Optimizing the oxidation level of PEDOT anode in air-PEDOT battery
Source abstract
Abstract
Abstract We report an air-PEDOT battery where an optimized oxidation level of the PEDOT anode was performed using a simple dedoping process, resulting in batteries with high stability in air. Some PEDOT:PSS chains were reduced to their neutral state, preserving their good electrical conductivity, by dipping the PEDOT:PSS films into mixtures of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and dimethyl sulfoxide (DMSO). Because of the neutral PEDOT chains are susceptible to being reoxidized in air, polyethyleneimine (PEI) was coated on these DMSO-DBU/PEDOT:PSS anodes to ensure their air stability and to maintain their low level of oxidation during the battery operation. The difference in the oxidation level between the dedoped PEDOT:PSS and pristine PEDOT:PSS electrodes produces an open circuit voltage of about 0.80 V almost constant by several days (around 30 days) in air. These batteries present discharge currents of ≈2 μA with an electrical load of 0.1 MΩ during 10 h of operation, output powers of ≈1.2 μW, using an electrical load of 265 kΩ, which is in the required range for powering wireless transceiver and sensors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. F. Jonas and W. Krafft, E. Pat., 440 957, 1990.
2. Elschner · 2011
3. Modification of PEDOT: PSS as hole injection layer in polymer LEDs10.1002/pssa.200404338 ↗
4. Influence of controlled acidity of hole-collecting buffer layers on the performance and lifetime of polymer:fullerene solar cells10.1021/jp2028615 ↗
5. Transparent, plastic low-work function poly(3,4-ethylenedioxythiophene) electrodes10.1021/cm061081m ↗
6. Toward all-plastic flexible light emitting diodes10.1016/j.cplett.2006.11.007 ↗
7. An all-polymer-air PEDOT battery10.1016/j.orgel.2011.12.018 ↗
8. Enhanced thermoelectric properties of PEDOT: PSS nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
9. Novel solution-processable, dedoped semiconductors for application in thermoelectric devices10.1039/C4TA01839G ↗
10. High rates of oxygen reduction over a vapor phase-polymerized PEDOT electrode10.1126/science.1159267 ↗
11. Hilder · J. Power Sources · 2009 · 194 · 113510.1016/j.jpowsour.2009.06.054 ↗
12. Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications10.1016/j.orgel.2015.08.007 ↗
13. Organic thermogenerators for energy autarkic systems on flexible substrates10.1088/0022-3727/41/13/135113 ↗
14. Visible luminescence of dedoped DBU-treated PEDOT: PSS films10.1021/acs.jpcc.5b04016 ↗
15. 1,8-Diazabicyclo[5.4.0]undec-7-ene (DBU) as ligand for atom transfer radical polymerization (ATRP)10.1016/j.eurpolymj.2005.01.013 ↗
16. Ishikawa · 2009
17. Nucleophilic catalysis with 1,8-Diazabicyclo[5.4.0]undec-7-ene (DBU) for the esterification of carboxylic acids with dimethyl carbonate10.1021/jo011036s ↗
18. The DBU-H2O complex as a new catalyst for aldol condensation reactions10.1016/j.catcom.2008.03.047 ↗
19. Enhancement of electrical conductivity of poly (3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
20. Modified PEDOT-PSS as source/drain electrodes for device performance enhancement of P3HT thin film transistors10.1109/TED.2005.855062 ↗
21. Solvent effect of inkjet printed source/drain electrodes on electrical properties of polymer thin-film transistors10.1063/1.2177642 ↗
22. Thermoelectric performance of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)10.1088/0256-307X/25/6/076 ↗
23. Conformational modification of conducting polymer chains by solvents: small-angle X-ray scattering study10.1016/j.cplett.2006.05.014 ↗
24. Study of the effect of DMSO concentration on the thickness of the PSS insulating barrier in PEDOT: PSS thin films10.1016/j.synthmet.2010.05.010 ↗
25. Enhancement of the electrical conductivity in PEDOT: PSS films by the addition of dimethyl sulfate10.1021/jp107386x ↗
26. Formation of polystyrene sulfonic acid surface structures on poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) thin films and the enhancement of its conductivity by using sulfuric acid10.1016/j.tsf.2012.12.050 ↗
27. Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes10.1016/0022-0728(94)87085-3 ↗
28. In situ spectroelectrochemical characterization of poly(3,4-ethylenedioxythiophene)10.1016/S0013-4686(98)00405-8 ↗
29. Molecular reorientation and structural changes in cosolvent-treated highly conductive PEDOT: PSS electrodes for flexible indium tin oxide-free organic electronics10.1021/jp501540y ↗
30. Synth. Met. Electrochemical oxidation of poly(3,4-ethylenedioxythiophene) “in situ” conductivity and spectroscopic investigations10.1016/S0379-6779(99)00271-4 ↗
31. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
32. In situ spectroelectrochemical Raman studies of poly(3,4-ethylenedioxythiophene) (PEDT)10.1021/ma9905674 ↗
33. Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes10.1016/0022-0728(94)87085-3 ↗
34. In situ spectroelectrochemical characterization of poly(3,4-ethylenedioxythiophene)10.1016/S0013-4686(98)00405-8 ↗
35. A morphological model for the solvent-enhanced conductivity of PEDOT: PSS10.1002/adfm.200700796 ↗
36. Bard · 2001