journal article·2009-11

Enhanced carrier balance by organic salt doping in single-layer polymer light-emitting devices

Dong-Hyun Lee, Jong Hyeok Park, Heeyeop Chae, Sung M. Cho

Organic Electronics· Volume 10· Issue 7
Publisher page

Abstract

Abstract We have showed that the doping of an organic salt into a PVK-based polymer emissive layer could enhance the carrier balance greatly to result in higher luminance and luminous efficiency. It is found out that the salt-doped devices show the similar operating characteristics of frozen-junction light-emitting electrochemical cells (LECs). With the salt doping of 0.6 wt.% and an appropriate salt activation process, the fabricated PVK-based polymer light-emitting diodes (PLEDs) shows the luminous efficiency of 15 cd/A at the highest luminance of 55,000 cd/m2 even without an electron-injecting LiF layer. Due to the enhanced carrier balance, the luminous efficiency is found to be maintained from the turn-on voltage to the voltage for the maximum luminance, which means a linear relationship between luminance and current density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Polymer light-emitting electrochemical cells10.1126/science.269.5227.1086 ↗
2. Polymer light-emitting electrochemical cells with frozen p–i–n junction at room temperature10.1002/(SICI)1521-4095(199803)10:5<385::AID-ADMA385>3.0.CO;2-M ↗
3. Polymer light-emitting electrochemical cells: a theoretical study of junction formation under steady-state conditions10.1021/jp973415o ↗
4. Polymer light-emitting electrochemical cells with frozen junctions10.1063/1.371408 ↗
5. Phosphorescent light-emitting electrochemical cell10.1063/1.1525881 ↗
6. Planar polymer light-emitting electrochemical cells with extremely large interelectrode spacing10.1063/1.1618948 ↗
7. Long-lifetime polymer light-emitting electrochemical cells10.1002/adma.200602087 ↗
8. Polymer light-emitting electrochemical cells for high-efficiency, low-voltage electroluminescent devices10.1109/JDT.2007.896737 ↗
9. Enhanced electron injection and electroluminescence in poly(N-vinyl carbazole) film doped with ammonium salt10.1016/S0379-6779(00)01505-8 ↗
10. Transition phenomenon in salt-doped organic electroluminescent devices at high bias voltage10.1080/713738577 ↗
11. Effective ionic charge polarization using typical supporting electrolyte and charge injection phenomena in molecularly doped polymer light-emitting diodes10.1063/1.1513886 ↗
12. Enhanced light emission from phosphorescent single-layered organic light-emitting devices doped with ionic salt by simultaneous thermal and electrical annealing10.1063/1.2786030 ↗
13. Solution processable ionic p–i–n phosphorescent organic light-emitting diodes10.1063/1.2963032 ↗
14. Polymer light-emitting electrochemical cells with frozen p–i–n junction10.1063/1.119875 ↗
15. Polymer light-emitting electrochemical cells: frozen-junction operation of an “ionic liquid” device10.1063/1.1999009 ↗
16. High-efficiency polymer light-emitting devices using organic salts: a multilayer structure to improve light-emitting electrochemical cells10.1063/1.1490635 ↗
17. Electrochemical investigations on poly(phenylene-1,3,4-oxadiazoles)10.1016/0014-3057(93)90014-7 ↗
18. Formation of ion pairs and carrier transport in undoped and dye-doped poly(N-vinylcarbazole) films10.1143/JPSJ.60.2031 ↗
19. Synthesis and characterization of a novel bipolar polymer for light-emitting diodes10.1039/a807975g ↗
20. D’Angelo · Solid-State Electron. · 2007 · 51 · 12310.1016/j.sse.2006.11.008 ↗
21. Burin · J. Phys. Chem. A · 2000 · 104 · 470410.1021/jp994162x ↗
22. Hochfilzer · Appl. Phys. Lett. · 1998 · 73 · 225410.1063/1.121693 ↗