Circuital modelling of S-shape removal in the current–voltage characteristic of TiO x inverted organic solar cells through white-light soaking
Source abstract
Abstract
Abstract In this work light activation phenomenon in inverted bulk heterojunction (BHJ) organic solar cells (OSC) has been electrically modelled with a two-diode equivalent circuit. OSC are based on poly(3-hexylthiophene) (P3HT): 1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6) C61 (PCBM) with a titanium oxide (TiOx) sublayer. Current–voltage (I–V) characteristics show a highly pronounced S-shape that is gradually removed during light activation process. The circuit used to model I–V curves includes two diodes in forward and reverse bias together with two parallel resistances, RP1 and RP2. The parallel of the reverse bias diode and its corresponding resistance RP2 models the electrical behaviour of the TiOx interlayer. This interlayer has been thermally treated at different temperatures, from 80 °C up to 180 °C, reducing the activation time from 400 s for unbaked devices down to 30 s for devices annealed at temperatures higher than 80 °C. The S-shape shown in the I–V characteristic is completely removed after a few minutes of white-light illumination. I–V curves recorded during the activation process have been fitted with the analytical solution of the two-diode circuit based on W-Lambert function. A decrease of the subcircuit 2 equivalent resistance has been found to be the cause of S-shape removal. This resistance diminishing is in good agreement with the increase of TiOx conductance with baking temperature and white-light exposure time found by other authors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Economic assessment of solar electricity production from organic-based photovoltaics modules in a domestic environment10.1039/c1ee01766g ↗
2. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
3. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
4. S-shaped current–voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
5. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
6. Imbalanced mobilities causing S-shaped IV curves in planar heterojunction organic solar cells10.1063/1.3553764 ↗
7. Understanding the origin of the S-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations10.1063/1.4817396 ↗
8. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
9. Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy10.1021/am900446x ↗
10. Understanding S-shaped current–voltage characteristics in organic solar cells containing a TiOx interlayer with impedance spectroscopy and equivalent circuit analysis10.1021/jp305206d ↗
11. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
12. Transient characteristics of inverted polymer solar cells using titanium oxide interlayers10.1063/1.3455108 ↗
13. Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer
14. Evolution with annealing of solar cell parameters modelling the S-shape of the current–voltage characteristic10.1016/j.solmat.2012.04.048 ↗
15. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
16. Highly durable inverted-type organic solar cell using amorphous titanium oxide as electron collection electrode inserted between ITO and organic layer10.1016/j.solmat.2008.06.012 ↗
17. Towards an understanding of light activation processes in titanium oxide based inverted organic solar cells10.1063/1.4764026 ↗
18. Organic photovoltaic materials and devices10.1016/S1631-0705(02)01335-X ↗
19. An equivalent circuit approach to organic solar cell modelling10.1016/j.mejo.2008.01.053 ↗
20. An improved solar cell circuit model for organic solar cells10.1016/j.solmat.2005.05.017 ↗
21. Origin of the kink in current–density versus voltage curves and efficiency enhancement of polymer-C60 heterojunction solar cells10.1109/JSTQE.2010.2040807 ↗
22. Exact analytical solution of a two diode circuit model for organic solar cells showing S-shape using Lambert W-functions10.1016/j.solener.2012.07.010 ↗
23. Lumped parameter modelling of organic solar cells’ S-Shaped I–V characteristics10.1109/JPHOTOV.2012.2219503 ↗
24. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗