and [46]).
5. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
6. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
7. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
8. J. Bloking, X. Han, M.D. McGehee, A. Sellinger, Synthesis of non-fullerene based electron acceptors bearing diketopyrrolopyrrole and dicyanoimidazole moieties for applications in organic photovoltaics, Presented at Proc. MRS Spring Symposium, 0012 (2011) p. 1–xx.
9. A small molecule non-fullerene electron acceptor for organic solar cells10.1002/aenm.201000024 ↗
10. Efficient polymer solar cells based on M3EH-PPV10.1021/cm050148n ↗
11. Organic super-acceptors with efficient intramolecular charge-transfer interactions by [2+2] cycloadditions of TCNE, TCNQ, and F4-TCNQ to donor-substituted cyanoalkynes10.1002/chem.200802563 ↗
12. Solution processable low bandgap diketopyrrolopyrrole (DPP) based derivatives: novel acceptors for organic solar cells10.1039/b924404b ↗
13. Strain and Hückel aromaticity: driving forces for a promising new generation of electron acceptors in organic electronics10.1002/anie.200905117 ↗
14. N-type conjugated materials based on 2-vinyl-4,5-dicyanoimidazoles and their use in solar cells10.1021/cm070144d ↗
15. Intermolecular interactions of perylene diimides in photovoltaic blends of fluorene copolymers: disorder effects on photophysical properties, film morphology and device efficiency10.1002/adfm.200800356 ↗
16. Phenyl vs alkyl polythiophene: a solar cell comparison using a vinazene derivative as acceptor10.1021/cm903067a ↗
17. Halogenated boron subphthalocyanines as light harvesting electron acceptors in organic photovoltaics10.1002/aenm.201100036 ↗
18. Dependence of charge separation efficiency on film microstructure in poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-c61 butyric acid methyl ester blend films10.1021/jz900296f ↗
19. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
20. Compositional dependence of the performance of poly(p-phenylene vinylene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200400345 ↗
21. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
22. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
23. Analysis of the image force effects on the recombination at the donor-acceptor interface in organic bulk heterojunction solar cells10.1016/j.cplett.2009.01.043 ↗
24. Comparison of the electrical characteristics of four 2,5-substituted poly(p-phenylene vinylene) derivatives with different side chains10.1016/j.tsf.2005.12.036 ↗
25. Charge dissociation in polymer:fullerene bulk heterojunction solar cells with enhanced permittivity10.1063/1.3039191 ↗
26. Origin of the efficiency improvement in all-polymer solar cells upon annealing10.1063/1.2772185 ↗
27. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends10.1021/ja8012598 ↗
28. Calculation of solid state molecular ionisation energies and electron affinities for organic semiconductors10.1016/j.orgel.2010.11.025 ↗
29. Organic photovoltaics: mechanism, materials, and devices
30. Brabec · 2003
31. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
32. Analysis of charge photogeneration as a key determinant of photocurrent density in polymer:fullerene solar cells10.1002/adma.201002357 ↗
33. Charge carrier formation in polythiophene/fullerene blend films studied by transient absorption spectroscopy10.1021/ja076568q ↗
34. Acceptor energy level control of charge photogeneration in organic donor/acceptor blends10.1021/ja1042726 ↗
35. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
36. Experimental test for geminate recombination applied to organic solar cells10.1103/PhysRevB.82.121301 ↗
37. Bulk heterojunction solar cells with large open-circuit voltage: electron transfer with small donor-acceptor energy offset10.1002/adma.201190074 ↗
38. Energetics of excited states in the conjugated polymer poly(3-hexylthiophene)10.1103/PhysRevB.81.085202 ↗
39. Electron transfer reactions in chemistry. Theory and experiment10.1103/RevModPhys.65.599 ↗
40. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
41. Low-band-gap conjugated polymers based on thiophene, benzothiadiazole, and benzobis(thiadiazole)10.1021/ma052683e ↗
42. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
43. Synthesis and characterization of a low bandgap conjugated polymer for bulk heterojunction photovoltaic cells10.1002/1616-3028(200108)11:4<255::AID-ADFM255>3.0.CO;2-I ↗
44. A flexible n-type organic semiconductor for optoelectronics10.1039/C1JM14089B ↗
45. Understanding and improving solid-state polymer/C60-fullerene bulk-heterojunction solar cells using ternary porphyrin blends10.1021/jp0748664 ↗
46. Ultrafast studies of charge generation in PCBM:P3HT blend films following excitation of the fullerene PCBM10.1021/jp8050774 ↗
47. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
48. Dibenzo[b,def]chrysene derivatives: solution-processable small molecules that deliver high power-conversion efficiencies in bulk heterojunction solar cells10.1021/cm9028337 ↗
49. General atomic and molecular electronic structure system10.1002/jcc.540141112 ↗
50. The molecular surface package10.1016/0263-7855(93)87010-3 ↗
51. Photoinduced charge generation and recombination dynamics in model donor/acceptor pairs for organic solar cell applications: a full quantum-chemical treatment10.1021/ja042390l ↗
52. Quantum mechanical continuum solvation models10.1021/cr9904009 ↗
53. Calculation of electron affinity, ionization potential, transport gap, optical band gap and exciton binding energy of organic solids using ‘solvation’ model and DFT10.1016/j.orgel.2009.06.011 ↗
54. Dicyanovinyl–substituted oligothiophenes: structure-property relationships and application in vacuum-processed small molecule organic solar cells10.1002/adfm.201001639 ↗
55. Cyanation: providing a three-in-one advantage for the design of n-type organic field-effect transistors10.1002/chem.200601803 ↗
56. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
57. Solid state solvation in amorphous organic thin films10.1103/PhysRevLett.91.247403 ↗