journal article·2010-11Open access

Electroluminescence characterization of FOLED devices under two type of external stresses caused by bending

Chien-Jung Chiang, Chris Winscom, Andy Monkman

Organic Electronics· Volume 11· Issue 11

Abstract

Abstract Conventional organic light emitting diode (OLED) devices were fabricated on a plastic substrate with the structure of aluminum (100 nm)/lithium fluoride (0.8 nm)/tris–(8-hydroxyquinoline) aluminum (Alq3) (40 nm)/N,N′-bis(naphthalen-1-yl)–N,N′-bis(phenyl)benzidine (NPB) (50 nm)/indium-tin-oxide (ITO) (100 nm)/polyethylene terephthalate (PET) (0.127 mm). The devices were then bent with three designated radii of curvature, some in a concave direction and others in a convex direction, to apply either a tensile or compressive stress to the OLED layers. The brightness was then measured while the device was bent while supplying a constant current. Atomic force microscopy (AFM) images of the OLED devices surface (the aluminum surface) after the bending tests were shown to compare the damage caused by the different type of the stresses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.